SSQC750

SSQCD1005 ESSQD1005A1 Replaceable SSQ/SST with Integral Clips SSQ Square Ceramic Surface Mount Quick Action Fuse Catalog Number Ampere Rating RoHS Compliant SST Square Ceramic Surface Mount Slow Blow Fuse Catalog Number Ampere Rating SSQC 250 These fuse/clip assemblies can efficiently placed in a single pass. Once reflowed, fuse replacement requires no resoldering. 250mA 375mA 500mA 750mA 1A 1.25A 1.5A 2A 2.5A 3A 3.5A 4A 5A 6.3A 7A 8A SSTC 375 SSTC 500 SSTC 625 SSTC 750 SSTC 1 SSTC 1.5 SSTC 2 SSTC 2.5 SSTC 3 SSTC 3.5 SSTC 4 SSTC 5 SSTC 7 375mA 500mA 625mA 750mA 1A 1.5A 2A 2.5A 3A 3.5A 4A 5A 7A SSQC 375 SSQC 500 SSQC 750 SSQC 1 SSQC 1.25 SSQC 1.5 SSQC 2 SSQC 2.5 SSQC 3 SSQC 3.5 SSQC 4 SSQC 5 SSQC 6.3 SSQC 7 SSQC 8 RoHS Compliant Product Electrical Specification RoHS Reflow Reference: Industrial standard 260°C, 40 sec max Maximum Recommended Fuse Current Rating 8 Amperes, 125 Volts Environmental Specifications Operating Temperature -55°C to 125°C Shock MIL-STD-202, Method 213, Test Condition I (100 G’s peak for 6 milliseconds) Vibration MIL-STD-202, Method 201 (10-55 Hz, 0.06 inch, total excursion) Insulation Resistance MIL-STD-202, Method 302, Test Condition A (After Opening) 10,000 ohms minimum. Solderability MIL-STD-202, Method 208 Thermal Shock MIL-STD-202, Method107, Test Condition B (-65°C to +125°C) Consult manufacturer for other ratings Physical Specification Materials Clip Terminals: Tin Plated Inconel Alloy Packaging 2,000 fuses in 13 inches dia. reel, 16mm wide tape, 8mm pitch, per EIA standard 481 Mechanical Dimensions SSQC 9.15mm (0.360") 2.49mm (0.098") REF. 3.81mm (0.150") 3.33mm (0.131") 8.38 ± 0.5mm (0.330" ± 0.02") FUSE 2.92 ± 0.2mm (0.115" ± 0.08") 3.25 ± 0.10mm (0.128" ± 0.004") 7.49mm (0.295") REF. Recommended Pad Layout ORDERING INFORMATION SEE LAST 2 PAGES Bel Fuse Inc. 2 06 Van Vorst Street, Jersey City, NJ 07302 • Tel: 201-432-0463 • Fax: 201-432-9542 • E-Mail: belfuse@belfuse.com Website: www.belfuse.com 09 Specifications subject to change without notice 3.30mm (0.130") REF. SMD Comparison SMD1005 FUSE TYPE MECHANICAL DIMENSIONS 2.03 ± 0.10mm (0.080" ± 0.004") 3.05 ± 0.13mm (0.120" ± 0.005") 3.05 ± 0.13mm (0.120" ± 0.005") 9.65 ± 0.25mm (0.38" ± 0.01") PAD LAYOUT RECOMMENDED 5.08mm (0.20") 4.06mm (0.16") 3.81mm (0.15") SMP 1.35±0.10mm (0.053"±0.004") 2.54±0.10mm (0.100"±0.004") 2.54±0.10mm (0.100"±0.004") 3.00mm (0.12") 3.18mm (0.125") 2.00mm (0.08") SSQ / SST 6.10±0.25mm (0.240"±0.01") SSQ / SST WITH INTEGRAL CLIP 2.92 ± 0.2mm (0.115" ± 0.008" ) 7.49mm (0.295" )REF. FUSE 2.49mm REF. (0.098") 3.81mm (0.150") 3.33mm (0.131") 8.38 ± 0.5mm (0.330" ± 0.02")REF 3.25 ± 0.1mm (0.128" ± 0.004") 0.36±0.15mm (0.014"±0.006") 1.52±0.10mm (0.060"±0.004") 1.52mm (0.06") 1.78mm (0.07") 2.03mm (0.08") 1.14mm (0.045 ") 1.52mm (0.06") C1Q 3.07±0.13mm (0.121"±0.005") 1.52mm (0.06") INFRARED SOLDER 0.58±0.08mm (0.023"±0.003") WAVE SOLDER Specifications subject to change without notice 0.30±0.10mm (0.012"±0.004") 0.79±0.10mm (0.031"±0.004") 0.76mm (0.03") 1.02mm (0.04") 0.66mm (0.026") 1.27mm (0.05") 0.76mm (0.03") C2Q 1.60±0.13mm (0.063"±0.005") 0.76mm (0.03") INFRARED SOLDER 0.48±0.08mm (0.019"±0.003") WAVE SOLDER NOTE - see important information under “User Guide”on P.08 Corporate Office Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 Tel: 201-432-0463 Fax: 201-432-9542 E-Mail: belfuse@belfuse.com Website: www.belfuse.com Far East Office Bel Fuse Ltd. 8F/8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel: 852-2328-5515 Fax: 852-2352-3706 European Office Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Preston PR1 8UD Lancashire, U.K Tel: 44-1772-556601 Fax: 44-1772-888366 10