V7PB-10D15S

NON-ISOLATED DC/DC CONVERTERS 3.0V-13.2V Input 0.9V-5.0V/10A Output V7PB-10D Series • • • • • Non-Isolated High Efficiency High Power Density Excellent Thermal Performance Low Cost • • • • Remote On/Off Under-voltage Lockout (UVLO) OCP/SCP Wide Input Description The Bel V7PB-10Dxxx is part of the low cost non-isolated DC/DC power converter series. The modules use a SIP package for ease of layout and space savings. The output is closely regulated and the efficiency is typically 93% at full load. Typical features include Remote On/Off, under-voltage lockout, over-current protection and short circuit protection. Part Selection Output Voltage 5.0V 3.3V 2.5V 1.8V 1.5V 1.2V 0.9V Input Voltage 8.0V – 13.2V 4.5V – 13.2V 3.1V – 13.2V 3.0V – 13.2V 3.0V – 13.2V 3.0V – 13.2V 3.0V – 13.2V Max. Output Current 10A 10A 10A 10A 10A 10A 10A Max. Output Power 50.0W 33.0W 25.0W 18.0W 15.0W 12.0W 9.0W Typ. Efficiency at Vin=12V 93% 91% 89% 86% 84% 81% 78% Model Number Active Low V7PB-10D50L V7PB-10D33L V7PB-10D25L V7PB-10D18L V7PB-10D15L V7PB-10D12L V7PB-10D09L Model Number Active High V7PB-10D50S V7PB-10D33S V7PB-10D25S V7PB-10D18S V7PB-10D15S V7PB-10D12S V7PB-10D09S Note: Add “G” suffix at the end of the model number to indicate “Tray Packaging”. Absolute Maximum Ratings Parameter Input Voltage (continuous) Output Enable Terminal Voltage Ambient Temperature Storage Temperature Min -0.3V -0.3V -40°C -40°C Typ Max 15V 15V 85°C 125°C Notes Input Specifications Parameter Input Voltage Vo=5.0V Vo=3.3V Vo=2.5V Vo=0.9-1.8V Input Current (full load) Vin=3.3V Vin=5.0V Vin=13.2V Vin=3.3V Vin=5.0V Vin=13.2V 10.0A 8.8A 5.5A 200mA 200mA 150mA 8V 4.5V 3.1V 3.0V 13.2V 13.2V 13.2V 13.2V Min Typ Max Notes Input Current (no load) Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com NON-ISOLATED DC/DC CONVERTERS 3.0V-13.2V Input 0.9V-5.0V/10A Output Input Specifications (continued) Parameter Input Reflected Ripple Current (pk-pk) Input Reflected Ripple Current (RMS) I t Inrush Current Transient Turn-on Voltage Threshold Turn-off Voltage Threshold Vo=5.0V Vo=3.3V Vo=0.9-2.5V 2 Min - Typ 0.04A s 2.9V 2 Max 250mA 70mA 0.08A s 5.5V 3.8V 2.95V 2 Notes Tested with a 22uF tantalum input capacitor & simulated source impedance of 500nH, 5Hz to 20MHz. Output Specifications Parameter Output Voltage Set Point VO=5.0V VO=3.3V VO=2.5V VO=1.8V VO=1.5V VO=1.2V VO=0.9V Load Regulation VO=5.0V VO=3.3V VO=2.5V VO=1.8V VO=1.5V VO=1.2V VO=0.9V Line Regulation VO=5.0V VO=3.3V VO=2.5V VO=1.8V VO=1.5V VO=1.2V VO=0.9V Regulation Over Temperature (-40°C to 85 °C) VO=5.0V VO=0.9-3.3V 2mV 2mV 2mV 2mV 2mV 2mV 2mV 10mV 10mV 8mV 5mV 5mV 5mV 5mV 10mV 6mV 6mV 5mV 3mV 3mV 3mV 20mV 16mV 12mV 9mV 7mV 6mV 5mV Min 4.900V 3.247V 2.460V 1.772V 1.476V 1.181V 0.886V Typ 5.0V 3.3V 2.5V 1.8V 1.5V 1.2V 0.9V Max 5.100V 3.353V 2.540V 1.828V 1.524V 1.219V 0.914V Notes Test condition: Vin=12V, lout=full load 8mV 35mV 5mV 35mV Output Current 0A 10A Current Limit Threshold 13A 25A 2 2 Short Circuit Surge Transient 0.8A s 1.5A s Ripple and Noise Vin=12V (Test condition: 0-20MHz BW, 22uF tan. capacitor on output) VO=5.0V 75mV 120mV VO=3.3V 75mV 100mV VO=2.5V 60mV 80mV Pk-pk VO=1.5-1.8V 45mV 60mV VO=0.9-1.2V 40mV 55mV VO=5.0V 25mV 50mV VO=3.3V 25mV 40mV VO=2.5V 20mV 35mV RMS 15mV 25mV VO=1.5-1.8V 12mV 20mV VO=0.9-1.2V Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com NON-ISOLATED DC/DC CONVERTERS 3.0V-13.2V Input 0.9V-5.0V/10A Output Output Specifications (continued) Parameter Min Typ Max Ripple and Noise Vin=5.0V (Test condition: 0-20MHz BW, 22uF tan. capacitor on output) VO=1.5-3.3V 35mV 70mV Pk-pk VO=0.9-1.2V 30mV 70mV Vo=0.9-3.3V 10mV 15mV RMS Ripple and Noise Vin=3.3V (Test condition: 0-20MHz BW, 22uF tan. capacitor on output) Vo=2.5V 15mV 70mV Vo=1.8V 20mV 70mV Pk-pk Vo=1.2-1.5V 25mV 70mV Vo=0.9V 30mV 70mV Vo=2.5V 5mV 15mV Vo=1.8V 6mV 15mV RMS Vo=0.9-1.5V 8mV 15mV Turn on Time 80mS Overshoot at Turn on Output Capacitance Transient Response Vin=12V 50% ~ 100% Max Load Settling Time 100% ~ 50% Max Load Settling Time 50% ~ 100% Max Load Settling Time 100% ~ 50% Max Load Settling Time 50% ~ 100% Max Load Settling Time 100% ~ 50% Max Load Settling Time 50% ~ 100% Max Load Settling Time 100% ~ 50% Max Load Settling Time 50% ~ 100% Max Load Settling Time 100% ~ 50% Max Load Settling Time 50% ~ 100% Max Load Settling Time 100% ~ 50% Max Load Settling Time 50% ~ 100% Max Load Settling Time 100% ~ 50% Max Load Settling Time VO=0.9V VO=1.2V VO=1.5V VO=1.8V VO=2.5V VO=3.3V VO=5V 100mV 50uS 100mV 50uS 80mV 40uS 60mV 40uS 60mV 40uS 40mV 40uS 60mV 40uS 40mV 40uS 60mV 50uS 40mV 50uS 60mV 40uS 40mV 40uS 40mV 40uS 40mV 40uS 150mV 80uS 150mV 80uS 120mV 80uS 100mV 80uS 100mV 80uS 80mV 80uS 100mV 80uS 80mV 80uS 90mV 80uS 80mV 80uS 90mV 80uS 80mV 80uS 80mV 80uS 80mV 80uS di/dt = 0.5A/uS; Vin = 12V; Ta = 25°C and with a 470uF Aluminum capacitor at the output 0uF 5%Vo,set 3300uF Notes Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com NON-ISOLATED DC/DC CONVERTERS 3.0V-13.2V Input 0.9V-5.0V/10A Output Output Specifications (continued) Parameter Transient Response Vin=5.0V 50% ~ 100% Max Load Settling Time 100% ~ 50% Max Load Settling Time 50% ~ 100% Max Load Settling Time 100% ~ 50% Max Load Settling Time 50% ~ 100% Max Load Settling Time 100% ~ 50% Max Load Settling Time Transient Response Vin=3.3V 50% ~ 100% Max Load Settling Time 100% ~ 50% Max Load Settling Time 50% ~ 100% Max Load Settling Time 100% ~ 50% Max Load Settling Time 50% ~ 100% Max Load Settling Time 100% ~ 50% Max Load Settling Time 50% ~ 100% Max Load Settling Time 100% ~ 50% Max Load Settling Time 50% ~ 100% Max Load Settling Time 100% ~ 50% Max Load Settling Time VO=0.9V VO=1.2V VO=1.5V VO=1.8V VO=2.5V 150mV 50uS 150mV 50uS 130mV 50uS 130mV 50uS 120mV 50uS 120mV 50uS 140mV 50uS 140mV 50uS 120mV 50uS 120mV 50uS 200mV 80uS 200mV 80uS 180mV 80uS 180mV 80uS 160mV 80uS 160mV 80uS 180mV 80uS 180mV 80uS 160mV 80uS 160mV 80uS di/dt = 0.5A/uS; Vin = 3.3V; Ta = 25°C and with a 470uF Aluminum capacitor at the output VO=0.9-1.5V VO=1.8V VO=2.5-3.3V Min Typ 120mV 50uS 120mV 50uS 110mV 50uS 110mV 50uS 80mV 50uS 80mV 50uS Max 160mV 80uS 160mV 80uS 150mV 80uS 150mV 80uS 120mV 80uS 120mV 80uS di/dt = 0.5A/uS; Vin = 5V; Ta = 25°C and with a 470uF Aluminum capacitor at the output Notes Note: All specifications are typical at 25°C unless otherwise stated. Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com NON-ISOLATED DC/DC CONVERTERS 3.0V-13.2V Input 0.9V-5.0V/10A Output General Specifications Parameter Efficiency (Vin=12V, Io=Io-max ) VO=5.0V VO=3.3V VO=2.5V VO=1.8V VO=1.5V VO=1.2V VO=0.9V Efficiency (Vin=5.0V, Io=Io-max) VO=3.3V VO=2.5V VO=1.8V VO=1.5V VO=1.2V VO=0.9V Efficiency (Vin=3.3V, Io=Io-max) VO=2.5V VO=1.8V VO=1.5V VO=1.2V VO=0.9V Switching Frequency Vo=0.9V Vo=1.2-5.0V Output Trim Range Vo=0.9V Vo=1.2-5.0V MTBF Dimensions Inches (L × W × H) Millimeters (L × W × H) Remote sense compensation Weight 2.0 x 0.55 x 0.387 50.8 x 13.97 x 9.84 10g 10% Min 90% 87% 85% 81% 80% 77% 73% 89% 87% 83% 82% 78% 74% 89% 84% 82% 80% 77% 163KHz 180KHz 90%VO Typ 93% 91% 89% 86% 84% 81% 78% 92% 90% 87% 85% 81% 77% 92% 88% 86% 84% 80% 170KHz 200KHz 2,140,721 hours Max 187KHz 220KHz 120%VO 110%VO Calculated Per Bell Core TR-332 (IO =80%Io,max; Vo=1.8V; Vin=12V; Ta = 25°C) Notes Note: All specifications are typical at 25°C unless otherwise stated. Control Specifications Parameter Remote On/Off Signal Low (Unit Off) Signal High (Unit On) Signal Low (Unit On) Signal High (Unit Off) -0.3V 2.8V -0.3V 2.8V 0.4V 13.2V 0.4V 13.2V Min Typ Max Notes V7PB-10DxxS V7PB-10DxxL Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com NON-ISOLATED DC/DC CONVERTERS 3.0V-13.2V Input 0.9V-5.0V/10A Output Output Trim Equations Equations for calculating the trim resistor (in kΩ) given the desired adjusted voltage (Vadj) and the nominal output voltage of the converter (Vnom) are shown below. The Trim Down resistor should be connected between the Trim pin and Vout. The Trim Up resistor should be connected between the Trim pin and Ground. Only one of the resistors should be used for any given application. RTrimDown = A −B Vnom − Vadj Vout Rtrimdown Module Trim GND RTrimUp = Vadj C −D − Vnom Vout Module Trim Rtrimup GND Vnom 5.5 3.3 2.5 1.8 1.5 1.2 0.9 A 31.58 11.63 7.92 4.69 3.25 1.78 - B 17.51 13.74 13.74 21.55 21.55 9.07 - C 6.01 3.72 3.72 3.72 3.72 3.54 1.46 D 10.00 9.09 9.09 16.90 16.90 4.64 0.909 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com NON-ISOLATED DC/DC CONVERTERS 3.0V-13.2V Input 0.9V-5.0V/10A Output Efficiency Data 95.0% 90.0% EFFICIENCY 85.0% 80.0% 75.0% 70.0% 65.0% 1 2 3 4 5 6 7 OUTPUT CURRENT 8 9 10 12.0V EFFICIENCY Module 5.0V Module 3.3V 95.0% 90.0% 85.0% 80.0% 75.0% 70.0% 1 2 3 4 5 6 7 8 9 10 OUTPUT CURRENT 5.0V 12.0V Module 2.5V 95.0% 90.0% 95.0% 90.0% EFFICIENCY 85.0% 80.0% 75.0% 70.0% 65.0% 60.0% 1 2 3 4 5 6 7 OUTPUT CURRENT 8 9 10 Module 1.8V EFFICIENCY 85.0% 80.0% 75.0% 70.0% 65.0% 3.3V 5.0V 12.0V 3.3V 5.0V 12.0V 1 2 3 4 5 6 7 OUTPUT CURRENT 8 9 10 Module 1.5V 95.0% 90.0% EFFICIENCY 85.0% 80.0% 75.0% 70.0% 65.0% 60.0% 55.0% 1 2 3 4 5 6 7 OUTPUT CURRENT 8 9 10 Module 1.2V 100.0% 90.0% EFFICIENCY 80.0% 70.0% 60.0% 50.0% 40.0% 30.0% 20.0% 1 2 3 4 5 6 7 OUTPUT CURRENT 8 9 10 3.3V 5V 12V 3.3V 5.0V 12.0V Module 0.9V 90.0% 80.0% EFFICIENCY 70.0% 60.0% 50.0% 40.0% 30.0% 20.0% 1 2 3 4 5 6 7 OUTPUT CURRENT 8 9 10 3.3V 5V 12V Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com NON-ISOLATED DC/DC CONVERTERS 3.0V-13.2V Input 0.9V-5.0V/10A Output Thermal Derating Curves Vin=13.2V Vin=5.5V & Vin=3.63V Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com NON-ISOLATED DC/DC CONVERTERS 3.0V-13.2V Input 0.9V-5.0V/10A Output Pin Connections Pin 1 2 3 4 5 6 7 8 9 10 11 Function Vo+ Vo+ Opt. Remote Sense (+) Vo+ Ground Ground Vin+ Vin+ Not used Trim Remote On/Off 2003 Bel Fuse Inc. Specifications subject to change without notice. 120704 CORPORATE Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com FAR EAST Bel Fuse Ltd. 8F/ 8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel 852-2328-5515 Fax 852-2352-3706 www.belfuse.com EUROPE Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Suite G7, Preston Lancashire, PR1 8UD, U.K. Tel 44-1772-556601 Fax 44-1772-888366 www.belfuse.com