NON-ISOLATED DC/DC CONVERTERS
3.3V Input / 1.5 – 2.5V Output / 10A VRPC-10C Series
• • • • • • • • • Nonisolated Industry standard pinout Fixed frequency High efficiency means less power dissipation High power density Optimized for cost Remote on/off Undervoltage lockout Over current and short circuit protection
POWER PRODUCTS
BP06VRPC-10C
RoHS Compliant
Description
The Bel VRPC-10C series modules are non-isolated, DC/DC power converters that operate from a nominal 3.3V source. These converters are available in a range of output voltages from 1.5V to 2.5V. They are packaged in an industry standard single-in-line footprint with 10A maximum output. Standard features include remote on/off, over current and short circuit protection and output voltage adjust. Remote sense is an optional feature. These products may be used almost anywhere low voltage silicon is employed and a 3.3V source is available. Typical applications include file servers, routers, line cards and other computing and communications equipment.
Applications
• • • Telecommunications Networking Computers and peripherals
Options
• Remote Sense
Part Number Selection
Output Voltage 2.5V 1.8V 1.5V Input Voltage 3.3V 3.3V 3.3V Max. Output Current 10A 10A 10A Max. Output Power 25W 18W 15W Typical Efficiency 92% 87% 86% Part Number VRPC-10C250 VRPC-10C180 VRPC-10C150 Part Number Remote Sense Option VRPC-10C25S VRPC-10C18S VRPC-10C15S
©2006 Bel Fuse Inc. Specifications subject to change without notice. 06.06
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 1
POWER PRODUCTS
BP06VRPC-10C
NON-ISOLATED DC/DC CONVERTERS
3.3V Input / 1.5 – 2.5V Output / 10A
Absolute Maximum Ratings
Parameter Continuous Input Voltage Output Enable Terminal Voltage Ambient Temperature Storage Temperature Symbol Vin Vouten Tamb Tstor Min -0.3 -0.3 0 -40 Typical Max 4 4 70 125 Unit V V °C °C
Note: Use beyond the maximum ratings may cause a reliability degradation of the DC/DC converter or may permanently damage the device.
Input Specifications
Parameter Operating Input Voltage Input Current No Load Input Current Remote Off Input Current Input Reflected Ripple Current1 Input Reflected Ripple Current (P-P)1 I2t Inrush Current Transient Turn On Voltage Threshold Turn Off Voltage Threshold 10 20 90 0.02 2.85 2.3 Symbol Vin Iin Min 3 Typical 3.3 Max 3.6 9.2 100 22 40 150 0.05 Units V A mA mA mArms mApk A2s V V
Note: Input capacitance 2 x 270µF/16V, ESR = 0.03 Ω max at 100kHz @ 25° C. 1. With simulated source impedance of 500nH, 5Hz to 20MHz.
©2006 Bel Fuse Inc. Specifications subject to change without notice. 06.06
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 2
NON-ISOLATED DC/DC CONVERTERS
3.3V Input / 1.5 – 2.5V Output / 10A
POWER PRODUCTS
BP06VRPC-10C
Output Specifications
Parameter Output Voltage Set Point1 2.5V 1.8V 1.5V Load Regulation 2.5V 1.8V 1.5V Line Regulation 2.5V 1.8V 1.5V Regulation Over Temperature 0° - 70° C 3 2.5 2 7.5 5.4 4.5 mV 2.5V 1.8V 1.5V 12 10 7 30 20 15 mV 2.5V 1.8V 1.5V Output Ripple and Noise2 Output Ripple and Noise2 Output Current Range Output DC Current Limit Short Circuit Surge 2.5V 1.8V 1.5V Turn on Time Overshoot at Turn On Output Capacitance All All All Cout 0 Ton All All All All Iout Ioutlim Ioutsurge 0.15 0.27 0.27 10 0.2 0.5 0.5 20 3 4000 ms % µF 0 13 70 18 50 34.4 27 100 25 10 25 mVp-p mVrms A A A2s 7.5 5.4 4.5 12.5 9.0 7.5 mV Module Symbol Vout 2.45 1.76 1.47 2.5 1.8 1.5 2.55 1.84 1.53 mV Min Typical Max Units V
Total Output Voltage Regulation
Note: All specifications are typical at nominal input, full load at 25° C unless otherwise stated. 1. Vin = 3.3V, Iout = full load, Ta = 25° C. 2. 0 - 20MHz BW, 0.1µF ceramic cap on output.
©2006 Bel Fuse Inc. Specifications subject to change without notice. 06.06
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 3
POWER PRODUCTS
BP06VRPC-10C
NON-ISOLATED DC/DC CONVERTERS
3.3V Input / 1.5 – 2.5V Output / 10A
Output Specifications
Parameter Transient Response 3 ∆V 50% to 100% of Max Load Settling Time ∆V 100% to 50% of Max Load Settling Time Transient Response 3 ∆V 50% to 100% of Max Load Settling Time ∆V 100% to 50% of Max Load Settling Time Transient Response 3 ∆V 50% to 100% of Max Load Settling Time ∆V 100% to 50% of Max Load Settling Time 1.5V 100 Ts 35 150 50 mV µs Ts 100 35 150 50 mV µs 1.8V 100 Ts 35 150 50 mV µs Ts 100 35 150 50 mV µs 2.5V 100 Ts 35 150 50 mV µs Ts 100 35 150 50 mV µs Module Symbol Min Typical Max Units
Note: All specifications are typical at nominal input, full load at 25° C unless otherwise stated. 3. di/dt = 0.5A/uS, Vin = 3.3VDC, Ta = 25° C, and with a 470µF aluminum cap on output.
©2006 Bel Fuse Inc. Specifications subject to change without notice. 06.06
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 4
NON-ISOLATED DC/DC CONVERTERS
3.3V Input / 1.5 – 2.5V Output / 10A
POWER PRODUCTS
BP06VRPC-10C
General Specifications
Parameter Efficiency1 2.5V 1.8V 1.5V Module Symbol η 88 84 82 92 87 86 Min Typical Max Units %
Switching Frequency Output Voltage Trim Range2
All
Fsw
250
300
340
kHz %
2.5V 1.8V 1.5V Remote Sense Compensation 2.5V 1.8V 1.5V Weight All
90 90 90
105 110 110 % 5 10 10 8.3 g
1. Vin=3.3V, full load and Ta=25° C. 2. Total adjustment of trim, setpoint and remote sense combined should not exceed 5% @nominal Vin, 25° C ambient for the 2.5V output module.
Control Specifications
Parameter Remote On/Off Signal Low (Unit Off) Signal High (Unit On) Module All All All Symbol Vouten -0.3 2.8 0.3 4 Min Typical Max Units V V V
©2006 Bel Fuse Inc. Specifications subject to change without notice. 06.06
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 5
POWER PRODUCTS
BP06VRPC-10C
NON-ISOLATED DC/DC CONVERTERS
3.3V Input / 1.5 – 2.5V Output / 10A
Efficiency Data
99.0% 97.0% EFFICIENCY 95.0% 93.0% 91.0% 89.0% 87.0% 85.0% 0.0 2.0
Module 2.5V
3.0V 3.3V 3.6V
4.0
6.0
8.0
10.0
OUTPUT CURRENT
Module 1.8V 94.0% 92.0% EFFICIENCY 90.0% 88.0% 86.0% 84.0% 82.0% 80.0% 0.0 2.0 4.0 6.0 8.0 10.0 3.0V 3.3V 3.6V
OUTPUT CURRENT
Module 1.5V 94.0% 92.0% EFFICIENCY 90.0% 88.0% 86.0% 84.0% 82.0% 80.0% 0.0 2.0 4.0 6.0 8.0 10.0 3.0V 3.3V 3.6V
OUTPUT CURRENT
©2006 Bel Fuse Inc. Specifications subject to change without notice. 06.06
CORPORATE
Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com
FAR EAST
Bel Fuse Ltd. 8F / 8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel 852-2328-5515 Fax 852-2352-3706 www.belfuse.com
EUROPE
Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Suite G7, Preston Lancashire, PR1 8UD, U.K. Tel 44-1772-556601 Fax 44-1772-888366 www.belfuse.com
page 6
POWER PRODUCTS
BP06VRPC-10C
NON-ISOLATED DC/DC CONVERTERS
3.3V Input / 1.5 – 2.5V Output / 10A
Ripple and Noise
Ripple and noise at full load and 3.3Vdc input, 2.5V output and Ta=25° C
Ripple and noise at full load and 3.3Vdc input, 1.8V output and Ta=25° C
Ripple and noise at full load and 3.3Vdc input, 1.5V output and Ta=25° C
©2006 Bel Fuse Inc. Specifications subject to change without notice. 06.06
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 7
POWER PRODUCTS
BP06VRPC-10C
NON-ISOLATED DC/DC CONVERTERS
3.3V Input / 1.5 – 2.5V Output / 10A
Transient Response
Transient response: di/dt = 0.5A/µS, external load capacitance Co = 470µF (electrolytic)
Vout=2.5V 50% to 100% load transients at 3.3V input and Ta=25° C
Vout=2.5V 100% to 50% load transients at 3.3V input and Ta=25° C
Vout=1.8V 50% to 100% load transients at 3.3V input and Ta=25° C
Vout=1.8V 100% to 50% load transients at 3.3V input and Ta=25° C
Vout=1.5V 50% to 100% load transients at 3.3V input and Ta=25° C
©2006 Bel Fuse Inc. Specifications subject to change without notice. 06.06
Vout=1.5V 100% to 50% load transients at 3.3V input and Ta=25° C
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 8
POWER PRODUCTS
BP06VRPC-10C
NON-ISOLATED DC/DC CONVERTERS
3.3V Input / 1.5 – 2.5V Output / 10A
Thermal Considerations
100LFM 200LFM Derating Curve 10 8 6 4 2 0 0˚C 10˚C 25˚C 40˚C 55˚C 70˚C 85˚C Natural Convection 300LFM
Output Current (A)
Ambient Temperature, Ta (˚C) Output Current vs. Local Ambient Temperature and Air Velocity
©2006 Bel Fuse Inc. Specifications subject to change without notice. 06.06
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 9
POWER PRODUCTS
BP06VRPC-10C
NON-ISOLATED DC/DC CONVERTERS
3.3V Input / 1.5 – 2.5V Output / 10A
Mechanical
0.55 [13.97] 0.361 [9.18] 0.063 [1.60]
0.20 [5.08]
2.50 [63.50]
0.025 [0.64] 0.10 [2.54] 0.28 [7.11] 1.90 [48.26] 0.13 [3.30] 0.183 [4.65]
Dimensions are in inches [millimeters]. Standard dimension tolerance is ±0.005 [0.13] unless otherwise noted.
Pin 1 2 3* 4 5 6 7 8 9 10 11
Function +Vo +Vo No Pin +Vo Ground Ground +Vin +Vin No Pin Trim Remote On/Off
1 2345
6 7 8 9 10 11
*Pin 3 used for remote sense option.
RoHS Compliance
Complies with the European Directive 2002/95/EC, calling for the elimination of lead and other hazardous substances from electronic products.
©2006 Bel Fuse Inc. Specifications subject to change without notice. 06.06
CORPORATE
Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com
FAR EAST
Bel Fuse Ltd. 8F / 8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel 852-2328-5515 Fax 852-2352-3706 www.belfuse.com
EUROPE
Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Suite G7, Preston Lancashire, PR1 8UD, U.K. Tel 44-1772-556601 Fax 44-1772-888366 www.belfuse.com
page 10
