FC100V5A-G

(888) IPD-CONVerters ● (888) 473-2668 ● www.ipdconverters.com FC SERIES - 5A, 10A, 20A, FILTER FEATURES DESCRIPTION FC100 industry standard input filter modules provide up • to 30 dB of common mode and differential mode filtering at 500 kHz. The FC100’s are available in 5A, 10A, and • 20A versions and are optimized for operation with PowerOne’s high density, board-mounted products. The filters can be operated with up to 100 VDC input and have • 1000 VDC isolation. • Meets Class B • Conducted Limits Optimized For • Power-One’s High Density, Board-Mounted • Products PCB Mountable • Common Mode and Differential Mode Filtering Industry Standard Pinout -40°C to 100°C Case Operation >30 dB Insertion Loss at 500 kHz 100 VDC Operation TECHNICAL SPECIFICATIONS Input Maximum Input Voltage Line-to-Case Operation Input Frequency 100 VDC 1000 VDC 100 Hz Output Maximum Average Current 400 LFM Airflow Natural Convection I out Max. 70% Iout General Isolation Input - Case Case Temperature Operating Range @ Iout Max. Operating Range @ 70% Iout Max. Storage Range Humidity Max., Non-Condensing Vibration, 3 Axes, 5 Min Each MTBF† (Bellcore TR-NWT-000332) Safety 1000 VDC -40 to +60°C -40 to +80°C -40 to +125°C 95% 5 g, 10 - 55 Hz Consult Factory Consult Factory Notes † MTBF predictions may vary slightly from model to model. Specifications typically at 25°C, normal line, and full load, unless otherwise stated. Soldering Conditions: I/O pins, 260°C, ten seconds; fully compatible with commercial wave-soldering equipment. Safety: Agency approvals may vary from model to model. Please consult factory for specific model information. Rev. 05/01 1 FC SERIES - 5A, 10A, 20A, FILTER MODELS - (See the last page of Section C for options.) Operating Current (Amps) Insertion Loss* Differential Mode (dB) Insertion Loss* Common Mode (dB) Typical Resistance** (mOhms) 5 10 20 28 31 26 30 28 32 27 17 6.6 Model FC100V5A FC100V10A FC100V20A * Typical loss at 500 kHz (50 Ohms) ** Resistance Per Leg MECHANICAL DRAWING FC100V5A FC100V20A -0.15" (-3.8mm) 0 1.00" (25.4mm) 0.780"(19.8mm) BOTTOM VIEW 0.390"(9.9mm) DIA 0.040" 1.00" 2 (1.0mm) (25.4mm) 0 1 0.200"(5.1mm) 2 0.400"(10.2mm) 0.600"(15.2mm) 0 5 3 1.700" (43.2mm) -0.15"(-3.8mm) 4 1 0.700" (17.8mm) 3 4 0.100"(2.5mm) 6 5 BOTTOM VIEW 7 0.300"(7.6mm) 8 0.500"(12.7mm) 1.65" 0.700"(17.8mm) (41.9mm) 9 -0.11"(-2.8mm) -0.11" 0 0.40" 0.780" (10.2mm) (19.8mm) (-2.8mm) 2.05" (52.1mm) FC100V10A -0.15" (-3.8mm) 0 0.475" (12.1mm) 1.700" (43.2mm) DIA 0.040" (1.0mm) -0.125"(-3.2mm) 0 1 3 1.00" (25.4mm) BOTTOM VIEW 0.750"(19.1mm) 0.18"(4.6mm) 4 2 DIA 0.040" (1.0mm) 2.00" (50.8mm) Pin Function 1 2 3 4 5 0.44" (11.2mm) Pin Pin Function +Vin Ground -Vin +Vout -Vout 1 2 3 4 5 Function 20A Module 10A Module 5A Module 0.46" (11.7mm) 0.020" (0.51mm) 5 1 2 3 4 5 6 7 8 9 +Vin -Vin Ground +Vout -Vout 2 -Vin -Vin +Vin +Vin Ground -Vout -Vout +Vout +Vout Tolerances Inches: .XX ± 0.020 .XXX ± 0.010 Pin: ± 0.002 (Millimeters) .X ± 0.5 .XX ± 0.25 ± 0.05 (Dimensions as listed unless otherwise specified.)