S560-6100-A1-F

ADSL Magnetics TM02391 • Minimum interwinding breakdown voltage of 1000 Vdc • Operating and storage temperature range: -40° to +85° C • Meets IEC 695, 2-2 flammability requirements • PWB Process Capability: standard printed wiring board assembly techniques, total-immersion cleaning • Reliability testing: shock, vibration, temperature cycling, temperature - humidity - bias ELECTRICAL SPECIFICATIONS AT 25° C Turns Ratio ±2% Inductance1 mH ±7.5% Inductance1 mH min Leakage Inductance2 µH max (1-4) : (2-3) (1-4) at 90 mA DC (1-4) (1-4) (2-5) 1:1 2.6 2.4 5 17.5 17.5 Part Number S560-6100-A1 DCR Ω max 1. Inductance measured at 10 kHz, 0.1 Vac 2. Measured at 100 kHz, 0.1 Vac SCHEMATIC S560-6100-A1 1:1 1 2 4 3 ©2002 Bel Fuse Inc. Specifications subject to change without notice. 01.02 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 1 ADSL Magnetics TM02391 MECHANICAL Suggested PCB Pad Layout S560-6100-A1 0.260 [6.61] 0.310 [7.87] max 0.200 [5.08] 0.390 [9.91] max 0.040 [1.02] 0.095 [2.41] 0.440 [11.18] max 0.180 [4.57] 0.020 Sq. Pin Phosphor Bronze Solder Plated 0.335 [8.51] max 0.020 [0.51] 0.200 [5.08] Dimensions are in inches [millimeters]. Standard dimension tolerance is ±0.005 [0.13] unless otherwise noted. Tape and Reel Packaging 24 mm wide by 16 mm pitch; 13 inch OD, 4 inch ID 300 components per reel, maximum Meets ANSI/EIA 481-2 Carrier Tape Standards User Feed Direction Orientation of Component Inside Pocket ©2002 Bel Fuse Inc. Specifications subject to change without notice. 01.02 CORPORATE FAR EAST EUROPE Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com Bel Fuse Ltd. 8F / 8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel 852-2328-5515 Fax 852-2352-3706 www.belfuse.com Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Suite G7, Preston Lancashire, PR1 8UD, U.K. Tel 44-1772-556601 Fax 44-1772-888366 www.belfuse.com page 2