S558-5999-16

defining a degree of excellence HIGH SPEED LAN MAGNETICS 960027A • Designed for use with Microlinear ML6692/6694/6698 10/100 Mbps PHY transceivers • Low cost, space efficient surface mount packaging • 350µH OCL (inductance) with 8mA DC bias applied • 2000 Vrms isolation ELECTRICALS AT 25ºC Part No. Turns Ratio Insertion Loss (dB) Max 1MHz-100MHz Return Loss (dB) Min 1MHz-30MHz Return Loss (dB) Min 30MHz-80MHz Common to Diff Mode Rej (dB) Min 30MHz 100MHz Common to Common Mode Rej (dB) Min 30MHz 100MHz Schematic S558-5999-16 S558-5999-17 1:1:1 2CT:1 -1.0 -1.0 -18 -18 -12 -12 -50 -50 -40 -40 -40 -40 -30 -30 A B SCHEMATICS A Receive B Transmit MECHANICAL Specifications subject to change without notice. Bel Fuse Inc. 198 Van Vorst Street, Jersey City, NJ 07302 • Tel: 201-432-0463 • Fax: 201-432-9542 • E-Mail: BelFuse@belfuse.com Website: http://www.belfuse.com defining a degree of excellence HIGH SPEED LAN MAGNETICS 960027A APPLICATION CIRCUIT APPLICATION NOTES • These Bel part types have been designed for use in 10 Mbps or 10/100 Mbps data transmission systems over category 5 UTP/STP cable. The combination of these two parts, when used in the recommended application circuit, provides superior EMI noise suppression, high voltage isolation, wave shaping and fast, but controlled rise times. All parts meet IEEE 802.3 standards, which includes 350µH OCL (inductance) when 8mA of DC bias is applied. • The Bel part types have been tested and qualified for use with Microlinear ML6692/6694/6698 transceivers. • Bel's low profile, surface mount packaging is ideal for high speed pick and place machinery. Parts can be shipped on tape and reel for high speed placement. Construction processes have been implemented for thermal compatibility with high temperature IR reflow assembly processing. Post dipping of leads assist with PC board solderability. Each part is optically inspected to meet rigid coplanarity requirements. Corporate Office Bel Fuse Inc. 198 Van Vorst Street, Jersey City, NJ 07302-4496 Tel: 201-432-0463 Fax: 201-432-9542 E-Mail: BelFuse@belfuse.com Internet: http://www.belfuse.com Far East Office Bel Fuse Ltd. 8F/8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel: 852-2328-5515 Fax: 852-2352-3706 European Office Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Preston PR1 8UD Lancashire, U.K. Tel: 44-1772-556601 Fax: 44-1772-888366