R558-5500-67

Product Guide Single Port ICMs 1xN Harmonica ICMs 2xN Stacked ICMs Specialty ICMs +1 858.676.9650 TechHelp@belf.com MagJack® Bel invented and is the largest supplier of Integrated Connector Modules (ICM), which combines the Ethernet filtering solution within the connector. With several acquisitions, Bel has the broadest portfolio of MagJack® ICM products available. Networking Equipment Applications • Storage • 10/100BT AutoMDIX • Switches • 1GBT (10/100/1000BT) • Routers • 2.5GBT, 5GBT and 10GBT • Servers • Power over Ethernet, 30W, 60W and 100W • Workstations • Extended Temperature Range of -40° to +85° C • Motherboards • RoHS Compliant, Soldering = 260° C for 10 Seconds ICMs combo devices provide a mix of RJ45 and USB connectors for greater design flexibility. Product Guide e om Mechanical Options Mechanical Options Single Port Designs • Plug Tab Up and Plug Tab Down • Plug tab up and plug tab down • With or •Without LEDs With or without LEDs and Bi-Color and bi-color • RJ45 and USB port combinations • Multi-Port Configurations: 2x1 / 2x4 / 2x6 / 2x8 • Vertical mount packaging • RJ45 and USB Port Combinations • Low profile versions under 0.50” height • MicroVersions height versionsUnder under 0.45” height Height • Low Profile 0.50” Optimized for 1U Advanced TCA rack applications, Compressor MagJack breaks the 1” height barrier • Mid-plane mount versions under 0.40” height • Micro Height Versions Under 0.45” Height with its two-tier, 0.785” (19.94mm) height package. Multi-Port Designs • Mid-Plane Mount Versions Under 0.40” Height • With or without LEDs and bi-color • Two-Tier Stacked Designs Under 0.785” • Multi-port configurations: 2x1 / 2x3Height / 2x4 / 2x6 / 2x8 • Two-tier stacked designs under 0.785” height • Vertical Mount Packaging ����������� ����������� ������ ������� ������ ������� ����������� ������ ������� ����������� ������ ��������� ��� MagJack’s mechanical evolution continues to provide more efficient space utilization with ultra-low profile packages and mid-plane mount versions. Bel ICMs Mechanical Evolution Continues to Provide More Efficient Space Utilization with Ultra-Low Profile Packages and Mid-Plane Mount Versions. Vertical-mount MagJack is optimized for space-critical Electrical Options • IR reflow compatible, 230° C for 90 seconds devices such as SBCs (single-board computers), motherboards, daughter cards, NICs (network • Surge protection for GR1089 intra-building and ESD interface cards), switches, • Extended temperature range -40° to +85° C hubs, and bridges. Applications include industrial PCs, printers, VoIP phones, remote sensor and transducer devices, security camera equipment, and wireless systems. Compressor ICMs breaks the 1” height barrier with its two-tier port configuration within a package height of only 0.785” (19.94mm). Bel Stewart Connector 11118 Susquehanna Trail South, Glen Rock, PA 17327 • Tel 717-235-7512 • Fax 717-235-4675 • www.belstewart.com Vertical-mount ICMs are optimized for space-critical devices such as SBCs (single-board computers), motherboards, daughter cards, NICs (network interface cards), switches, hubs, and bridges. Applications include industrial PCs, printers, VoIP phones, remote sensor and transducer devices, security camera equipment, and wireless systems. Low Profile, Mid-Plane Mounted, Single Port Magjack® ICM The MagJack® brand of low profile ICMs support 10/100Base-T, 1GBase-T and 10GBase-T Ethernet applications. This product type is aimed at customers who need very low profile height connectors or want to mount mezzanine cards above these connectors and are limited by height. As systems become smaller and implement faster speeds, the Ethernet connectors must adapt and become smaller and faster. This ICM product family combines small form factor with speed to provide ultimate combination of both allowing customers to put Ethernet ports where never possible before. Features & Benefits • Low profile height, less than .400” off the PCB • High speed capable, from 10/100BT up to 10GBT • Can be used in low profile applications • Can be used in half U height applications • Compatible with up to OCP 3.0 mechanical card requirements Applicaitons • Blade servers or cards • Network Interface cards • Laptop computers • Storage systems • Mezzanine cards Specifications • Meets all IEEE 802.3 10/100Base-T thru 10GBase-T electrical requirements including RL, IL, Hi-pot and Common Mode parameters • 100% hi-pot tested in production • Comes with many different LED color combinations and options • 50 micro-inches of gold plated contacts as required by the TIA 1096/FCC 47, Part 68. • Lead-free wave-solder compatible, with some IR reflow compatible designs • UL recognized • RoHS 6/6 compliant Bel Magnetic Solutions 12700 Stowe Drive Suite 200 Poway, CA 92064 USA +1 858.676.9650 techhelp@belf.com belfuse.com/magnetic-solutions © 2017 Bel Fuse Inc. br-mag-magJack-icm_12272017_6