VRPC-04C50W1

NON-ISOLATED DC/DC CONVERTERS 3.3 Vdc Input 5.0 Vdc / 4 A Output xRPC-04C50x • • • Non-Isolated High Efficiency Fixed Frequency RoHS Compliant • • • Low Cost Rev.A High Power Density Industry Standard Footprint Description The xRPC-04C50x series are part of low-cost non-isolated boost dc/dc converters that operate from a nominal 3.3 Vdc source. The modules use a SIP package for ease of layout and space savings. The output is closely regulated and the efficiency for 5.0 Vdc output is typically 92.5% at full load. Standard features include high efficiency, fixed frequency, industry standard footprint and high power density. Part Selection Output Voltage 5.0 Vdc Input Voltage 3.3 Vdc Max. Output Current 4A Max. Output Power 20 W Typical Efficiency 92.5% Model Number Without Coating VRPC-04C50A Model Number With Coating 1 VRPC-04C50W Notes: 1. “W” indicates special coating. 2. Replace the first letter of the model number with "0" for horizontal mount package. 3. Add “G” suffix at the end of the model numbers listed above to indicate “Tray Packaging”. 4. All part numbers above indicate RoHS 6. Change the second letter "R" to "7" for RoHS 5 part numbers. Absolute Maximum Ratings Parameter Input Voltage (continuous) Ambient Temperature Storage Temperature Min -0.3 V -40 °C -40 °C Typ Max 5V 85 °C 125 °C Notes Note: Use beyond the maximum ratings may cause a reliability degradation of the dc/dc converter or may permanently damage the device. Input Specifications Parameter Operating Input Voltage Input Current (full load) Input Current (no load) Input Reflected Ripple Current (pk-pk) Input Reflected Ripple Current (rms) I t Inrush Current Transient 2 Min 3V - Typ 120 mA 25 mA 0.01 A s 2 Max 4V 8A 400 mA 200 mA 50 mA 0.02 A s 2 Notes Tested with a 270 uF/10 V input capacitor with ESR=0.03 ohm max at 100 kHz & simulated source impedance of 500 nH, 5 Hz to 20 MHz. Note: All specifications are typical at 25 °C unless otherwise stated. Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com NON-ISOLATED DC/DC CONVERTERS 3.3 Vdc Input 5.0 Vdc / 4 A Output Output Specifications Parameter Output Voltage Set Point Load Regulation Line Regulation Regulation Over Temperature (-40 °C to 85 °C) Output Current Output Ripple and Noise (pk-pk) Output Ripple and Noise (rms) Turn on Time Overshoot at Turn on Output Capacitance Transient Response 50% ~ 100% Max Load Settling Time 100% ~ 50% Max Load Settling Time VO = 5.0 V 100 mV 200 uS 100 mV 200 uS 200 mV 500 uS 200 mV 500 uS di/dt=0.1 A/uS; Vin=3.3 V; and with external 220 uF Tantalum capacitor & 1 uF / 10 V ceramic capacitor at the output. Min 4.9 V 0A 0 uF Typ 5.0 V 10 mV 5 mV 15 mV 50 mV 15 mV 10 mS 0% Max 5.1 V 25 mV 15 mV 45 mV 4A 100 mV 30 mV 3% 1600 uF Test conditions: 0-20 MHz BW, with external 1 uF / 10 V ceramic capacitor at the output Notes Notes: 1. This module has no internal OVP. An external OVP protection is always employed. 2. All specifications are typical at nominal input, full load at 25 °C unless otherwise stated. General Specifications Parameter Efficiency Switching Frequency MTBF Dimensions Inches (L × W × H) Millimeters (L × W × H) Weight Min 89% 200 kHz Typ 92.5% 250 kHz 8,754,928 hours 2.5 x 0.55 x 0.34 63.50 x 13.98 x 8.64 2.5 x 0.55 x 0.375 63.50 x 13.98 x 9.53 9.2 g Max 300 kHz Calculated Per Bell Core SR-332 (IO = 80% load; Vin=3.3 V; Ta = 25 °C) VRPC-04C50x 0RPC-04C50x Notes Vin=3.3 V, full load Note: All specifications are typical at 25 °C unless otherwise stated. Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com NON-ISOLATED DC/DC CONVERTERS 3.3 Vdc Input 5.0 Vdc / 4 A Output Efficiency Data 5V Module 100.0% 95.0% 90.0% Efficiency 85.0% 80.0% 75.0% 70.0% 65.0% 60.0% 0.5 1.0 2.0 Output Current 3.0 4.0 3.0V 3.3V 4.0V Thermal Derating Curve Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com NON-ISOLATED DC/DC CONVERTERS 3.3 Vdc Input 5.0 Vdc / 4 A Output Ripple and Noise Waveform Note: Ripple and noise at max load, 3.3 Vdc input, 5 Vdc output, 0-20 MHz BW, with 1 uF/10 V ceramic capacitor, and Ta=25 deg C Transient Response Waveforms 25% to 50% load step at 3.3 Vdc input, 5 Vdc output 50% to 25% load step at 3.3 Vdc input, 5 Vdc output Note: Transient response at di/dt=0.1 A/uS, with 220 uF/10 V tantalum capacitor at the output, and Ta=25 deg C. Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com NON-ISOLATED DC/DC CONVERTERS 3.3 Vdc Input 5.0 Vdc / 4 A Output Mechanical Outline VRPC-04C50x Pin Connections Pin 1 2 3 4 5 6 7 8 9 10 11 Function Vo+ Vo+ Vo+ Vo Vo Vin Vin Vin+ Vin+ Vin+ Vin+ Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com NON-ISOLATED DC/DC CONVERTERS 3.3 Vdc Input 5.0 Vdc / 4 A Output Mechanical Outline (continued) 0RPC-04C50x Pin Connections Pin 1 2 3 4 5 6 7 8 9 10 11 Function Vo+ Vo+ Vo+ Vo+ Vo Vin Vin Vin+ Vin+ Vin+ Vin+ RoHS Compliance Complies with the European Directive 2002/95/EC, calling for the elimination of lead and other hazardous substances from electronic products. ©2007 Bel Fuse Inc. Specifications subject to change without notice. 013007 CORPORATE Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com FAR EAST Bel Fuse Ltd. 8F/ 8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel 852-2328-5515 Fax 852-2352-3706 www.belfuse.com EUROPE Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Suite G7, Preston Lancashire, PR1 8UD, U.K. Tel 44-1772-556601 Fax 44-1772-888366 www.belfuse.com