ABC75-1024L

WLP75 The ABC75 Series of open frame power supplies feature a wide universal AC input range of 85 V – 264 VAC, offering 75 W of output power in a compact 3 x 2 x 1 inch footprint, with a variety of isolated single output voltages. The high efficiency and high power density of the ABC family ensures minimal power loss in end-use equipment, thereby facilitating higher reliability, easier thermal management and meets regulatory approvals for environmentally-friendly end products. ABC Series power supplies are ideal for telecom, datacom, industrial equipment and other applications. • 3 x 2 x 1 Inch Form Factor • 75 Watts with Convection Cooling • Efficiency up to 93% • -40 to 70°C Operating Temperature • Thermal Shut-Down Feature • 2 Million Hours, Telcordia -SR332-Issue 3 • IEC/EN/UL 62368-1 Certified • CCC (China Compulsory Certification approval) • No Load Power < 0.3 W • RoHS Compliant • CE Marked • Instrumentation • Renewable Energy • Lighting • Test and Measurement • Industrial Applications • Robotics • Applied Computing • Wireless Communication ABC75 Series 2 ABC75-1T12L ABC75-1012L Screw Terminal Molex Header 12 V 6.25 A 75 W ABC75-1T15L ABC75-1015L Screw Terminal Molex Header 15 V 5.00 A 75 W ABC75-1T24L ABC75-1024L Screw Terminal Molex Header 24 V 3.12 A 75 W ABC75-1T30L ABC75-1030L Screw Terminal Molex Header 30 V 2.50 A 75 W ABC75-1T48L ABC75-1048L Screw Terminal Molex Header 48 V 1.56 A 75 W ABC75-1T58L ABC75-1058L Screw Terminal Molex Header 58 V 1.29 A 75 W COVER-120-XBC 2 Metal cover kit accessory 1 2 For Class II version contact Bel sales representative. When used in Cover Kit, de-rate output power to 70 % under all operating conditions. Specifications are for nominal input voltage, 25°C unless otherwise stated. Universal (Derate from 75 W @ 100 VAC to 65 W @ 85 VAC) Input Voltage Input Frequency 85 – 264 VAC / 390 VDC 3 47 – 63 Hz Input Current 115 VAC: 230 VAC: 1 A max. 0.5 A max. No Load Power Typical < 0.3 W Inrush Current 115 VAC: 230 VAC: 264 VAC: 25 A 45 A 75 A Power Factor @ Full Load, Active PFC > 0.95 Switching Frequency Typical 60 kHz 3 Functional, not approved. tech.support@psbel.com ABC75 Series 3 Output Voltage Refer to Model selection table From 12 V to 58 V Output Power Convection cooling 75 W Efficiency 48 V, 58 V: 24 V, 30 V: 12 V, 15 V: 93% 91% 90% Hold-up Time Typical >16 ms Line Regulation +/-0.5% Load Regulation +/-1% Minimum Load 0.0 A Transient Response Ripple 4 25% step load change, at 0.1A/uS slew rate, 50% duty cycle, 50 Hz = 4% recovery time < 5 ms For all outputs 1.0 % max. Output Voltage Adjustment Rise Time +/-3% Typical 55 ms Set Point Tolerance +/-1% Over Current Protection > 110% Over Voltage Protection Latch type (AC recycling required) Short Circuit Protection Hiccup mode Cooling With natural convection cooling for input 100 – 264 VAC 4 110 to 140% 75 W Ripple is peak to peak with 20 MHz bandwidth and 10 μF (Electrolytic capacitor) in parallel with a 0.1 μF capacitor at rated line voltage and load ranges. Conducted Emissions Input Current Harmonics EN 55032-B, CISPR22-B, FCC PART15-B EN 55032 A; with external core (King core K5B RC 25x12x15-M in input cable) EN 61000-3-2 Pass Pass Level B Class D Voltage Fluctuation and Flicker EN 61000-3-3 Pass ESD Immunity EN 61000-4-2 Level 3, Criterion A Radiated Field Immunity EN 61000-4-3 Level 3, Criterion A Electrical Fast Transient Immunity EN 61000-4-4 Level 3, Criterion A Surge Immunity EN 61000-4-5 Level 3, Criterion A Conducted Immunity EN 61000-4-6 Level 3, Criterion A Magnetic Field Immunity EN 61000-4-8 Level 3, Criterion A Voltage Dips, Interruptions EN 61000-4-11 Criterion A & B Radiated Emissions Agency Approvals Input to Output: (for ITE application) 3000 VAC Input to GND: 1500 VAC IEC 62368-1:2018, EN 62368-1:2014; A11, UL 62368-1 and CAN/CSA C22.2 No. 62368-1:19, GB17625.1-2012; GB4943.1-2011; GB/T9254-2008 Nemko, UL, C-UL, CCC CE mark Complies with LVD Directive Isolation Voltage Safety Standard(s) Asia-Pacific +86 755 298 85888 Europe, Middle East +353 61 49 8941 North America +1 866 513 2839 © 2022 Bel Power Solutions & Protection BCD.00664_AF ABC75 Series 4 Operating Temperature -40 to 0°C startup guaranteed, with spec deviation 5 Storage Temperature -40 to +70°C -40 to +85°C Cooling With natural convection cooling at 100 to 264 VAC 75 W Relative Humidity Noncondensing 5% to 95% Altitude Operating: Nonoperating: 16,000 ft 40,000 ft. Reliability MTBF according to Telcordia -SR332-Issue 3 2.00 million hours 5 Output ripple can be more than 10% of the output voltage. Convection load: 75W up to 50°C De-rate above 50 °C @ 2.5% per °C Power de-rating with Cover Kit Convection load: 52.5W up to 50 °C De-rate above 50 °C @ 2.5% per °C Figure 1. Derating Curves tech.support@psbel.com ABC75 Series 5 Screw Terminal (Option 1) AC Input Connector J1 Pin 1 Pin 2 Pin 3 AC Line Not Fitted AC Neutral Molex Header (Option 2) Screw Terminal (Option 1) DC Output Connector J2 Pin 1, 2 Pin 3, 4 V1 -VE V1 +VE Molex Header (Option 2) Weight 180 g max Dimensions 76.2 x 50.8 x 25.4 mm (3 x 2 x 1 inch) Cooling 75 W with natural convection cooling at 100 to 264 VAC Molex: 39357-0003 Tyco-2-1776112-3 Molex: 1722861103 (Mating conn: Molex 1722561003, Molex 1722561103, Molex 1722563103) Molex: 39357-0004 Tyco-2-1776112-4 Molex: 1722861104 (Mating conn: Molex 1722561004, Molex 1722561104, Molex 1722563104) Figure 2. Mechanical Drawing - Screw Terminal (Option 1) Asia-Pacific +86 755 298 85888 Europe, Middle East +353 61 49 8941 North America +1 866 513 2839 © 2022 Bel Power Solutions & Protection BCD.00664_AF ABC75 Series 6 Figure 3 - Mechanical Drawing - Molex Header (Option 2) tech.support@psbel.com ABC75 Series 7 Figure 4 - Mechanical Drawing - With Cover Kit NOTES: In case the PCB is mounted in a metal enclosure, using metal hardware ensure the following: 1 Stand off, used to mount PCB has OD of 5.4 mm max. 2 Screws, used to fix PCB on stand off, have head dia of 6.0 mm max. 3 Washer, if used, to have dia of 6.5 mm max. NUCLEAR AND MEDICAL APPLICATIONS - Products are not designed or intended for use as critical components in life support systems, equipment used in hazardous environments, or nuclear control systems. TECHNICAL REVISIONS - The appearance of products, including safety agency certifications pictured on labels, may change depending on the date manufactured. Specifications are subject to change without notice. Asia-Pacific +86 755 298 85888 Europe, Middle East +353 61 49 8941 North America +1 866 513 2839 © 2022 Bel Power Solutions & Protection BCD.00664_AF