VRPB-06B250

NON-ISOLATED DC/DC CONVERTERS 5V Input / 1.5 – 3.3V Output / 6A VRPB-06B Series • • • • • • • • • Nonisolated Industry standard pinout with shorter package length Fixed frequency High efficiency Excellent thermal performance Low cost Remote on/off Undervoltage lockout Over current and short circuit protection POWER PRODUCTS BP06VRPB-06B RoHS Compliant Description The Bel VRPB-06B series modules are non-isolated, step down DC/DC power converters that operate from a nominal 5V source. These converters are available in a range of output voltages from 1.5V to 3.3V. They are packaged in an industry standard single-in-line footprint and provide a maximum 6A output. Standard features include remote on/off, over current protection and output voltage adjust. Optional features include remote sense and industrial temperature range. These products may be used almost anywhere low-voltage silicon is employed and a 5V source is available. Typical applications include file servers, routers, line cards and other computing and communications equipment. Applications • • • Telecommunications Networking Computers and peripherals Options • • Remote sense Industrial temperature range Part Number Selection Output Voltage 3.3V 2.5V 1.5V Input Voltage 5V 5V 5V Max. Output Current 6A 6A 6A Max. Output Power 19.8W 15.0W 9.0W Typical Efficiency 94% 91% 87% Part Number VRPB-06B330 VRPB-06B250 VRPB-06B150 Part Number Remote Sense Option VRPB-06B33S VRPB-06B25S VRPB-06B15S ©2006 Bel Fuse Inc. Specifications subject to change without notice. 06.06 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 1 POWER PRODUCTS BP06VRPB-06B NON-ISOLATED DC/DC CONVERTERS 5V Input / 1.5 – 3.3V Output / 6A Absolute Maximum Ratings Parameter Continuous Input Voltage Output Enable Terminal Voltage Ambient Temperature Storage Temperature Symbol Vin Vouten Tamb Tstor Min -0.3 -0.3 0 -40 Typical Max 6 6 70 105 Unit V V °C °C Use beyond the maximum ratings may cause a reliability degradation of the DC/DC converter or may permanently damage the device. Input Specifications Parameter Operating Input Voltage Input Current No Load Input Current Remote Off Input Current Input Reflected Ripple Current1 Input Reflected Ripple Current (P-P)1 I2t Inrush Current Transient Turn On Voltage Threshold Turn Off Voltage Threshold 3.45 0.01 4 3.9 4.45 3 Symbol Vin Iin Min 4.5 Typical Max 5.5 5.5 50 10 35 120 0.02 Units V A mA mA mArms mApk A2s V V Note: Input capacitance 330µF/10V, ESR = 0.03 Ω max at 100kHz @ 25° C. 1. With simulated source impedance of 500nH, 5Hz to 20MHz. ©2006 Bel Fuse Inc. Specifications subject to change without notice. 06.06 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 2 NON-ISOLATED DC/DC CONVERTERS 5V Input / 1.5 – 3.3V Output / 6A Output Specifications Parameter Output Voltage Set Point1 3.3V 2.5V 1.5V Load Regulation 3.3V 2.5V 1.5V Line Regulation Regulation Over Temperature 0° - 70° C All 7 5 3 3 16 10 10 10 Module Symbol Vout 3.234 2.450 1.470 3.3 2.5 1.5 3.366 2.550 1.530 Min Typical Max POWER PRODUCTS BP06VRPB-06B Units V mV mV mV 3.3V 2.5V 1.5V 10 10 10 46 35 21 mV Total Output Voltage Regulation 3.3V 2.5V 1.5V Output Ripple and Noise2 Output Ripple and Noise2 Output Current Range Output DC Current Limit Short Circuit Surge 3.3V 2.5V 1.5V Turn on Time Overshoot at Turn On Output Capacitance Transient Response 3 ∆V 50% to 100% of Max Load Settling Time ∆V 100% to 50% of Max Load Settling Time All 50 Ts 20 100 40 Ts 50 20 100 40 All All All Cout 0 Ton All All All All Iout Ioutlim Ioutsurge 0.08 0.03 0.05 12 0 0.2 0.1 0.1 20 3 2200 0 7.8 20 18 16 60 13 72 55 40 100 20 6 15 mVp-p mVrms A A A2s ms % µF mV µs mV µs Note: All specifications are typical at nominal input, full load at 25° C unless otherwise stated. 1. Vin=5V, Iout=full load, Ta=25° C. 2. 0 - 20MHz BW, 0.1µF ceramic cap on output. 3. di/dt=0.5A/uS, Vin=5 VDC, Ta=25° C with a 47µF aluminum cap on output. ©2006 Bel Fuse Inc. Specifications subject to change without notice. 06.06 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 3 POWER PRODUCTS BP06VRPB-06B NON-ISOLATED DC/DC CONVERTERS 5V Input / 1.5 – 3.3V Output / 6A General Specifications Parameter Efficiency1 3.3V 2.5V 1.5V Switching Frequency Output Voltage Trim Range 3.3V 2.5V 1.5V Remote Sense Compensation Weight All All 6.1 70 70 90 110 110 110 0.5 V g All Fsw Module Symbol η 91 88 84 230 94 91 87 300 340 kHz % Min Typical Max Units % 1. Vin=5V, full load and Ta=25° C. Control Specifications Parameter Remote On/Off Signal Low (Unit On) Signal High (Unit Off) Module All All All Symbol Vouten -0.3 2.8 0.3 5.5 Min Typical Max Units V V V Thermal Considerations This product operates at maximum output current over the entire specified temperature range in a convection cooled environment. No thermal derating is necessary. ©2006 Bel Fuse Inc. Specifications subject to change without notice. 06.06 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 4 NON-ISOLATED DC/DC CONVERTERS 5V Input / 1.5 – 3.3V Output / 6A Efficiency Data 97% 96% EFFICIENCY 95% 94% 93% 92% 91% 90% 1 2 3 4 5 6 OUTPUT CURRENT POWER PRODUCTS BP06VRPB-06B Module 3.3V 4.5V 5.0V 5.5V Module 2.5V 96% 95% 94% 93% 92% 91% 90% 89% 88% 1 2 3 4 5 6 OUTPUT CURRENT EFFICIENCY 4.5V 5.0V 5.5V Module 1.5V 93% 92% 91% 90% 89% 88% 87% 86% 85% 84% 1 2 3 4 5 6 OUTPUT CURRENT EFFICIENCY 4.5V 5.0V 5.5V ©2006 Bel Fuse Inc. Specifications subject to change without notice. 06.06 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 5 POWER PRODUCTS BP06VRPB-06B NON-ISOLATED DC/DC CONVERTERS 5V Input / 1.5 – 3.3V Output / 6A Ripple and Noise Ripple and noise at full load and 5Vdc input and Ta=25° C Transient Response Transient response: di/dt = 0.5A/µS, external load capacitance Co = 47µF (electrolytic) 50% to 100% load transients at 5V input and Ta=25° C 100% to 50% load transients at 5V input and Ta=25° C ©2006 Bel Fuse Inc. Specifications subject to change without notice. 06.06 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 6 NON-ISOLATED DC/DC CONVERTERS 5V Input / 1.5 – 3.3V Output / 6A Mechanical 0.20 [5.08] 0.063 [1.60] 0.342 [8.69] max POWER PRODUCTS BP06VRPB-06B 2.16 [54.86] 0.13 [3.30] 0.10 [2.54] 1.90 [48.26] 0.55 [13.97] 0.13 [3.30] 0.025 [0.64] 0.291 [7.40] Dimensions are in inches [millimeters]. Standard dimension tolerance is ±0.005 [0.13] unless otherwise noted. Pin 1 2 3* 4 5 6 7 8 9 10 11 Function +Vo +Vo No Pin +Vo Ground Ground +Vin +Vin No Pin Trim Remote On/Off 12345 6 7 8 9 10 11 *Pin 3 used for remote sense option. RoHS Compliance Complies with the European Directive 2002/95/EC, calling for the elimination of lead and other hazardous substances from electronic products. ©2006 Bel Fuse Inc. Specifications subject to change without notice. 06.06 CORPORATE Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com FAR EAST Bel Fuse Ltd. 8F / 8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel 852-2328-5515 Fax 852-2352-3706 www.belfuse.com EUROPE Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Suite G7, Preston Lancashire, PR1 8UD, U.K. Tel 44-1772-556601 Fax 44-1772-888366 www.belfuse.com page 7