5SF3.15

5 x 20mm Glass Tube Type 5SF / 5SFP Quick-acting Fuse Series (Low Breaking Capacity) Catalog Number 1.5 In 2.1 In MIN MAX 2.75 In MIN MAX 4 In MIN MAX 80mA 6.8 0.93 0.003 0.003 0.39 5SF (P) 100 100mA 4.9 0.84 0.005 0.005 0.44 5SF (P) 125 125mA 3.5 0.76 0.009 0.008 0.50 5SF (P) 160 160mA 2.5 0.68 0.017 0.015 0.57 10 In 5SF (P) 200 200mA 1.8 0.62 0.030 0.028 0.64 MAX 5SF (P) 250 250mA 1.3 0.56 0.05 0.05 0.73 5SF (P) 315 315mA 0.9 0.50 0.10 0.09 0.83 5SF (P) 400 400mA 0.67 0.45 0.17 0.17 0.94 5SF (P) 500 500mA 0.25 0.14 0.40 0.40 0.12 5SF (P) 630 630mA 0.19 0.13 0.64 0.65 0.15 5SF (P) 800 800mA 0.14 0.13 1.01 1.04 0.20 1A 0.11 0.12 1.6 1.7 0.27 5SF (P) 1.25 1.25A 0.08 0.11 2.5 2.7 0.35 5SF (P) 1.6 1.6A 0.06 0.11 4.0 4.4 0.47 2A 0.04 0.10 6.4 7.0 0.62 5SF (P) 2.5 2.5A 0.03 0.10 10.2 11.4 0.82 5SF (P) 3.15 80mA to 100mA 1 30 10 0.5 3 100 20 125mA and above 1 30 50 2 10 300 20 hr. min. ms sec ms ms ms Approvals sdmrSc Safety Agency Approvals s m Amp range / Volt @ I.R. ability 80mA - 6.3A / 250V AC@ 35A or 10 In whichever is greater Certificate No. EI264 r Recognized File No. E20624 S Acceptance File No. LR39772 5SF (P) 1 5SF (P) 2 Certificate No. 0035174 / 0046197 d Licence No. 85637 80mA - 10A / 250V AC@ 35A or 10 In whichever is greater Operating Temperature -55ºC to +125ºC Physical Specification Materials Glass body / Nickel Plated Brass Caps Lead wire: Tin-lead plated Copper, Diameter 0.032", 6.3A and less Diameter 0.040", 8A and above Marking On fuse: “bel”, “F”, “Current Rating”, “L”, “250V”, and "Appropriate Safety Logos" On label: Above info plus “5SF” or “5SFP” “c” and interrupting rating Packaging 1. In bulk: 5SF - 1,000 pcs per box; 5SFP - 500 pcs per box 2. On Axial Tape & Reel: 1,500 pcs per reel 3. Tape & Reel specification: per EIA-296-E & IEC 286-1 @ 10mm Pitch and 63.5mm inside Tape Spacing Typical Volt-drop Melting I2T Melting I2T Maximum Cold @100% In < 10 mSec @10 In Power Resistance Dissipation (ohm) (Volt) max. (A2 Sec) (A2 Sec) (W) 5SF (P) 80 Electrical Characteristics (IEC-127-2 STANDARD SHEET 2) Rated Current Ampere Rating 3.15A 0.025 0.09 16 18 1.08 5SF (P) 4 4A 0.019 0.09 26 30 1.43 5SF (P) 5 5A 0.014 0.08 41 48 1.89 5SF (P) 6.3 6.3A 0.011 0.08 65 74 2.50 5SF (P) 8 8A 0.008 0.08 103 119 3.30 5SF (P) 10 10A 0.006 0.07 163 192 4.37 Consult manufacturer for other ratings Mechanical Dimensions 5SF 1.5" ± 0.08" (38.1 ± 2mm) 0.787" ± 0.02" (20 ± 0.5mm) 0.20" ± 0.004" (5.1 ± 0.1mm) 0.827" ± 0.02" (21.0 ± 0.5mm) 0.217" ± 0.004" (5.5 ± 0.1mm) 5SFP SEE LEAD SIZE LISTED IN “ MATERIAL” Specifications subject to change without notice 5SFD0801 ORDERING INFORMATION SEE PAGES 67 & 68 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel: 201-432-0463 • Fax: 201-432-9542 • E-Mail: belfuse@belfuse.com Website: www.belfuse.com 35 5 x 20mm Glass Tube Type 5SF / 5SFP Quick-acting Fuse Series (Low Breaking Capacity) 5SFC0801 -80mA -100mA -125mA -160mA -200mA -250mA -315mA -400mA -500mA -630mA -800mA -1A -1.25A -1.6A -2A -2.5A -3.15A -4A -5A -6.3A -8A -10A 5SF / 5SFP - TIME CURRENT CHARACTERISTIC CURVE 10000 1000 TIME IN SECONDS 100 10 0.1 0.01 0.01 0.1 1 10 100 1000 CURRENT IN AMPERES Specifications subject to change without notice 1 NOTE - see important information under “User Guide”on P.08 Corporate Office Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 Tel: 201-432-0463 Fax: 201-432-9542 E-Mail: belfuse@belfuse.com Website: www.belfuse.com Far East Office Bel Fuse Ltd. 8F/8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel: 852-2328-5515 Fax: 852-2352-3706 European Office Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Preston PR1 8UD Lancashire, U.K Tel: 44-1772-556601 Fax: 44-1772-888366 36