0ZRE0055FF1A

defining a degree of excellence Radial Leaded PTC 0ZRE1007D 0ZRE Series RoHS6 Compliant Electrical Characteristics (23°C) Application Line Voltage Power Supply, Transformer and Appliances Product Features Continuous Use at Voltages up to 240V AC/DC, Low Hold Current, 265V AC/DC Max Interrupt Voltage Operating (Hold Current) Range 50mA ~ 550mA Maximum Operating Voltage 240VAC/DC Maximum Interrupt Voltage 265VAC/DC Temperature Range -40°C to 85°C Agency Approval TUV (Std. EN60738-1-1, Cert. R50102173) UL Component (Std. UL1434, File E305051) UL Conditions of Acceptability: 1.These devices have been investigated for use in safety circuits and are suitable as a limiting device. Hold current-maximum current at which the device will not trip in still air at 23°C. IH Trip current-minimum current at which the device will always trip in still air at 23°C. IT Imax Maximum fault current device can withstand without damage at rated voltage (Vmax). Vmax Maximum voltage device can withstand without damage at its rated current. Typical power dissipated by device when in tripped state in 23°C still air environment. Pd Rmin Minimum device resistance at 23°C. Rmax Maximum device resistance at 23°C. R1max Maximum device resistance at 23°C, 1 hour after initial device trip. Physical specifications Lead material 0ZRE0005 ~ 0ZRE0016 - Tin plated copper clad steel, 24AWG. 0ZRE0025 ~ 0ZRE0040 - Tin plated copper, 22AWG. 0ZRE0055 - Tin plated copper, 20AWG. Product Dimensions Fig 1 Fig 2 Soldering characteristics MIL-STD-202, Method 208E. Insulating coating Flame retardant epoxy, meets UL-94-V-0 requirements. All dimensions in mm PTC Marking “bel” or “b”, IH code and “RE”. ø Standard Package Specifications subject to change without notice Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel:201 - 432 - 0463 • Fax:201 - 432 - 9542 • E-Mail: belfuse@belfuse.com Website:www.belfuse.com defining a degree of excellence Radial Leaded PTC 0ZRE Series Typical Time - To - Trip at 23°C RoHS6 Compliant 0ZRE1007C (See Elec. Characteristics Table for P/N - Curve Correlation) ABCDEFGH Time - To - Trip (S) Fault Current (A) Cautionary Notes Thermal Derating Curve 1. Operation beyond the specified maximum ratings or improper use may result in damage 2. These Polymer PTC (PPTC) devices are intended for protection against occasional overcurrent/ overtemperature fault conditions and may not be suitable for use in applications where repeated and/ or prolonged fault conditions are anticipated. 3. Avoid contact of PTC device with chemical solvent. Prolonged contact may adversely impact the PTC performance. 4. These PTC devices may not be suitable for use in circuits with a large inductance, as the PTC trip can generate circuit voltage spikes above the PTC rated voltage. Ambient Temperature (°C) Specifications subject to change without notice Corporate Office Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 Tel: 201-432-0463 Fax: 201-432-9542 E-Mail: belfuse@belfuse.com Website: www.belfuse.com Percent Of Rated Hold And Trip Current Far East Office Bel Fuse Ltd. 8F/8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel: 852-2328-5515 Fax: 852-2352-3706 European Office Industriestrasse 20 61381 Friedrichdorf Germany Tel: 49.6172.9552.0 Fax: 49.6172.9552.40 Bel Stewart GmbH