S560-6600-HG

G.SHDSL Magnetics TM02307 • Designed to comply with the requirements of UL1950 and EN60950 to provide an insulation barrier with a working voltage of 150V Minimum interwinding breakdown voltage of 1500 Vrms • • • Operating and storage temperature range: -40° to +85° C Meets IEC 695, 2-2 flammability requirements PWB Process Capability: standard printed wiring board assembly techniques, total-immersion cleaning Reliability testing: shock, vibration, temperature cycling, temperature - humidity - bias • • Minimum interwinding voltage of 600 Vrms between pins 1 and 2 for one minute for power cross requirement • ELECTRICAL SPECIFICATIONS AT 25° C Leakage Inductance2 µH max DCR Ω max Longitudinal Balance3 dB max 20 kHz 500 kHz -45 Insertion Loss dB max Harmonic Distortion3 dB max 2 Vrms 5 kHz -82 Turns Ratio ±2% Part Number Chip : Line Inductance1 mH ±7% Line Side Line Side Chip Side Line Side 100 kHz S560-6600-HG 1 : 0.70 3.18 15 24 7.9 1.5 All measurements are made with pins 2 and 3 connected and pins 5 and 7 connected 1. Inductance measured at 10 kHz, 0.1 Vac 2. Measured at 100 kHz, 0.1 Vac 3. Measured with line impedance of 135 Ω and chip impedance of 275.5 Ω SCHEMATIC S560-6600-HG 8 1 5 IC 7 3 Line 2 6 4 ©2002 Bel Fuse Inc. Specifications subject to change without notice. 10.02 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 1 G.SHDSL Magnetics TM02307 MECHANICAL 1 4 Suggested PCB Pad Layout S560-6600-HG 0.391 [9.93] 0.082 [2.08] 8 0.098 [2.50] 5 0.018 [0.46] 0.046 [1.17] 0.098 [2.50] 0.395 [10.00] max 0.500 [12.70] max 0.390 [9.91] max 0.286 [7.26] 0.380 [9.65] Dimensions are in inches [millimeters]. Standard dimension tolerance is ±0.005 [0.13] unless otherwise noted. Tape and Reel Packaging 24 mm wide by 20 mm pitch; 13 inch OD, 4 inch ID 200 components per reel, maximum Meets ANSI/EIA 481-2 Carrier Tape Standards User Feed Direction Orientation of Component Inside Pocket ©2002 Bel Fuse Inc. Specifications subject to change without notice. 10.02 CORPORATE Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com FAR EAST Bel Fuse Ltd. 8F / 8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel 852-2328-5515 Fax 852-2352-3706 www.belfuse.com EUROPE Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Suite G7, Preston Lancashire, PR1 8UD, U.K. Tel 44-1772-556601 Fax 44-1772-888366 www.belfuse.com page 2