A446-0005-50

defining a degree of excellence 10 TAP 14 PIN DIP PASSIVE DELAY MODULES .60 + .01 .375 .350 .60 + .01 .285 Max In 1 .10 Typ .80 Max .22 Max .018 Coplanarity + .002 Gnd 14 .015 .004 13 12 11 10 9 2356 7 Out 8 Gnd .325 Cat 20 -R4 bel (DC) (P/N) bel (DC) (P/N) .285 Max .10 Typ .80 Max 4o .012 .008 .012 .008 .030 .23 Max 100o 90o .20 Max .015 Min .045 .12 Min .018 Part Numbers SMD S469-0005-XX S469-0010-XX S469-0020-XX S469-0030-XX S469-0040-XX S469-0050-XX S469-0060-XX S469-0070-XX S469-0080-XX S469-0090-XX S469-0100-XX S469-0150-XX S469-0200-XX S469-0250-XX S469-0300-XX S469-0400-XX S469-0500-XX Tap - Tap Rise Time Delay 5 + 0.3 ns 0.5 + 0.3 ns 3.0 ns A446-0005-XX 3.8 ns 10 + 0.5 ns 1.0 + 0.4 ns A446-0010-XX 5.0 ns 20 + 1.0 ns 2.0 + 1.0 ns A446-0020-XX 7.0 ns 30 + 1.5 ns 3.0 + 1.0 ns A446-0030-XX 8.5 ns 40 + 2.0 ns 4.0 + 1.0 ns A446-0040-XX 10.0 ns 50 + 2.5 ns 5.0 + 2.0 ns A446-0050-XX 60 + 3.0 ns 6.0 + 2.0 ns 12.0 ns A446-0060-XX 70 + 3.5 ns 7.0 + 2.0 ns 14.0 ns A446-0070-XX 80 + 4.0 ns 8.0 + 2.0 ns 16.0 ns A446-0080-XX 90 + 4.5 ns 9.0 + 2.0 ns 18.0 ns A446-0090-XX 100 + 5.0 ns 10.0 + 3.0 ns 20.0 ns A446-0100-XX 150 + 7.5 ns 15.0 + 3.0 ns 30.0 ns A446-0150-XX 200 + 10.0 ns 20.0 + 3.0 ns 40.0 ns A446-0200-XX 250 + 12.5 ns 25.0 + 3.0 ns 50.0 ns A446-0250-XX 300 + 15.0 ns 30.0 + 3.0 ns 60.0 ns A446-0300-XX 400 + 20.0 ns 40.0 + 3.0 ns 80.0 ns A446-0400-XX 500 + 25.0 ns 50.0 + 3.0 ns 100.0 ns A446-0500-XX Impedance in Ohms + 10%, XX = 50; 50 Ohms, XX = 01 ; 100 Ohms, XX = 02; 200 Ohms Thru-Hole Total Delay Attenuation Maximum 5% 5% 5% 5% 5% 5% 8% 8% 8% 8% 10% 10% 10% 10% 10% 10% 10% Recommended Temperature Profile 300o C 200o C 100o C Temp. Test Conditions @ 25oC Ein Trin PW P P Pulse Voltage Rise Time Pulse Width Pulse Period 1 Volt Typical 2.0 ns (10%-90%) 3 x Total Delay 4 x Pulse Width Infra Red 225o C Max Temp. > 185o C for 90 Seconds Max Electrical Characteristics 8 Delay Measurement Rise Time Measurement Distortion Insulation Resistance @ 50 Vdc Dielectric Withstanding Voltage Operating Temperature Range Temperature Coefficient of Delay Minimum Input Pulse Width Maximum Duty Cycle 50% Levels 10%-90% Levels + 10% 10K Megohms Min. 50 Vdc -55oC to +125oC 100 PPM/oC Max. 3 x Trout or 5 ns W.I.G. 60% 0 2 4 6 Time in Minutes Notes Transfer molded for better reliability Compatible with ECL & TTL circuits Terminals: Electro-Tin plate phosphor bronze Performance warranty is limited to specified parameters listed Tape & Reel available 32mm Wide x 16mm Pitch, 500 pieces per 13" reel Corporate Office Bel Fuse Inc. 198 Van Vorst Street, Jersey City, NJ 07302-4496 Tel: 201-432-0463 Fax: 201-432-9542 E-Mail: Belfuse@compuserve.com Internet: http://www.belfuse.com Other Delays and Impedances Available Consult Sales Specifications subject to change without notice. Far East Office Bel Fuse Ltd. 8F/8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel: 852-2328-5515 Fax: 852-2352-3706 European Office Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Preston PR1 8UD Lancashire, U.K. Tel: 44-1772-556601 Fax: 44-1772-888366 35