S560-6600-F3

ADSL Magnetics For Analog Devices AD20MSP930 • Designed to meet IEC 950 safety requirements for supplementary insulation at 250V Minimum interwinding breakdown voltage of 1500 Vrms • • Complies with all of the requirements in the transformer specification generated by Analog Devices • PWB Process Capability: standard printed wiring board assembly techniques, total-immersion cleaning Reliability testing: shock, vibration, temperature cycling, temperature - humidity - bias • • • Operating temperature range: -40° C to +85° C Meets IEC 695, 2-2 flammability requirements TM00305 ELECTRICAL SPECIFICATIONS AT 25° C Turns Ratio ±2% Part Number Application Package Chip : Line S560-6600-F3 0560-6600-E4 S560-6600-F4 0560-6600-E5 S560-6600-F5 0560-6600-E6 S560-6600-F6 0560-6600-E7 SMD 1:1 THT SMD 1 : 1.2 THT SMD 1 : 1.1 THT SMD 1 : 1.1 THT Chip Side Inductance Leakage Inductance µH max Chip Side DCR Ω max Chip Side Line Side Longitudinal Balance dB min 10 kHz 1.1 MHz Insertion Loss dB max 300 kHz Frequency Response dB 30 kHz 1.1 MHz Harmonic Distortion dB max ADSL over ISDN - CO 100 µH ±7%1 4 1 1 46 0.5 ± 0.5 -803 ADSL over ISDN - CPE ADSL over POTS - CO ADSL over POTS - CPE 120 µH ±10%1 2 mH ±10%2 1.2 mH ±10%2 4 0.61 0.74 46 0.5 ± 0.5 -803 8.5 1.7 1.8 46 0.5 ± 0.5 -804 10 1.25 1.4 46 0.5 ± 0.5 -804 All measurements are made with pins 2 and 3 connected and pins 8 and 9 connected 1. measured at 100 kHz, 1 Vac 2. measured at 20 kHz, 1 Vac 3. measured with 100 Ω source at 100 kHz, 4 Vac 4. measured with 100 Ω source at 20 kHz, 4 Vac SCHEMATIC S560-6600-F3 S560-6600-F4 S560-6600-F5 S560-6600-F6 0560-6600-E4 0560-6600-E5 0560-6600-E6 0560-6600-E7 1 10 3 CHIP SIDE 2 8 LINE SIDE 9 4 7 ©2000 Bel Fuse Inc. Specifications subject to change without notice. 06.00 Bel Fuse Inc. 198 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com T3-23 ADSL Magnetics TM00305 For Analog Devices AD20MSP930 MECHANICAL SUGGESTED PCB PAD LAYOUT 1 5 S560-6600-F3 S560-6600-F4 S560-6600-F5 S560-6600-F6 0.100 (2.54) 0.741 (18.82) 0.060 (1.52) 0.028 (0.71) 0.540 (13.72) MAX 0.585 (14.86) MAX 0.087 (2.21) 10 0.100 (2.54) 6 0.500 (12.70) MAX 0.005 (0.13) 10 EDGES 0.606 (15.39) 0.699 (17.75) MAX 1 5 0560-6600-E4 0560-6600-E5 0560-6600-E6 0560-6600-E7 10 0.550 (13.97) MAX 6 0.525 (13.34) MAX 0.500 (12.70) MAX 0.110±0.010 (2.79±0.25) 0.098 (2.50) 0.020 (0.508) SQ. TYP (PHOSPHER BRONZE, SOLDER COATED 0.394 (10.00) ©2000 Bel Fuse Inc. Specifications subject to change without notice. 06.00 CORPORATE Bel Fuse Inc. 198 Van Vorst Street Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com FAR EAST Bel Fuse Ltd. 8F / 8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel 852-2328-5515 Fax 852-2352-3706 www.belfuse.com EUROPE Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Suite G7, Preston Lancashire, PR1 8UD, U.K. Tel 44-1772-556601 Fax 44-1772-888366 www.belfuse.com T3-24