ABC350-1024L

WLP350 The ABC350 Series of open frame power supplies feature a wide universal AC input range of 90 – 264 VAC, offering 350 W of output power in a compact 3 x 5 x 1 inch footprint, with a variety of isolated single output voltages. The high efficiency and high power density of the ABC family ensures minimal power loss in end-use equipment, thereby facilitating higher reliability, easier thermal management and meets regulatory approvals for environmentally-friendly end products. These power supplies are ideal for telecom, datacom, industrial equipment and other applications. • 3 x 5 x 1 Inch Form Factor • 350 W with Forced Air Cooling & 200 W with Convection Cooling • Efficiencies up to 94% • No Load Power < 0.5 W • -40 to 70°C Operating Temperature • 12 V / 0.5 A Fan Output, Thermal Shut-Down Feature • 2.56 Million Hours, Telcordia -SR332-Issue 3 MTBF • IEC/EN/UL 62368-1:2018 (Ed 3.0) Certified • IEC/EN 61558 Compliant (Suitable for Household and Similar electrical equipment certified under IEC/EN 60335-1 standards) • CCC (China Compulsory Certification approval) • Approved with metal enclosures/accessories • RoHS Compliant ▪ Instrumentation ▪ Renewable Energy ▪ Lighting ▪ Test and Measurement ▪ Industrial Applications ▪ Automation Control ▪ Applied Computing ▪ Wireless Communication ABC350 Series 2 1. MODEL NUMBER 1 DESCRIPTION VOLTAGE MAX. LOAD (CONVECTION) MAX. LOAD (375 LFM) POWER 2. Specifications are for nominal input voltage, 25°C unless otherwise stated. PARAMETER DESCRIPTION / CONDITION SPECIFICATION Input Voltage Universal (Derate from 100% at 100 VAC to 90% at 90 VAC) 90-264 VAC / 390 VDC Input Frequency 47 - 63 Hz Input Current 115 VAC: 230 VAC: 3.6 A max. 1.8 A max. No Load Power Typical >0.5 W Inrush Current 115 VAC: 230 VAC: 264 VAC: 25 A 45 A 75 A Leakage Current Typical 300 µA Power Factor Full Load > 0.95 Switching Frequency PFC: PWM: 70 - 130 KHz 50 - 80 KHz tech.support@psbel.com ABC350 Series 3 3. PARAMETER DESCRIPTION / CONDITION SPECIFICATION Output Voltage Output Power 12 to 58 V With 375 LFM: Convection: 4 350 W 200 W Output Adjustment +/-3% Full Load: Convection Load: 48 V, 58 V: 24 V, 30 V: 12 V, 15 V: Hold-up Time Efficiency > 8 ms typical > 14 ms typical 94% 93% 92% Line Regulation 6 Load Regulation +/-0.5% 6 +/-1% Minimum Load 0.0 A Transient Response 50-100% step load change, at 0.1A/µS slew rate, 50% duty cycle, 50 Hz = 5% , recovery time < 5 ms Ripple 5, 6 For all outputs 1.0 % max Rise Time Typical 55 ms Set Point Tolerance 6 +/-1% Over Current Protection Hiccup mode / Auto Recovery >110% Over Voltage Protection Hiccup mode / Auto Recovery 110 to 140% Short Circuit Protection Hiccup mode / Auto Recovery Cooling With 375 LFM forced air cooling at 100 to 264 VAC: With natural convection cooling at 100 to 264 VAC: 350 W 200 W 4. Conducted Emissions EN55032-B, CISPR22-B, FCC PART15-B Pass Radiated Emissions EN 55032 A; with external core (King core K5B RC 25x12x15-M in input cable) Pass Level B Input Current Harmonics EN 61000-3-2 Class D Voltage Fluctuation and Flicker EN 61000-3-3 Pass ESD Immunity EN 61000-4-2 Level 3, Criterion A Radiated Field Immunity EN 61000-4-3 Level 3, Criterion A Electrical Fast Transient Immunity EN 61000-4-4 Level 3, Criterion A Surge Immunity EN 61000-4-5 Level 4, Criterion A Conducted Immunity EN 61000-4-6 Level 3, Criterion A Magnetic Field Immunity EN 61000-4-8 Level 3, Criterion A Voltage Dips, Interruptions EN 61000-4-11 Criterion A & B Asia-Pacific +86 755 298 85888 Europe, Middle East +353 61 49 8941 North America +1 866 513 2839 © 2022 Bel Power Solutions & Protection BCD.00560_AH ABC350 Series 4 5. PARAMETER DESCRIPTION / CONDITION SPECIFICATION Input to Output: for ITE application 3000 VAC Input to GND: 1500 VAC IEC 62368-1:2018, IEC 61558-1:2005, IEC 61558-1:2005/AMD1:2009, IEC 61558-2-16:2009, IEC 61558-2-16:2009 /AMD1:2013, IEC 60950-1(ed.2); am1; am2, EN 61558-2-16:2009; A1, EN 61558-1:2005; A1, EN 60950-1:2006; A11; A1; A12; A2, UL 62368-1 and CAN/CSA C22.2 No. 62368-1:19 UL 60950-1 and CAN/CSA C22.2 No. 60950-1-07, GB4943.1-2011; GB9254-2008; GB17625.1-2012 Isolation Voltage Safety Standards Agency Approvals Nemko, UL, C-UL, CCC CE mark Complies with LVD Directive 6. PARAMETER Operating Temperature 7 DESCRIPTION / CONDITION SPECIFICATION -40 to 0°C startup guaranteed, with spec deviation 8 -40 to +70°C Storage Temperature -40 to 85° C Altitude Operating: Non-operating: 16,000 ft. 40,000 ft. Humidity Non-Condensing 5% to 95% Reliability MTBF according to Telcordia - SR332-Issue 3 2.56 million hours 7. CONNECTOR AC Input Connector DC Output Connector PIN DESCRIPTION / CONDITION MANUFACTURER / PN J1 Pin 1 Pin 2 Pin 3 AC Line Not Fitted AC Neutral Molex: 26-60-4030 Mating: 09-50-3031; Pins: 08-50-0106 Pin 1 Pin 2 V1 +VE V1 - VE Pin 1,2,3,4 Pin 5,6,7,8 Pin 1 Pin 2 V1 +VE V1 - VE FAN +VE FAN -VE J2 Screw Terminal (Option 1) Molex Connector (Option 2) Aux (Fan) Output J3 Earth J4 6-32 inches Screw Pan HD Mating: 16 AWG wire crimped to Ring Tongue Terminal AMP: 8-31886-1 Molex: 26-60-4080 Mating: 09-50-3081; Pins: 08-50-0106 AMP :640456-2 Mating: 640440-2 Molex: 19705-4301 Mating: 19003-0001 8. Weight 300 g Dimensions 76.2 x 127.0 x 25.4 mm (3 x 5 x 1 inch) tech.support@psbel.com ABC350 Series 5 Figure 1. Mechanical Drawing - Screw Terminal (Option 1) Figure 2. Mechanical Drawing - Molex Header (Option 2) NOTES: In case the PCB is mounted in a metal enclosure, using metal hardware ensure the following: 1 Stand off, used to mount PCB has OD of 5.4 mm max. 2 Screws, used to fix PCB on stand off, have head dia of 6.0 mm max. 3 Washer, if used, to have dia of 6.5 mm max. Asia-Pacific +86 755 298 85888 Europe, Middle East +353 61 49 8941 North America +1 866 513 2839 © 2022 Bel Power Solutions & Protection BCD.00560_AH 6 ABC350 Series 9. Convection load: 180 W up to 50 °C De-rate above 50 °C @ 2.5% per °C Forced air cooled load: 300 W up to 50°C De-rate above 50 °C @ 2.5% per °C Convection load: 180 W up to 50 °C De-rate above 50 °C @ 2.5% per °C Forced air cooled load: 325 W up to 50°C De-rate above 50 °C @ 2.5% per °C Convection load: 200 W up to 50 °C De-rate above 50 °C @ 2.5% per °C Forced air cooled load: 350 W up to 50°C De-rate above 50 °C @ 2.5% per °C tech.support@psbel.com ABC350 Series 7 Convection load: 126 W up to 50 °C De-rate above 50 °C @ 2.5% per °C Convection load: 140W up to 50 °C De-rate above 50 °C @ 2.5% per °C NUCLEAR AND MEDICAL APPLICATIONS - Products are not designed or intended for use as critical components in life support systems, equipment used in hazardous environments, or nuclear control systems. TECHNICAL REVISIONS - The appearance of products, including safety agency certifications pictured on labels, may change depending on the date manufactured. Specifications are subject to change without notice. Asia-Pacific +86 755 298 85888 Europe, Middle East +353 61 49 8941 North America +1 866 513 2839 © 2022 Bel Power Solutions & Protection BCD.00560_AH