ABC201-1T15G

WLT200 The ABC201 Series of open-frame power supplies, with its wide universal 90-264 VAC input range and high power density, is available at 200 W of output power and a variety of single output voltages. The high efficiency and high power density of the ABC family ensures minimal power loss in end-use equipment, thereby facilitating higher reliability, easier thermal management and meets regulatory approvals for environmentally-friendly end products. These power supplies are ideal for telecom, datacom, industrial equipment and other applications. • 5 x 3 x 1.5 Inch Form Factor • 200 W with Forced Air Cooling • High Efficiency > 88% • 12 V Fan Output • 5 V Standby Output • Remote Sense • Output Voltage Adjustability • IEC Protection Class Options: − Class I: Earthing Tab J4 (no suffix) − Class II: No Earthing Tab (-2 suffix) • IEC / EN / UL 62368-1 Compliant • Metal Cover Kit Available (optional accessory) • Instrumentation • Renewable Energy • Lighting • Test and Measurement • Industrial Applications • Robotics ABC201 Series 2 • MODEL 1 CONNECTOR ABC201-1005G JST (Header) ABC201-1T05G Screw Terminal ABC201-1012G JST (Header) ABC201-1T12G Screw Terminal ABC201-1015G JST (Header) ABC201-1T15G Screw Terminal ABC201-1024G JST (Header) ABC201-1T24G Screw Terminal ABC201-1030G JST (Header) ABC201-1T30G Screw Terminal ABC201-1048G JST (Header) ABC201-1T48G Screw Terminal COVER-201-XBC 3 1 2 3 • Applied Computing MAX LOAD Wireless Communication 2 OUTPUT VOLTAGE CONVECTION 5 VDC 16.67 A 12 VDC 13.33 A 16.67 A 0.0 A 200 W 15 VDC 10.67 A 13.33 A 0.0 A 200 W 24 VDC 6.67 A 8.33 A 0.0 A 200 W 30 VDC 5.33 A 6.67 A 0.0 A 200 W 48 VDC 3.33 A 4.17 A 0.0 A 200 W MIN LOAD 300 LFM 26.0 A 0.0 A POWER 130 W 175 W 35.0 A Metal Cover Kit (accessory) Class I products have an Earthing tab. For Class II version (without Earthing tab) add suffix -2 (e.g.: ABC201-1012G-2). Combined output power from V1, VSTBY and VFAN should not exceed the total output power rating. When used in Cover Kit, de-rate output power to 70 % under all operating conditions. Specifications are for nominal input voltage, 25°C unless otherwise stated. PARAMETER DESCRIPTION / CONDITION SPECIFICATION Input Voltage Universal 90 – 264 VAC / 120 – 390 VDC Input Frequency Input Current Inrush Current Leakage Current 47 – 63 Hz 120 VAC: 230 VAC: 120 VAC: 230 VAC: 120 VAC: 230 VAC: No Load Power Switching Frequency 2.4 A max. 1.2 A max. 35 A max. 65 A max. < 150 µA < 300 µA 0.8 W PFC converter (variable) Resonant converter (variable) 35 to 250 kHz, 90 kHz typical 35 to 250 kHz, 90 kHz typical tech.support@psbel.com ABC201 Series 3 PARAMETER DESCRIPTION / CONDITION SPECIFICATION Output Voltage Refer to Model Selection table 5 V to 48 V Output Power 4 Peak Power: 250 W for 2 s 160 to 200 W Fan Output 5 @5A 120 VAC: 230 VAC: 120 VAC / 230 VAC: 120 VAC: 230 VAC: 12 V 84% typical 86% typical 10 ms 0.99 0.95 ± 0.5% Efficiency Hold Up Time Power Factor Line Regulation Load Regulation Transient Response Ripple 6 50 to 100% load change, 50 Hz, 50% duty cycle, 0.1A / µs All outputs Rise Time ± 2.0% < 10%, recovery time < 5 ms 1.0 % max < 100 ms Set Point Accuracy Main output ± 1% Output Voltage Adjustment V1 ±3% Over Current Protection 110% typical above rating Over Voltage Protection V1 Short Circuit Protection Short term, Automatic recovery Cooling 4 5 6 110 to 150% Convection 83 W (5 V model), 160 W (other models) 300 LFM 175 W (5 V model), 200 W (other models) Derate output power linearly to 80% from 90 VAC to 80 VAC input. Fan output voltage tolerance is +/-20%. During V1 full load, VFAN needs min. 20 mA load to be within regulation band. Peak current for fan output is 1 A. Ripple is 2% up to 20% load and < 1% above 20% load. Ripple is peak to peak with 20 MHz bandwidth and 10 µF (Electrolytic capacitor) in parallel with a 0.1 µF capacitor at rated line voltage and load ranges. Conducted Emissions EN 55032-B, CISPR22-B, FCC PART15-B Pass Radiated Emissions EN 55032 B Pass Input Current Harmonics EN 61000-3-2 Class D Voltage Fluctuation and Flicker EN 61000-3-3 Pass ESD Immunity EN 61000-4-2 Level 3, Criterion A Radiated Field Immunity EN 61000-4-3 Level 3, Criterion A Electrical Fast Transient Immunity EN 61000-4-4 Level 3, Criterion A Surge Immunity EN 61000-4-5 Level 3, Criterion A Conducted Immunity EN 61000-4-6 Level 3, Criterion A Magnetic Field Immunity EN 61000-4-8 Level 3, Criterion A Voltage Dips, Interruptions EN 61000-4-11 Criterion A & B Asia-Pacific +86 755 298 85888 Europe, Middle East +353 61 49 8941 North America +1 866 513 2839 © 2022 Bel Power Solutions & Protection BCD.00284_AG ABC201 Series 4 PARAMETER DESCRIPTION / CONDITION SPECIFICATION Isolation Voltage Input to Output: Min. 4000 VDC Safety Standards EN / IEC / UL 62368-1 (Ed.3) Agency Approvals Nemko, UL CE mark Complies with LVD Directive PARAMETER Operating Temperature 7 DESCRIPTION / CONDITION SPECIFICATION -20 to 0°C start-up is guaranteed -20 to 70°C Storage Temperature -40 to 85° C Humidity Non Condensing 95% Altitude Operating: Non-Operating: 10,000 ft. 40,000 ft. Reliability MTBF according to Telcordia –SR332-Issue 3 1.6 million hours 7 Refer to derating curves Convection load: 83 W up to 40 °C De-rate above 40 °C @ 1.89% per °C Forced air cooled load: 130 W up to 50°C (for screw terminal version) De-rate above 50 °C @ 1.63% per °C Forced air cooled load: 175 W up to 50°C (for JST connector version) De-rate above 50 °C @ 2.5% per °C Convection load: 160 W up to 40 °C De-rate above 40 °C @ 2% per °C Forced air cooled load: 200 W up to 50°C De-rate above 50 °C @ 2.5% per °C Figure 1. Derating Curves tech.support@psbel.com ABC201 Series 5 PARAMETER DESCRIPTION / CONDITION Power Good Signal TTL signal goes high after main output is in regulation band. Delay is 0.1 to 0.3 sec. Power Fail Signal TTL signal goes low 1 ms advance before output goes out of regulation due to mains failure Remote Sense Compensates for 200 mV cable drop Remote ON / OFF To turn on PSU short remote pin to ground CONNECTOR PIN DESCRIPTION / CONDITION Pin 1 AC Neutral Pin 2 AC Line MANUFACTURER / PN Molex: 26-60-4030 or equivalent; Mating: 09-50-3031; Pins: 08-50-0106 Option 1: Tyco: 2-1776112-3 or equivalent Mating: 13 AWG wire Option 2: JST: B6P-VH-B (LF) (SN) or B6P-VH (LF) (SN) or equivalent Mating: VHR-6M; Pins: SVH-41T-P1.1 AC Input Connector J1 DC Output Connector J2 Pin 1,2,3 Pin 4,5,6 RTN Vout Signals & Aux Power 8 J3 Pin 1 Pin 2 Pin 3 Pin 4 Pin 5 Pin 6 Pin 7 Pin 8 +VE Remote Sense VFAN (+12 V/0.5 A) -VE Remote Sense Remote ON/OFF VSTBY (+5 V/1 A, +/-5%) RTN (Signal) Power Fail Power Good Earth 8 (Spade Connector) J4 8 9 Molex: 22-23-2081 or equivalent Mating: 22-01-2087, Pins: 08-50-0113 Molex: 19705-4301 or equivalent Mating: 190030001 PSU is supplied with J3 housing, pin-4 and pin-6 shorted to enable main output without remote on/off feature Class I product only PARAMETER DESCRIPTION / CONDITION Weight 325 g (0.72 lbs.) Dimensions 127.0 x 76.2 x 38.1 mm (5 x 3 x 1.5 in) Asia-Pacific +86 755 298 85888 Europe, Middle East +353 61 49 8941 North America +1 866 513 2839 © 2022 Bel Power Solutions & Protection BCD.00284_AG ABC201 Series 6 Figure 2. Mechanical Drawing 1 2 3 NOTES: In case the PCB is mounted in a metal enclosure, using metal hardware ensure the following: Stand off, used to mount PCB has OD of 5.4 mm max. Screws, used to fix PCB on stand off, have head dia of 6.0 mm max. Washer, if used, to have dia of 6.5 mm max. tech.support@psbel.com ABC201 Series 7 Figure 3. Mechanical Drawing with Cover Kit NUCLEAR AND MEDICAL APPLICATIONS - Products are not designed or intended for use as critical components in life support systems, equipment used in hazardous environments, or nuclear control systems. TECHNICAL REVISIONS - The appearance of products, including safety agency certifications pictured on labels, may change depending on the date manufactured. Specifications are subject to change without notice. Asia-Pacific +86 755 298 85888 Europe, Middle East +353 61 49 8941 North America +1 866 513 2839 © 2022 Bel Power Solutions & Protection BCD.00284_AG