APC14112E

ISDN S Interface Hybrid APC14112e ELECTRICAL SPECIFICATIONS @ 25°C Choke Primary Inductance mH min 20 Leakage Inductance uH max 10 Primary DCR OHMS +/- 30% 1.95 Secondary DCR OHMS +/- 30% 2.75 Inductance per line mH nom 0.04 DCR per line OHMS 0.5 Turns Ratio +/-5% 1CT:2 NOTES: ISOLATION PRI:SEC 1500VRMS DESIGNED TO BE USED WITH INFINEON PEB2081, PEB2084, PEB2086, PSB2115, PSB2186, PEB8091 AND PEB8191. PROVIDES ISOLATION OF SELV AND TNV3 CIRCUITS IN ACCORDANCE WITH IEC 60950, EN 60950, UL 60950, ACA TS001 AND AS/NZS 60950 END SYSTEM COMPLIANCE TO IEC 60950, EN 60950, UL 60950, ACA TS001 AND AS/NZS 60950 IS THE RESPONSIBILITY OF THE INSTALLER S CHEMATIC 4 13 Rx 16 TNV 3 1 SELV 15 10 8 9 Tx 12 TNV 6 5 SELV MECHANICAL 25.6MAX 12.5 MAX 14.22 MAX 1 3.2 2.54 17.78 NOTES: NOT TO SCALE TOLERANCE +/- 0.2 MM ALL DIMENSIONS IN MM PIN DIAMETER 0.75 MM MAX DOT ON TOP OF SURFACE INDICATES PIN 1 ©2003 Bel Fuse Inc. Specifications subject to change without notice. 05.20.03 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com Page 1 10.16