SBLP65-1048G

SBLP65 AC-DC Single-Output Series Data Sheet 65 Watts Features  RoHS compliant for all six substances  Typical 80-85% efficiency  Quasi-resonant ZVS topology with synchronous         Applications      Telecom, datacom Networking Industrial Consumer Gaming  rectification Compact size of 2” x 4” x 1.30” 65 Watts with only 4-5 CFM forced-air cooling 60 Watts with convection cooling 90-264 VAC wide-range input FCC & CISPR 22, Class "B" – Conducted EMI Height meets 1U chassis constraints Two-year limited warranty Safety Agency pending to UL60960-1, CSA 22.2 No. 60950-1-03, and TUV EN60950/IEC 60950-1 Compliance with EN 61000-4-2 level 4 (ESD), EN 61000-4-3 (RF), EN 61000-4-4 level 3 (Fast Transient/Burst), EN 61000-4-5 class 3 (Surge) Description The SBLP65 is a compact and efficient series of AC-DC power supplies suited for telecom, datacom, and many other applications. The SBLP65 Series meets the international information technology safety standards with the CEMark for the European Low Voltage Directive (LVD). Its high efficiency allows a very minimal power loss in end equipment, resulting in higher reliability, ease of thermal management, and regulatory approvals for an environmentally friendly end product. Single-Output Model Selection Model Nominal Output Voltage (VDC) Min-Max Output Current (Amps), Convection Min-Max Output Current (Amps), 1 Forced Air Peak Output Current 2 (Amps) Total Regulation 3 (%) Ripple & Noise mV 4 pk-pk % SBLP65-1003G 3.3 0 - 11 0 - 11 19 2 1.5 SBLP65-1005G 5 0 - 11 0 - 11 12 2 1.0 SBLP65-1012G 12 0-5 0 - 5.4 6.25 2 1.0 SBLP65-1015G 15 0-4 0 - 4.3 5 2 1.0 SBLP65-1024G 24 0 - 2.5 0 - 2.7 3.1 2 1.0 SBLP65-1048G 48 0 - 1.25 0 - 1.35 1.56 2 1.0 1 4 CFM or 105 LFM (average measurement of six equally-distributed points through a 3.5" x 1.6" (9 cm x 4 cm cross-sectional area) with power supply mounted on a 0.25" (6.35 mm) standoffs. Recommended airflow direction is from the AC input to the DC output. 2 Peak current duration for less than 30 seconds with a maximum duty cycle of 10%. During peak loading, output may exceed total regulation limits. 3 At 25 C ambient including voltage set point tolerance, line and load regulation 4 Maximum peak-to-peak noise at 20 MHz bandwidth measured at the end of a twisted pair cable across a bypass capacitor. MCD10023 Rev. 1.7, 30-Mar-09 Page 1 of 6 www.power-one.com SBLP65 AC-DC Single-Output Series Data Sheet 65 Watts ELECTRICAL SPECIFICATIONS Input Specifications Parameter Conditions/Description Min. Nom. Max. Units 90 100 - 250 264 VAC AC Input Voltage Range Continuous voltage range DC Input Voltage Range For DC input applications, please consult factory. Frequency AC Input Power Factor Complies with EN61000-3-2 Standard for Line Current Harmonics with input power less than 75 Watts, at