ABC40-1015G

WLT40 The ABC40 Series of open-frame power supplies, with its wide universal 90 – 264 VAC input range and high power density, is available at 40 W of output power and a variety of single and multiple output voltages. The high efficiency and high power density of the ABC family ensures minimal power loss in end-use equipment, thereby facilitating higher reliability, easier thermal management and meets regulatory approvals for environmentally-friendly end products. These power supplies are ideal for telecom, datacom, industrial equipment and other applications. Key Features & Benefits • 4 x 2 x 1.2 Inch Form Factor • 40 W convection-cooled rating • Single to Triple Outputs • High Efficiency > 85% • Low conducted and radiated noise • No Load Power < 0.3 W • IEC / EN / UL 62368-1 compliant • IEC Protection Class Options: o Class I: Earth pin J4 (no suffix) o Class II: No Earth pin (-2 suffix) • RoHS Compliant • Cover Kit Accessory Available Applications • Lighting • Automation Controls • Industrial Processing • Robotics • Applied Computing • Wireless Communication • Instrumentation • Test and Measurement ABC40 Series 2 1. MODEL SELECTION MODEL 1 VOLTAGE RIPPLE 4 ABC40-1005G 5.1 V 8.0 A POWER 0.0 A 1% 40 W ABC40-1012G 12 V 3.5 A 0.0 A 1% 40 W ABC40-1015G 15 V 2.7 A 0.0 A 1% 40 W ABC40-1024G 24 V 1.7 A 0.0 A 1% 40 W ABC40-1048G 48 V 0.83 A 0.0 A 1% 40 W 6.0 A 2.0 A 0.5 A 6.0 A 1.0 A 0.5 A 6.0 A 1.5 A 0.5 A 6.0 A 3.0 A 0.5 A 0.5 A 0.1 A 0.0 A 0.5 A 0.1 A 0.0 A 0.5 A 0.1 A 0.0 A 1.0 A 0.1 A 0.0 A 1.5% 1% 1% 1.5% 1% 1% 1.5% 1% 1% 1.5% 1.5% 1% ABC40-3000G ABC40-3001G ABC40-3002G ABC40-3003G COVER-40-XBC 5 V1 = 5.2 V V2 = 12.5 V V3 = -12.8 V V1 = 5.2 V V2 = 24 V V3 = -12.8 V V1 = 5.2 V V2 = 15 V V3 = -15 V V1 = 3.3 V V2 = 5 V V3 = -12.8 V 2 MIN LOAD 3 40 W 40 W 40 W 40 W Metal cover kit accessory 1 Class II version available. Add suffix “-2” at the end of the Model Number 2 Maximum current per output channel. Do not exceed total output power rating. 3 Min Load specified to meet cross regulation. Ripple is peak to peak with 20 MHz bandwidth and 10 µF (Electrolytic capacitor) in parallel with a 0.1 µF capacitor at rated line voltage and load ranges. When used in Cover Kit, de-rate output power to 70 % under all operating conditions. 4 5 2. MAX LOAD INPUT SPECIFICATIONS Specifications are for nominal input voltage, 25°C unless otherwise stated. PARAMETER DESCRIPTION / CONDITION SPECIFICATION Input Voltage Universal 90 - 264 VAC Input Frequency 6 Input Current No Load Power Inrush Current Leakage Current Switching Frequency 6 47 to 400 Hz 0.85 A max. 0.45 A max. < 0.3 W < 0.5 W 30 A max. 60 A max. < 500 µA 10 ms 8 40 W Line Regulation ± 0.3% Load Regulation V1: V2 & V3: Transient Response 50% to 100% load change, 50/60 Hz, 50% duty cycle, 0.1 A/µs Rise Time ± 0.5% ± 5% < 10%, recovery time < 5 ms < 100 ms Set Point Tolerance V1: V2 & V3: ± 3% ± 5% Output Voltage Adjustment V1 ± 10% Over Current Protection Typical, above rating 130% Over Voltage Protection Typical, for V1 only 130% Short Circuit Protection Short term, autorecovery Cooling Convection 7 8 4. For ABC40-3003G efficiency is 75% typical Derate output power linearly to 80% from 90 VAC to 80 VAC input. ENVIRONMENTAL SPECIFICATIONS PARAMETER DESCRIPTION / CONDITION SPECIFICATION Operating Temperature Refer to derating curve, Fig. 1 -20 to 0°C start-up is guaranteed -20 to 70°C Storage Temperature -40 to +70°C Relative Humidity Non Condensing 95% Altitude Operating: Non-Operating: 10,000 ft. 40,000 ft. Reliability MTBF according to Telcordia -SR332-Issue 3 1.87 million hours Figure 1. Derating Curve De-rate linearly from 100% at 50°C to 75% at 70°C Asia-Pacific +86 755 298 85888 Europe, Middle East +353 61 49 8941 North America +1 866 513 2839 © 2022 Bel Power Solutions & Protection BCD.00281_G ABC40 Series 4 5. EMC SPECIFICATIONS PARAMETER DESCRIPTION / CONDITION SPECIFICATION Conducted Emissions EN 55032-B, CISPR22-B, FCC PART15-B Pass Radiated Emissions EN 55032 B Pass Input Current Harmonics EN 61000-3-2 Class A Voltage Fluctuation and Flicker EN 61000-3-3 Pass ESD Immunity EN 61000-4-2 Level 3, Criterion A Radiated Field Immunity EN 61000-4-3 Level 3, Criterion A Electrical Fast Transient Immunity EN 61000-4-4 Level 3, Criterion A Surge Immunity EN 61000-4-5 Level 3, Criterion A Conducted Immunity EN 61000-4-6 Level 3, Criterion A Magnetic Field Immunity EN 61000-4-8 Level 3, Criterion A Voltage Dips, Interruptions EN 61000-4-11 Criterion A & B 6. SAFETY SPECIFICATIONS PARAMETER DESCRIPTION / CONDITION SPECIFICATION Isolation Voltage Input to Output 4000 VAC / VDC Safety Standards IEC60950-1(ed.2), EN 60950-1, UL60950-1 (2nd Edition), CSA C22.2 No. 60950-1 (2nd Edition), UL 62368-1, 2nd Ed, 2014-12-01 CAN/CSA C22.2 No. 62368-1-14, (2nd Edition), Class1 SELV IEC 62368-1:2014, EN 62368-1:2014 ;A11 Agency Approvals Nemko, UL, C-UL CE mark Complies with LVD Directive 7. CONNECTOR & PIN DESCRIPTION CONNECTOR PIN AC Input Connector J1 DC Output Connector J2 Signal Connector J3 Earth (Spade Connector) J4 8. DESCRIPTION / CONDITION Pin 1 Pin 2 Pin 1,2 Pin 3,4 Pin 5 Pin 6 Pin 1 Pin 2 AC Line AC Neutral V1 RTN V3 V2 +V1 Sense -V1 Sense MANUFACTURER / PN Molex: 26-60-4030 or equivalent Mating: 09-50-3031; Pins: 08-50-0106 Tyco: 640445-6 or equivalent Mating: 647402-6; Pins: 3-647409-1 Molex: 22-23-2021 or equivalent Mating: 22-01-2021 Molex: 19705-4301 Mating: 190030001 MECHANICAL SPECIFICATIONS PARAMETER DESCRIPTION / CONDITION Weight 150 g (0.33 lbs.) Dimensions 101.6 x 50.8 x 30.48 mm (4 x 2 x 1.2 inch) tech.support@psbel.com ABC40 Series 5 Figure 2. Mechanical Drawing ABC40-1xxxG Figure 3. Mechanical Drawing ABC40-3xxxG Asia-Pacific +86 755 298 85888 Europe, Middle East +353 61 49 8941 North America +1 866 513 2839 © 2022 Bel Power Solutions & Protection BCD.00281_G ABC40 Series 6 Figure 4. Mechanical Drawing with Cover Kit NOTES: In case the PCB is mounted in a metal enclosure, using metal hardware ensure the following: 1 Stand off, used to mount PCB has OD of 5.4 mm max. 2 Screws, used to fix PCB on stand off, have head dia of 6.0 mm max. 3 Washer, if used, to have dia of 6.5 mm max. For more information on these products consult: tech.support@psbel.com NUCLEAR AND MEDICAL APPLICATIONS - Products are not designed or intended for use as critical components in life support systems, equipment used in hazardous environments, or nuclear control systems. TECHNICAL REVISIONS - The appearance of products, including safety agency certifications pictured on labels, may change depending on the date manufactured. Specifications are subject to change without notice. tech.support@psbel.com