S553-6500-D6

HIGH FREQUENCY MAGNETICS T1/E1 Octal Transformer Module • Optimized for Agere multi-channel 5-V devices: T7630, T7688, T7689, T7690, T7698, TLIU04C1 Eight transformers in one surface-mount package • • Optimized for DS1 applications. Provides very high return loss at receive interface per stringent Agere requirements. Meets return loss advertised by Agere (greater than required by ITU-T G.703) from -40° to +85° C UL 1950 approved: file number E150991 PWB Process Capability: standard printed wiring board assembly techniques, total-immersion cleaning Reliability testing: Shock, vibration, temperature cycling, temperature - humidity - bias Interwinding breakdown voltage: 1500 Vrms min • • • Operating temperature range -40° to +85°C Meets IEC 695, 2-2 flammability requirements TM01113 • • • • ELECTRICAL SPECIFICATIONS at 25° C Turns Ratio ±2% Part Number IC : Line TX S553-6500-D6 1 : 1.14 RX 1.14CT : 1 mH min TX 1.8 RX 1.8 µH max TX 0.5 RX 0.5 IC Side TX 0.6 RX 0.7 Line Side TX 0.7 RX 0.6 Winding to Winding 35 Primary Inductance at 10 kHz Leakage Inductance at 1 MHz DCR Ω max Capacitance pF max Return Loss at 102 kHz 100Ω Application1 25° C dB typ TX N/A RX 33 -40 to +85° C dB min TX N/A RX 20 1. Terminated in 129 Ω for RX SCHEMATIC S553-6500-D6 IC Side 1 1 TXI+ 1 TXI1 RXO+ 1 RXOCT 1 RXO2 TXI+ 2 TXI2 RXO+ 2 RXOCT 2 RXO3 TXI+ 3 TXI3 RXO+ 2 3 4 5 6 7 8 9 10 11 12 13 1 : 1.14 1 : 1.14 1 : 1.14 Line Side 40 1 TXO+ 39 1 TXO1.14CT : 1 38 1 RXI+ 37 36 1 RXI35 2 TXO+ 34 2 TXO33 2 RXI+ 32 31 3 RXI30 3 TXO+ 29 3 TXO28 3 RXI+ 27 1 : 1.14 26 3 RXI25 4 TXO+ 24 4 TXO1.14CT : 1 23 4 RXI+ 22 21 4 RXI©2001 Bel Fuse Inc. Specifications subject to change without notice. 09.01 1.14CT : 1 1.14CT : 1 3 RXOCT 14 3 RXO4 TXI+ 4 TXI4 RXO+ 15 16 17 18 4 RXOCT 19 4 RXO20 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 1 HIGH FREQUENCY MAGNETICS TM01113 T1/E1 Octal Transformer Module MECHANICAL S553-6500-D6 0.070 [1.78] ref 1.100 [27.94] max 0.050 [1.27] 0.480 [12.19] 0.645 [16.38] 0.070 [1.78] 0.050 [1.27] 0.020 ±0.002 [0.51 ±0.05] 0.030 [0.77] Suggested PCB Pad Layout ø0.015 [0.39] ø0.005 [0.13] 0.212 [5.38] ref 0.950 [24.13] 0.225 [5.72] max 0.035 [0.89] 0.600 [15.24] 0.005 [0.13] min 0˚- 5˚ 0.004 [0.10] Dimensions are in inches [millimeters]. Standard dimension tolerance is ±0.005 [0.13] unless otherwise noted. Tape and Reel Packaging 44 mm wide by 24 mm pitch; 13 inch OD, 6 inch ID 200 modules per reel, maximum Meets ANSI/EIA 481-2 Carrier Tape Standards - JEDEC SO Package ©2001 Bel Fuse Inc. Specifications subject to change without notice. 09.01 CORPORATE Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com FAR EAST Bel Fuse Ltd. 8F / 8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel 852-2328-5515 Fax 852-2352-3706 www.belfuse.com EUROPE Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Suite G7, Preston Lancashire, PR1 8UD, U.K. Tel 44-1772-556601 Fax 44-1772-888366 www.belfuse.com page 2