VRAH-01KX5N

NON-ISOLATED DC/DC CONVERTERS 9.0 Vdc - 18 Vdc Input -12 Vdc/1 A -15 Vdc/0.8 A Output xRAH-01KXxN Series • • • Non-Isolated High Efficiency Fixed Frequency (400 kHz) RoHS Compliant • • • Rev.A Low Profile Package Remote On/Off Active Low Description The Bel xRAH-01KXxN is part of the low cost non-isolated dc/dc converter series. The modules use a SMD or SIP package for ease of layout and space savings. The output is closely regulated and the efficiency is typically 87% at full load. Part Selection Output Voltage -12 Vdc -15 Vdc Input Voltage 9 Vdc - 18 Vdc 9 Vdc - 18 Vdc Max. Output Current 1.0 A 0.8 A Max. Output Power 12 W 12 W Typical Efficiency 87% 87% Part Number Surface Mount SRAH-01KX2N SRAH-01KX5N Part Number Vertical Mount VRAH-01KX2N VRAH-01KX5N Notes: 1. Add “0” suffix at the end of the model number to indicate “Tube Packaging”, and “R” for “Reel Packaging”, and “G” for “Tray Packaging”. 2. All part numbers above indicate RoHS 6. Change the second letter "R" to "7" for RoHS 5 part numbers. Absolute Maximum Ratings Parameter Input Voltage (continuous) Remote On/Off (Active Low) Ambient Temperature Storage Temperature Min -0.3 V -0.3 V -40 °C -55 °C Typ Max 20 V 20 V 85 °C 125 °C Notes Input Specifications Parameter Input Voltage Input Current (no load) Input Current (full load) Remoted Off Input Current Input Reflected Ripple Current (pk-pk) Input Reflected Ripple Current (rms) I t Inrush Current Transient Turn-on Voltage Threshold Turn-off Voltage Threshold 2 Min 9V 8.0 V 7.2 V Typ 40 mA 18 mA 95 mA 30 mA 0.003 A s 8.5 V 7.6 V 2 Max 18 V 55 mA 1.6 A 25 mA 130 mA 40 mA 0.01 A s 8.8 V 8.2 V 2 Notes With simulated source impedance of 500 nH, 5 Hz to 20 MHz; Use one 100 uF/25 V tantalum capacitor and one 470 uF/35 V electrolytic capacitor at the input. Note: All specifications are typical at 25 °C unless otherwise stated. Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com NON-ISOLATED DC/DC CONVERTERS 9.0 Vdc - 18 Vdc Input -12 Vdc/1 A -15 Vdc/0.8 A Output Output Specifications Parameter Output Voltage Set Point Vo=-12 V Vo=-15 V Line Regulation Load Regulation Regulation Over Temperature (-40°C to +85 °C) Output Current Vo=-12 V Vo=-15 V Output DC Current Limit Vo=-12 V Vo=-15 V Ripple and Noise (rms) Ripple and Noise (pk-pk) Turn On Time Vo=-12 V Vo=-15 V Overshoot at Turn on Output Capacitance Transient Response Overshoot 50% ~ 75% Max Load Settling Time 75% ~ 50% Max Load 50% ~ 75% Max Load 75% ~ 50% Max Load Overshoot Settling Time Overshoot Settling Time Overshoot Settling Time Vo=-15 V 68 uF Vo=-12 V 30 mS 200 mS 0% 240mV 150 uS 240 mV 150 uS 300mV 150 uS 300 mV 150 uS 45 mS 300 mS 5% 100 uF 320 mV 200 uS 320 mV 200 uS 400 mV 200 uS 400 mV 200 uS di/dt = 0.5 A/ uS; Vin = 12 V; and with one 68 uF tantalum capacitor at the output Min -11.7 V -14.7 V 0.030 A 0.030 A 1.5 A 1.5 A Typ -12 V -15 V 20 mV 25 mV 90 mV 35 mV 100 mV Max -12.3 V -15.3 V 35 mV 45 mV 140 mV 1.0 A 0.8 A 2.5 A 2.5 A 50 mV 150 mV Test conditions: BW = 0-20MHz; with one 68 uF tantalum capacitor and one 0.1 uF ceramic capacitor at the output Notes Test condition: Vin=12 V, lout=full load - - - - Note: All specifications are typical at nominal input, full load at 25 °C unless otherwise stated. General Specifications Parameter Efficiency Switching Frequency MTBF Dimensions (surface mount) Inches (L × W × H) Millimeters (L × W × H) Dimensions (vertical) Inches (L × W × H) Millimeters (L × W × H) Weight Min 85% 350 kHz Typ 87% 400 kHz TBD Max 450 kHz Notes Measured at Vin=12 V, full load Calculated Per Bell Core SR-332 (IO = Nominal; Ta = 25 °C) 0.78 x 0.7 x 0.32 19.81 x 17.78 x 8.13 0.7 x 0.308 x 0.65 17.78 x 7.82 x 16.51 5g - - Note: All specifications are typical at 25 °C unless otherwise stated. Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com NON-ISOLATED DC/DC CONVERTERS 9.0 Vdc - 18 Vdc Input -12 Vdc/1 A -15 Vdc/0.8 A Output Control Specifications Parameter Remote On/Off Signal Low (Unit On) Signal High (Unit Off) -0.3 V 2.8 V 0.3 V Vin xRAH-01KXxN Remote On/Off pin open, unit on. Min Typ Max Notes Note: All specifications are typical at 25 °C unless otherwise stated. Efficiency Data Effciency Data 100.0% 80.0% 60.0% 40.0% 20.0% 0.0% 0.100 0.250 0.500 0.750 1.000 Output Current (A) xRAH-01KX2N 9V 12V 18V Efficiency Data 100.0% 80.0% 60.0% 40.0% 20.0% 0.0% 0.100 0.250 0.500 0.650 0.800 Output Current (A) xRAH-01KX5N Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com 9V 12V 18V NON-ISOLATED DC/DC CONVERTERS 9.0 Vdc - 18 Vdc Input -12 Vdc/1 A -15 Vdc/0.8 A Output Thermal Derating Curves xRAH-01KX2N xRAH-01KX5N Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com NON-ISOLATED DC/DC CONVERTERS 9.0 Vdc - 18 Vdc Input -12 Vdc/1 A -15 Vdc/0.8 A Output Ripple and Noise Waveforms Ripple and noise at no load, Vin=12 Vdc, Vo=-12 Vdc Ripple and noise at full load, Vin=12 Vdc, Vo=-12 Vdc Ripple and noise at no load, Vin=12 Vdc, Vo=-15 Vdc Ripple and noise at full load, Vin=12 Vdc, Vo=-15 Vdc Note: Ripple and noise with one 68 uF tantalum capacitor and one 0.1 uF ceramic capacitor at the output, Ta=25 deg C. Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com NON-ISOLATED DC/DC CONVERTERS 9.0 Vdc - 18 Vdc Input -12 Vdc/1 A -15 Vdc/0.8 A Output Transient Response Waveforms 50% to 75% load transient at Vin=12 Vdc, Vo=-12 Vdc 75% to 50% load transient at Vin=12 Vdc, Vo=-12 Vdc 50% to 75% load transient at Vin=12 Vdc, Vo=-15 Vdc 75% to 50% load transient at Vin=12 Vdc, Vo=-15 Vdc Note: Transient response at di/dt=0.5 A/uS, with one 68 uF tantalum capacitor at the output, and Ta=25 deg C. Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com NON-ISOLATED DC/DC CONVERTERS 9.0 Vdc - 18 Vdc Input -12 Vdc/1 A -15 Vdc/0.8 A Output Mechanical Outline SRAH-01KXxN Pin Connections Pin Function Remote On/Off Vin Ground Vout N/A N/A N/A bel 1 2 3 4 5 6 7 VRAH-01KXxN Pin Connections Pin 1 Function Remote On/Off Vin Ground Vout N/A bel bel 2 3 4 5 RoHS Compliance Complies with the European Directive 2002/95/EC, calling for the elimination of lead and other hazardous substances from electronic products. These parts are not however compatible with the higher temperatures associated with lead free solder processes and must be soldered using a reflow profile with a peak temperature of no more than 240 ºC. ©2007 Bel Fuse Inc. Specifications subject to change without notice. 010907 CORPORATE Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com FAR EAST Bel Fuse Ltd. 8F/ 8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel 852-2328-5515 Fax 852-2352-3706 www.belfuse.com EUROPE Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Suite G7, Preston Lancashire, PR1 8UD, U.K. Tel 44-1772-556601 Fax 44-1772-888366 www.belfuse.com