V7PB-10C12L

NON-ISOLATED DC/DC CONVERTERS 3.3V Input / 0.9V – 2.5V Output / 10A V7PB-10C Series • • • • • • • • • • • Nonisolated Industry standard footprint Fixed frequency High efficiency means less power dissipation Excellent thermal performance Optimized for cost Remote on/off Remote sense Undervoltage lockout (UVLO) Over current and short circuit protection Industrial temperature range POWER PRODUCTS BP03V7PB-10C Description The Bel V7PB-10C modules are a series of non-isolated, step down DC/DC power converters that operate from a nominal 3.3V source. These converters are available in a range of output voltages from 0.9V to 2.5V. They are packaged in a compact, SIP package rated at 10A. Standard features include remote on/off, over current and short circuit protection, output voltage adjust and industrial temperature range (-40° to +85° C). The output is closely regulated and the efficiency is typically 95% @ 2.5V output at full load. These products may be used almost anywhere low voltage silicon is employed and a 3.3V source is available. Typical applications include file servers, routers, line cards and other computing and communications equipment. Applications • • • • Distributed power architectures Data networking equipment Telecommunications Computers and peripherals Part Number Selection Output Voltage 2.5V 1.8V 1.5V 1.2V 0.9V Input Voltage 3.3V 3.3V 3.3V 3.3V 3.3V Max. Output Current 10A 10A 10A 10A 10A Max. Output Power 25W 18W 15W 12W 9W Typical Efficiency 95% 92.5% 91.5% 90% 87% Part Number Remote Sense Active Low V7PB-10C25L V7PB-10C18L V7PB-10C15L V7PB-10C12L V7PB-10C09L Part Number Remote Sense Active High V7PB-10C25S V7PB-10C18S V7PB-10C15S V7PB-10C12S V7PB-10C09S ©2003 Bel Fuse Inc. Specifications subject to change without notice. 09.03 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 1 POWER PRODUCTS BP03V7PB-10C NON-ISOLATED DC/DC CONVERTERS 3.3V Input / 0.9V – 2.5V Output / 10A Absolute Maximum Ratings Parameter Continuous Input Voltage Output Enable Terminal Voltage Ambient Temperature Storage Temperature Symbol Vin Vouten Tamb Tstor Min -0.3 -0.3 -40 -55 Typical Max 4 6 85 105 Unit V V °C °C Note: Use beyond the maximum ratings may cause a reliability degradation of the DC/DC converter or may permanently damage the device. Input Specifications Parameter Operating Input Voltage Input Current 2.5V 1.8V 1.5V 1.2V 0.9V No Load Input Current 2.5V 1.8V 1.5V 1.2V 0.9V Remote Off Input Current 2.5V 1.8V 1.5V 1.2V 0.9V Input Reflected Ripple Current1 2.5V 1.8V 1.5V 1.2V 0.9V Input Reflected Ripple Current 1 2.5V 1.8V 1.5V 1.2V 0.9V I2t Inrush Current Transient 2.5V 1.8V 1.5V 1.2V 0.9V Turn On Voltage Threshold Turn Off Voltage Threshold ©2003 Bel Fuse Inc. Module All Symbol Vin Iin Min 3 Typical 3.3 Max 3.6 Units V A 10 7.3 6.2 5.0 3.9 mA 120 165 150 180 165 220 220 220 220 220 mA 6 6 3 3 3 10 10 10 10 10 mArms 25 30 30 28 23 60 60 60 60 60 mApk 80 95 95 92 75 150 150 150 150 150 A2s 0.020 0.010 0.010 0.006 0.006 2.8 2.5 V V All All Note: Input capacitance two 270µF/ 16V, ESR = 0.018 Ω max at 100kHz @ 25° C. 1. With simulated source impedance of 500nH, 5Hz to 20MHz. Specifications subject to change without notice. 09.03 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 2 NON-ISOLATED DC/DC CONVERTERS 3.3V Input / 0.9V – 2.5V Output / 10A Output Specifications Parameter Output Voltage Set Point 1 2.5V 1.8V 1.5V 1.2V 0.9V Load Regulation 2.5V 1.8V 1.5V 1.2V 0.9V Line Regulation 2.5V 1.8V 1.5V 1.2V 0.9V Regulation Over Temperature 2.5V 1.8V 1.5V 1.2V 0.9V Total Output Voltage Regulation 2.5V 1.8V 1.5V 1.2V 0.9V Output Ripple and Noise 2 2.5V 1.8V 1.5V 1.2V 0.9V Output Ripple and Noise 2 2.5V 1.8V 1.5V 1.2V 0.9V Output Current Range Output DC Current Limit Shor t Circuit Surge 2.5V 1.8V 1.5V 1.2V 0.9V Turn on Time Overshoot at Turn On Output Capacitance All All All Cout 0 Ton All All Iout Ioutlim Ioutsurge 0.23 0.22 0.22 0.20 0.27 6 0 10 3 5600 ms % µF 0 13 5 6 6 6 5 10 10 10 10 10 10 25 A A A2 s 20 25 25 22 20 40 40 40 40 40 mVrms 40 28 22 22 17 70 54.5 42 37 32 mVpk 30 20 15 15 10 50 40 30 25 20 mV 4 3 3 3 3 7.5 5.5 4.5 4.5 4.5 mV 6 5 4 4 4 12.5 9.0 7.5 7.5 7.5 mV Module Symbol Vout 2.450 1.764 1.470 1.176 0.882 2.5 1.8 1.5 1.2 0.9 2.550 1.836 1.530 1.224 0.918 mV Min Typical Max Units V POWER PRODUCTS BP03V7PB-10C Note: All specifications are typical at nominal input, full load at 25° C unless otherwise stated. 1. Vin = 3.3V, Iout = full load, Ta = 25° C. 2. 0 - 20MHz, 1µF ceramic cap on output. ©2003 Bel Fuse Inc. Specifications subject to change without notice. 09.03 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 3 POWER PRODUCTS BP03V7PB-10C NON-ISOLATED DC/DC CONVERTERS 3.3V Input / 0.9V – 2.5V Output / 10A Output Specifications Parameter Transient Response 3 Module Symbol Min Typical Max Units ∆V 50% to 100% of Max Load Settling Time 2.5V ∆V 100% to 50% of Max Load Settling Time Transient Response 3 90 Ts 30 100 Ts 30 130 50 130 50 mV µs mV µs ∆V 50% to 100% of Max Load Settling Time 1.8V ∆V 100% to 50% of Max Load Settling Time Transient Response 3 85 Ts 30 90 Ts 30 120 50 120 50 mV µs mV µs ∆V 50% to 100% of Max Load Settling Time 1.5V ∆V 100% to 50% of Max Load Settling Time Transient Response 3 80 Ts 30 85 Ts 30 120 50 120 50 mV µs mV µs ∆V 50% to 100% of Max Load Settling Time 1.2V ∆V 100% to 50% of Max Load Settling Time Transient Response 3 80 Ts 30 85 Ts 30 110 50 110 50 mV µs mV µs ∆V 50% to 100% of Max Load Settling Time 0.9V ∆V 100% to 50% of Max Load Settling Time Ts Ts 75 30 75 30 100 50 100 50 mV µs mV µs Note: All specifications are typical at nominal input, full load at 25° C unless otherwise stated. 3. di/dt = 0.5A/1µS, Ta = 25° C without external load capacitance. ©2003 Bel Fuse Inc. Specifications subject to change without notice. 09.03 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 4 NON-ISOLATED DC/DC CONVERTERS 3.3V Input / 0.9V – 2.5V Output / 10A General Specifications Parameter Efficiency1 2.5V 1.8V 1.5V 1.2V 0.9V Switching Frequency All All Fsw Module Symbol η 92 90.5 89 88 85 250 90 95 92.5 91.5 90 87 300 340 110 10 All 9.2 Min Typical Max POWER PRODUCTS BP03V7PB-10C Units % kHz Output Voltage Trim Range2 Remote Sense Compensation Weight % % g 1. Vin=3.3V, full load and Ta=25° C. 2. See graphs on pages 11-15. Control Specifications Parameter Remote On/Off 3 Module All Symbol Vouten Min Typical Max Units V Signal Low (Unit Off) V7PB-10CxxS Signal High (Unit On) Signal Low (Unit On) V7PB-10CxxL Signal High (Unit Off) -0.3 2.5 -0.3 2.5 0.8 5.5 0.8 5.5 V V V V 3. With remote on/off pin 11 open, the module is on. Note: On/off pin designed to work with an open collector/drain switch. ©2003 Bel Fuse Inc. Specifications subject to change without notice. 09.03 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 5 POWER PRODUCTS BP03V7PB-10C NON-ISOLATED DC/DC CONVERTERS 3.3V Input / 0.9V – 2.5V Output / 10A Efficiency Data Module 2.5V Module 1.8V 95% 96% 94% Efficiency 93% 91% 89% Efficiency 1 2 3 4 5 6 7 8 9 10 92% 90% 88% 86% Output Current 3.0V 3.3V 3.6V 87% 85% 83% 81% 79% 77% 75% 1 2 3 4 5 6 7 8 9 10 Output Current 3.0V 3.3V 3.6V Module 1.5V 93% 91% 89% Efficiency 87% 85% 83% 81% 79% 77% 75% 1 2 3 4 5 6 7 8 9 10 Output Current 3.0V 3.3V 3.6V Module 1.2V 91% 89% 87% 85% 83% 81% 79% 77% 75% 73% 71% 69% 67% 65% 1 2 3 4 5 6 7 8 9 10 Output Current 3.0V 3.3V 3.6V 90% 88% 86% 84% 82% 80% 78% 76% 74% 72% 70% 68% 66% 64% 62% 60% 1 2 3 4 Module 0.9V Efficiency Efficiency 5 6 7 8 9 10 Output Current 3.0V 3.3V 3.6V ©2003 Bel Fuse Inc. Specifications subject to change without notice. 09.03 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 6 NON-ISOLATED DC/DC CONVERTERS 3.3V Input / 0.9V – 2.5V Output / 10A Ripple and Noise 1µF ceramic cap added at the output. POWER PRODUCTS BP03V7PB-10C Ripple and noise at full load and 3.3Vdc input, 2.5Vdc output and Ta=25° C Ripple and noise at full load and 3.3Vdc input, 1.8Vdc output and Ta=25° C Ripple and noise at full load and 3.3Vdc input, 1.5Vdc output and Ta=25° C Ripple and noise at full load and 3.3Vdc input, 1.2Vdc output and Ta=25° C Ripple and noise at full load and 3.3Vdc input, 0.9Vdc output and Ta=25° C ©2003 Bel Fuse Inc. Specifications subject to change without notice. 09.03 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 7 POWER PRODUCTS BP03V7PB-10C NON-ISOLATED DC/DC CONVERTERS 3.3V Input / 0.9V – 2.5V Output / 10A Transient Response Transient response: di/dt = 0.5A/µS, no external load capacitance Vout=2.5V 50% to 100% load transients at 3.3V input and Ta=25° C Vout=2.5V 100% to 50% load transients at 3.3V input and Ta=25° C Vout=1.8V 50% to 100% load transients at 3.3V input and Ta=25° C Vout=1.8V 100% to 50% load transients at 3.3V input and Ta=25° C Vout=1.5V 50% to 100% load transients at 3.3V input and Ta=25° C ©2003 Bel Fuse Inc. Specifications subject to change without notice. 09.03 Vout=1.5V 100% to 50% load transients at 3.3V input and Ta=25° C Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 8 NON-ISOLATED DC/DC CONVERTERS 3.3V Input / 0.9V – 2.5V Output / 10A Transient Response Transient response: di/dt = 0.5A/µS, no external load capacitance POWER PRODUCTS BP03V7PB-10C Vout=1.2V 50% to 100% load transients at 3.3V input and Ta=25° C Vout=1.2V 100% to 50% load transients at 3.3V input and Ta=25° C Vout=0.9V 50% to 100% load transients at 3.3V input and Ta=25° C Vout=0.9V 100% to 50% load transients at 3.3V input and Ta=25° C ©2003 Bel Fuse Inc. Specifications subject to change without notice. 09.03 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 9 POWER PRODUCTS BP03V7PB-10C NON-ISOLATED DC/DC CONVERTERS 3.3V Input / 0.9V – 2.5V Output / 10A Thermal Considerations V7PB-10C Output Voltage Set-Point Adjustment Trim Down Circuit Vout Sense Module Trim Gnd Rtrim Down Trim Up Circuit Vout Sense Module Trim Rtrim Up Gnd ©2003 Bel Fuse Inc. Specifications subject to change without notice. 09.03 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 10 NON-ISOLATED DC/DC CONVERTERS 3.3V Input / 0.9V – 2.5V Output / 10A POWER PRODUCTS BP03V7PB-10C Output Voltage Set-Point Adjustment V7PB-10C25S Trim Resistor Calculation Vo_nom = 2.504 Unit:Volt Rtrim_down ( Vo_adj) :=   Rtrim_up ( Vo_adj) :=   −2  Vo_nom − Vo_adj  2.15⋅ ( Vo_adj − 0.8)  Unit:Kohm 1.72 −2   Vo_adj − Vo_nom  Unit:Kohm V7PB-10C25S Rtrim_down Curve 912.75 732.26 551.76 Rtrim_down( Vo_adj) 371.26 190.77 10.27 2.25 2.3 2.35 Vo_adj 2.4 2.45 2.5 V7PB-10C25S Rtrim_up Curve 228.56 172.67 Rtrim_up ( Vo_adj) 116.78 60.88 4.99 2.51 2.56 2.61 Vo_adj 2.65 2.7 2.75 ©2003 Bel Fuse Inc. Specifications subject to change without notice. 09.03 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 11 POWER PRODUCTS BP03V7PB-10C NON-ISOLATED DC/DC CONVERTERS 3.3V Input / 0.9V – 2.5V Output / 10A Output Voltage Set-Point Adjustment V7PB-10C18S Trim Resistor Calculation Vo_nom = 1.804 Unit:Volt 2⋅ ( Vo_adj − 0.8) Rtrim_down ( Vo_adj) :=   Rtrim_up ( Vo_adj) :=    Vo_nom − Vo_adj  − 1.78  Unit:Kohm 1.6  − 1.78   Vo_adj − Vo_nom  Unit:Kohm V7PB-10C18S Rtrim_down Curve 360.08 271.84 Rtrim_down( Vo_adj) 183.6 95.35 7.11 1.62 1.66 1.69 Vo_adj 1.73 1.76 1.8 V7PB-10C18S Rtrim_up Curve 230.4 174.63 Rtrim_up ( Vo_adj) 118.87 63.1 7.33 1.81 1.84 1.88 Vo_adj 1.91 1.95 1.98 ©2003 Bel Fuse Inc. Specifications subject to change without notice. 09.03 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 12 NON-ISOLATED DC/DC CONVERTERS 3.3V Input / 0.9V – 2.5V Output / 10A Output Voltage Set-Point Adjustment V7PB-10C15S Trim Resistor Calculation POWER PRODUCTS BP03V7PB-10C Vo_nom = 1.504 Unit:Volt 2.15⋅ ( Vo_adj − 0.8)   − 1.78  Vo_nom − Vo_adj  1.72 Unit:Kohm Rtrim_down ( Vo_adj) :=   Rtrim_up ( Vo_adj) :=    Vo_adj − Vo_nom   − 1.78  Unit:Kohm V7PB-10C15S Rtrim_down Curve 325.57 245.66 Rtrim_down( Vo_adj) 165.74 85.83 5.91 1.35 1.38 1.41 Vo_adj 1.44 1.47 1.5 V7PB-10C15S Rtrim_up Curve 218.82 166.61 Rtrim_up ( Vo_adj) 114.4 62.19 9.98 1.51 1.54 1.57 Vo_adj 1.59 1.62 1.65 ©2003 Bel Fuse Inc. Specifications subject to change without notice. 09.03 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 13 POWER PRODUCTS BP03V7PB-10C NON-ISOLATED DC/DC CONVERTERS 3.3V Input / 0.9V – 2.5V Output / 10A Output Voltage Set-Point Adjustment V7PB-10C12S Trim Resistor Calculation Vo_nom = 1.204 Unit:Volt 2.15⋅ ( Vo_adj − 0.8)   − 0.825  Vo_nom − Vo_adj  Unit:Kohm Rtrim_down ( Vo_adj) :=   Rtrim_up ( Vo_adj) :=   1.72   − 0.825  Vo_adj − Vo_nom  Unit:Kohm V7PB-10C12S Rtrim_down Curve 168.08 127.07 Rtrim_down( Vo_adj) 86.05 45.04 4.03 1.08 1.1 1.13 Vo_adj 1.15 1.18 1.2 V7PB-10C12S Rtrim_up Curve 235.24 179.93 Rtrim_up ( Vo_adj) 124.63 69.32 14.01 1.21 1.23 1.25 Vo_adj 1.28 1.3 1.32 ©2003 Bel Fuse Inc. Specifications subject to change without notice. 09.03 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 14 NON-ISOLATED DC/DC CONVERTERS 3.3V Input / 0.9V – 2.5V Output / 10A Output Voltage Set-Point Adjustment V7PB-10B090 Trim Resistor Calculation Vo_nom = 0.903 Unit:Volt 1.05⋅ ( Vo_adj − 0.8)   − 0.010  Vo_nom − Vo_adj  POWER PRODUCTS BP03V7PB-10C Rtrim_down ( Vo_adj) :=   Rtrim_up ( Vo_adj) :=   Unit:Kohm 0.84   − 0.010  Vo_adj − Vo_nom  Unit:Kohm V7PB-10C09S Rtrim_down Curve 31.68 25.36 19.05 Rtrim_down( Vo_adj) 12.73 6.42 0.1 0.81 0.83 0.85 Vo_adj 0.86 0.88 0.9 V7PB-10C09S Rtrim_up Curve 102.23 78.84 Rtrim_up ( Vo_adj) 55.45 32.07 8.68 0.91 0.93 0.95 Vo_adj 0.96 0.98 1 ©2003 Bel Fuse Inc. Specifications subject to change without notice. 09.03 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 15 POWER PRODUCTS BP03V7PB-10C NON-ISOLATED DC/DC CONVERTERS 3.3V Input / 0.9V – 2.5V Output / 10A Mechanical V7PB-10C 0.387 [9.84] 0.224 [5.70] 2.00 [50.80] 0.55 [13.97] 0.063 [1.60] 0.15 [3.81] 0.025 [0.64] 0.05 [1.27] 0.09 [2.30] max 0.10 [2.54] 12345 6 7 8 91011 Pin 1 2 3 4 5 6 7 8 9 10 11 Function +Vo +Vo Remote Sense Option +Vo Ground Ground +Vin +Vin No Pin Trim Remote On/Off ©2003 Bel Fuse Inc. Specifications subject to change without notice. 09.03 CORPORATE Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com FAR EAST Bel Fuse Ltd. 8F / 8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel 852-2328-5515 Fax 852-2352-3706 www.belfuse.com EUROPE Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Suite G7, Preston Lancashire, PR1 8UD, U.K. Tel 44-1772-556601 Fax 44-1772-888366 www.belfuse.com page 16