ABC60-3002G

WLT60 The ABC60 Series of AC-DC open-frame power supplies, with its wide universal 90-264 VAC input range and high power density, is available at 60 W of output power and a variety of single and multiple output voltages. The high efficiency and high power density of the ABC family ensures minimal power loss in end-use equipment, thereby facilitating higher reliability, easier thermal management and meets regulatory approvals for environmentally-friendly end products. These power supplies are ideal for telecom, datacom, industrial equipment and other applications. • 4 x 2 x 1.2 Inch Form Factor (101.6 x 50.8 x 30.48 mm) • 50 - 65 W Convection Cooled • Single to Triple Outputs • High Efficiency > 85% • No Load Power < 0.3 W • IEC Protection Class Options: o Class I: Earth pin J4 (no suffix) o Class II: No Earth pin (-2 suffix) • Conducted EMI EN 55022-B, FCC Part 15 Level B • IEC / EN / UL 62368-1 Compliant • RoHS Compliant • Cover Kit Accessory Available • Instrumentation • Renewable Energy • Lighting • Test and Measurement • Industrial Applications • Robotics • Applied Computing • Wireless Communication ABC60 Series 2 MODEL 1 VOLTAGE RIPPLE 4 ABC60-1005G 5.0 V 10.0 A POWER 0.0 A 1.5% 50 W ABC60-1012G 12 V 5.42 A 0.0 A 1% 65 W ABC60-1015G 15 V 4.33 A 0.0 A 1% 65 W ABC60-1024G 24 V 2.71 A 0.0 A 1% 65 W ABC60-1048G 48 V 1.35 A 0.0 A 1% 65 W V1 = 5.2 V 8.0 A 0.5 A 1.5% V2 = 12.5 V 3.0 A 0.1 A 1% V3 = -12.8 V 0.5 A 0.0 A 1% V1 = 5.2 V 8.0 A 0.5 A 1.5% V2 = 24 V 1.5 A 0.1 A 1% V3 = -12.8 V 0.5 A 0.0 A 1% V1 = 5.2 V 8.0 A 0.5 A 1.5% V2 = 15 V 2.5 A 0.1 A 1% V3 = -15 V 0.5 A 0.0 A 1% V1 = 3.3 V 6.0 A 1.0 A 1.5% V2 = 5 V 3.0 A 0.1 A 1% V3 = -12.8 V 0.5 A 0.0 A 1% ABC60-3000G ABC60-3001G ABC60-3002G ABC60-3003G COVER-60-XBC 5 1 2 3 4 5 MAX LOAD 2 MIN LOAD 3 60 W 60 W 60 W 45 W Metal cover kit accessory Class II version available. Add suffix “-2” at the end of the Model Number Maximum current per output channel. Do not exceed total output power rating. Min Load specified to meet cross regulation. Ripple is peak to peak with 20 MHz bandwidth and 10 µF (Electrolytic capacitor) in parallel with a 0.1 µF capacitor at rated line voltage and load ranges. When used in Cover Kit, de-rate output power to 70 % under all operating conditions. Specifications are for nominal input voltage, 25°C unless otherwise stated. PARAMETER DESCRIPTION / CONDITION SPECIFICATION Input Voltage Universal 90 - 264 VAC Input Frequency 6 Input Current No Load Power Inrush Current Leakage Current Switching Frequency 6 47 to 400 Hz 1.5 A max. 0.75 A max. < 0.3 W < 0.5 W 30 A max. 60 A max. < 500 µA 10 ms Output Power 8 50 - 65 W Line Regulation Output Voltage Adjustment V1: V2 & V3: V1 ± 0.3% ± 0.5% ± 5% < 10%, recovery time < 5 ms < 100 ms ± 3% ± 5% ± 10% Over Current Protection Typical above rating 130% Over Voltage Protection Typical for V1 only 130% Short Circuit Protection Short term, autorecovery Cooling Convection Load Regulation V1: V2 & V3: Transient Response 50% to 100% load change, 50/60 Hz, 50% duty cycle, 0.1 A/µs Rise Time Set Point Tolerance 7 8 For ABC60-3003G efficiency is 75% typical Derate output power linearly to 80% from 90 VAC to 80 VAC input. Single output models deliver 65 W, except for ABC60-1005G (50 W). Triple output models deliver 60 W, except for ABC60-3003G (45 W). PARAMETER DESCRIPTION / CONDITION SPECIFICATION Operating Temperature Refer to derating curve, Fig. 1 -20 to 0°C start-up is guaranteed -20 to 70°C Storage Temperature -40 to +85°C Relative Humidity Non Condensing 95% Altitude Operating: Non-Operating: 10,000 ft. 40,000 ft. Reliability MTBF according to Telcordia -SR332-Issue 3 1.87 million hours Cooling Convection Asia-Pacific +86 755 298 85888 Europe, Middle East +353 61 49 8941 North America +1 866 513 2839 © 2022 Bel Power Solutions & Protection BCD.00282_G ABC60 Series 4 Figure 1. Derating Curve De-rate linearly from 100% at 50°C to 50% at 70°C Figure 2. Derating Curve with Cover Kit Conducted Emissions EN 55032-B, CISPR22-B, FCC PART15-B Pass Radiated Emissions EN 55032 B Pass Input Current Harmonics EN 61000-3-2 Class A Voltage Fluctuation and Flicker EN 61000-3-3 Pass ESD Immunity EN 61000-4-2 Level 3, Criterion A Radiated Field Immunity EN 61000-4-3 Level 3, Criterion A Electrical Fast Transient Immunity EN 61000-4-4 Level 3, Criterion A Surge Immunity EN 61000-4-5 Level 3, Criterion A Conducted Immunity EN 61000-4-6 Level 3, Criterion A Magnetic Field Immunity EN 61000-4-8 Level 3, Criterion A Voltage Dips, Interruptions EN 61000-4-11 Criterion A & B tech.support@psbel.com ABC60 Series 5 PARAMETER DESCRIPTION / CONDITION SPECIFICATION Isolation Voltage Input to Output: 4000 VAC/VDC Safety Standards IEC 60950-1(ed.2), EN 60950-1, UL 60950-1 (2nd Edition), CSA C22.2 No. 60950-1 (2nd Edition), UL 62368-1, 2nd Ed, 2014-12-01 CAN/CSA C22.2 No. 62368-1-14, 2nd Ed, Class 1 SELV IEC 62368-1:2014, EN 62368-1:2014; A11 Agency Approvals Nemko, UL, C-UL CE mark Complies with LVD Directive CONNECTOR PIN AC Input Connector J1 DC Output Connector J2 Signal Connector J3 Earth (Spade Connector) J4 DESCRIPTION / CONDITION Pin 1 Pin 2 Pin 1,2 Pin 3,4 Pin 5 Pin 6 Pin 1 Pin 2 AC Line AC Neutral V1 RTN V3 V2 +V1 Sense -V1 Sense MANUFACTURER / PN Molex: 26-60-4030 or equivalent Mating: 09-50-3031; Pins: 08-50-0106 Tyco: 640445-6 or equivalent Mating: 647402-6; Pins: 3-647409-1 Molex: 22-23-2021 or equivalent Mating: 22-01-2021 Molex: 19705-4301 Mating: 190030001 PARAMETER DESCRIPTION / CONDITION Weight 150 g (0.33 lbs.) Dimensions 101.6 x 50.8 x 30.48 mm (4 x 2 x 1.2 inch) Asia-Pacific +86 755 298 85888 Europe, Middle East +353 61 49 8941 North America +1 866 513 2839 © 2022 Bel Power Solutions & Protection BCD.00282_G ABC60 Series 6 L N Figure 3. Mechanical Drawing ABC60-1xxxG 1 L N Figure 4. Mechanical Drawing ABC60-3xxxG tech.support@psbel.com ABC60 Series 7 Figure 5. Mechanical Drawing wit Cover Kit NOTES: In case the PCB is mounted in a metal enclosure, using metal hardware ensure the following: 1 Stand off, used to mount PCB has OD of 5.4 mm max. 2 Screws, used to fix PCB on stand off, have head dia of 6.0 mm max. 3 Washer, if used, to have dia of 6.5 mm max. NUCLEAR AND MEDICAL APPLICATIONS - Products are not designed or intended for use as critical components in life support systems, equipment used in hazardous environments, or nuclear control systems. TECHNICAL REVISIONS - The appearance of products, including safety agency certifications pictured on labels, may change depending on the date manufactured. Specifications are subject to change without notice. Asia-Pacific +86 755 298 85888 Europe, Middle East +353 61 49 8941 North America +1 866 513 2839 © 2022 Bel Power Solutions & Protection BCD.00282_G