5MT4

5 x 20mm Glass Tube Type 5MT / 5MTP Medium Blow Fuse Series 5MTD0903 Electrical Characteristics Testing current 100% 135% 200% 1000% Blow Time Minimum Maximum 4 Hrs. N/A N/A 1 Hr N/A 15 Sec 10 mSec N/A Vßpc Approvals Safety Agency Approvals V Listed File No. E20624 ß (UL/CSA STD. 248-14) Certified File No. LR39772 p JFEilTe1N03o7. -J3E1T010033-71-03013003-1001, Type Amp range / Volt @ I.R.ability 5MT / 5MTP 5MT / 5MTP File No. JET1037-31003-1002 5MT 100mA. - 800mA / 250V AC@ 35A 1A. - 3A / 250V AC@ 100A 100mA - 5A / 125V AC@ 10,000A Ampere Rating 5MT (P) 100 100mA 12 1.7 0.02 0.04 0.30 5MT (P) 125 125mA 8 1.4 0.04 0.07 0.32 5MT (P) 160 160mA 5 1.2 0.06 0.11 0.34 5MT (P) 200 200mA 3.4 1.0 0.11 0.18 0.36 5MT (P) 250 250mA 2.2 0.9 0.18 0.30 0.38 5MT (P) 300 300mA 1.5 0.7 0.31 0.50 0.37 5MT (P) 375 375mA 1.1 0.6 0.47 0.75 0.40 5MT (P) 500 500mA 0.6 0.53 0.9 1.4 0.43 5MT (P) 600 600mA 0.4 0.45 1.5 2.3 0.45 5MT (P) 750 750mA 0.3 0.39 2.3 3.5 0.49 1A 0.2 0.32 4.2 6.4 0.49 5MT (P) 1.25 1.25A 0.1 0.27 7.2 10.6 0.52 5MT (P) 1.6 1.6A 0.08 0.23 12.1 17.7 0.55 2A 0.05 0.19 20 29 0.59 2.5A 0.04 0.18 35 49 0.65 3A 0.030 0.172 58 82 0.74 3.5A 0.026 0.167 76 105 0.84 5MT (P) 4 4A 0.022 0.162 99 136 0.9 5MT (P) 5 5A 0.017 0.152 167 226 1.1 5MT (P) 1 5MT (P) 2 5MT (P) 2.5 1A. - 5A / 125V AC@ 500A >5A. - 15A /125V AC@ 300A Operating Temperature: -55ºC to +125ºC Typical Volt-drop Melting I2T Melting I2T Maximum Cold @100% In < 10 mSec @10 In Power Resistance Dissipation 2 2 (ohm) (Volt) max. (A Sec) (A Sec) (W) Catalog Number 5MT (P) 3 5MT (P) 3.5 Consult manufacturer for other ratings Physical Specification Packaging 1. In bulk: 5MT - 1,000 pcs per box; 5MTP - 500 pcs per box 2. On Axial Tape & Reel: 1,500 pcs per reel 3. Tape & Reel specification: per EIA-296-E & IEC 286-1 @ 10mm Pitch and 63.5mm inside Tape Spacing Mechanical Dimensions 5MT 1.5" ± 0.08" (38.1 ± 2mm) 0.787" ± 0.02" (20 ± 0.5mm) 0.20" ± 0.004" (5.1 ± 0.1mm) 0.827" ± 0.02" (21.0 ± 0.5mm) 0.217" ± 0.004" (5.5 ± 0.1mm) 5MTP SEE LEAD SIZE LISTED IN “ MATERIAL” Specifications subject to change without notice Materials Glass body / Nickel Plated Brass Caps Lead wire : Tin-lead plated Copper, Diameter 0.032", 5A and less Diameter 0.040", 6A and above Marking: On fuse: “bel”, “5MT”, “Current Rating”, “Voltage Rating”, and “Appropriate Safety Logos” On label: Above info plus “c” and interrupting rating Voltage on fuse: 250V for 100mA to 3A; 125V for rating above 3A ORDERING INFORMATION SEE PAGES 67 & 68 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel: 201-432-0463 • Fax: 201-432-9542 • E-Mail: belfuse@belfuse.com Website: www.belfuse.com 51 5 x 20mm Glass Tube Type 5MT / 5MTP Medium Blow Fuse Series 5MTC0801 - 100mA - 125mA - 160mA - 200mA - 250mA - 300mA - 375mA - 500mA - 600mA - 750mA - 1A - 1.25A - 1.6A - 2A - 2.5A - 3A - 3.5A - 4A - 5A 5MT / 5MTP - TIME CURRENT CHARACTERISTIC CURVE 10000 TIME IN SECONDS 1000 100 10 0.1 0.01 0.01 0.1 1 10 100 1000 CURRENT IN AMPERES Specifications subject to change without notice 1 NOTE - see important information under “User Guide”on P.08 Corporate Office Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 Tel: 201-432-0463 Fax: 201-432-9542 E-Mail: belfuse@belfuse.com Website: www.belfuse.com Far East Office Bel Fuse Ltd. 8F/8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel: 852-2328-5515 Fax: 852-2352-3706 European Office Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Preston PR1 8UD Lancashire, U.K Tel: 44-1772-556601 Fax: 44-1772-888366 52