S558-5999-L1

10/100BASE-T LAN MAGNETICS Low Profile PCMCIA Transformer Modules • Low profile, surface mount packaging rated to 225° C peak IR reflow temperature Four low profile package heights ranging from .098" (2.48mm) to .078" (1.98mm) • LM00411 Meets all IEEE 802.3 standards including 350 µH OCL with 8mA bias Operating temperature 0° to 70° C Minimum interwinding breakdown voltage of 1500 Vrms • • • ELECTRICAL SPECIFICATIONS AT 25° C Insertion Loss dB max 1MHz to 100MHz -2.0 Turns Ratio Part Number TX RX Return Loss dB min Crosstalk dB min Common to Differential Mode Rejection dB min 30MHz 60MHz 80MHz 1MHz to 100MHz -35 30MHz 50MHz 100MHz 150MHz S558-5999-32 1CT : 1CT 1CT : 1CT -17 -13 -12 -40 -40 -30 -20 S558-5999-59 1CT : 1CT 1CT : 1CT -1.0 -17 -13 -12 -35 -40 -40 -30 -20 S558-5999-69 1CT : 1CT 1CT : 1CT -1.2 -17 -13 -12 -35 -40 -40 -30 -20 S558-5999-A2 1.41CT : 1CT 1CT : 1CT -2.0 -17 -13 -12 -35 -40 -40 -30 -20 S558-5999-L1 1CT : 1CT 1CT : 1CT -2.0 -17 -13 -12 -35 -40 -40 -30 -20 S558-5999-L5 1CT : 1CT 1CT : 1CT -0.9 -18 -13 -12 -40 -40 -40 -30 -20 SCHEMATICS S558-5999-32 S558-5999-59 14 TX 13 12 1CT : 1CT 9 1 RX 1CT : 1CT 12 8 10 1CT : 1CT 2 3 4 5 TX 1CT : 1CT 11 10 9 8 1 RX 2 3 7 5 6 6 ©2000 Bel Fuse Inc. 7 Specifications subject to change without notice. 01.00 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com L4-33 10/100BASE-T LAN MAGNETICS LM00411 Low Profile PCMCIA Transformer Modules S558-5999-69 S558-5999-L5 1 2 RX 3 5 TX 6 7 9 8 1CT : 1CT 12 10 1CT : 1CT SCHEMATICS S558-5999-A2 1 14 1CT : 1CT 14 13 2 13 RX 3 5 TX 6 7 9 8 1.41CT : 1CT 12 10 Note: RX and TX channles are interchangable. S558-5999-L1 1 RX 2 3 6 7 TX 8 9 1CT : 1CT 15 14 11 10 1CT : 1CT 16 MECHANICALS S558-5999-32 S558-5999-69 0.670 0.570 [17.02] [14.48] 0.795 [20.19] 0.100 [2.54] 0.710 [18.03] 0.030 [0.76] 0.080 [2.03] 0.100 [2.54] 0.098 [2.49] max 0.018 ±0.002 [0.46 ±0.05] Suggested PCB Pad Layout 0˚- 8˚ 0.004 [0.10] 0.010 ±0.002 [0.25 ±0.05] 0.030 [0.76] min Dimensions are in inches [millimeters]. Standard dimension tolerance is ±0.005 [0.13] unless otherwise noted. ©2000 Bel Fuse Inc. Specifications subject to change without notice. 01.00 Between components and seating plane with 0.002 [0.05] min clearance The end of leads with 0.005 [0.13]min clearance Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com L4-34 10/100BASE-T LAN MAGNETICS Low Profile PCMCIA Transformer Modules MECHANICALS S558-5999-59 LM00411 0.595 [15.11] 0.100 [2.54] 0.670 0.570 [17.02] [14.48] 0.710 [18.03] 0.030 [0.76] 0.080 [2.03] 0.100 [2.54] 0.098 [2.49] max 0.018 ±0.002 [0.46 ±0.05] Suggested PCB Pad Layout 0˚- 8˚ 0.004 0.010 ±0.002 [0.25 ±0.05] 0.040 [1.02] min Dimensions are in inches [millimeters]. Standard dimension tolerance is ±0.005 [0.13] unless otherwise noted. The end of leads Between with 0.005 [0.13]min components clearance and seating plane with 0.002 [0.05] min clearance S558-5999-A2 0.795 ±0.010 [20.07] ±0.25 0.100 [2.54] 0.715 [18.16] 0.070 [1.78] 0.020 ±0.002 [0.51 ±0.05] 0.100 [2.54] typ 0.030 [0.76] Suggested PCB Pad Layout 0.670 0.560 [17.02] [14.22] 0.010 [0.52] 0.094 [2.39] max 0.600 [15.24] 0.055 [1.40] ref Between components to seating plane with 0.002 [0.05] minimum clearance 0.480 [12.19] ref 0.035 [0.89] 0˚- 5˚ 0.004 [0.10] Dimensions are inches [millimeters]. Standard dimension tolerance is ±0.005 [0.13] unless otherwise noted. ©2000 Bel Fuse Inc. Specifications subject to change without notice. 01.00 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com L4-35 10/100BASE-T LAN MAGNETICS LM00411 Low Profile PCMCIA Transformer Modules MECHANICALS 0.560 [14.22] 0.030 [0.76] S558-5999-L1 0.050 [1.27] 0.670 0.560 [17.02] [14.22] 0.715 [18.16] 0.030 [0.76] 0.020 +0.002 [0.51 +0.05] 0.078 [1.98] max 0.070 [1.77] 0.050 [1.27] Suggested PCB Pad Layout 0.068 [1.73] ref 0˚- 4˚ Between components to seating plane with 0.002 [0.05] minimum clearance 0.004 [0.10] 0.350 [8.89] 0.035 [0.89] Dimensions are inches [millimeters]. Standard dimension tolerance is ±0.005 [0.13] unless otherwise noted. S558-5999-L5 0.790 [20.07] 0.010 [0.52] 0.100 [2.54] 0.715 [18.16] 0.070 [1.78] 0.020 ±0.002 [0.51 ±0.05] 0.084 [2.13] max 0.100 [2.54] 0.068 [1.73] ref 0.030 [0.76] Suggested PCB Pad Layout 0.670 0.560 [17.02] [14.22] 0.600 [15.24] Between components to seating plane with 0.002 [0.05] minimum clearance 0.035 [0.89] 0˚- 5˚ 0.004 [0.10] Dimensions are inches [millimeters]. Standard dimension tolerance is ±0.005 [0.13] unless otherwise noted. ©2000 Bel Fuse Inc. Specifications subject to change without notice. 01.00 CORPORATE Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com FAR EAST Bel Fuse Ltd. 8F / 8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel 852-2328-5515 Fax 852-2352-3706 www.belfuse.com EUROPE Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Suite G7, Preston Lancashire, PR1 8UD, U.K. Tel 44-1772-556601 Fax 44-1772-888366 www.belfuse.com L4-36