BD0926_1

BD0926 Dedicated Band 2-Way SMT Power Divider 700~1000MHz Cellular & GSM900 Device Features      Typical Isolation = 23 dB Typical Insertion Loss = 0.6 dB MSL 1 moisture rating Small Size and Low Profile Lead-free/RoHS-compliant SOT-26 Plastic Package BD09XX(XX=Wafer number) Product Description BeRex’s Divider BD0926 is designed for Cellular & GSM band with low Insertion Loss and Isolation. This chip is fully passivated for enhanced performance and reliability and packaged in RoHS-compliant with SOT-26 surface mount package. Typical Performance1 Parameter Frequency Range Insertion Loss Isolation IRL(S11) ORL(S22/S33) Amplitude Balance Phase Balance Min 700 0.6 16.5 23.0 -17.0 -20.0 0.05 0.4 -14.5 -15.0 0.2 0.5 Typical Max 1000 0.8 Unit MHz dB dB dBm dBm dB deg *All specifications apply to the following test conditions, 1. Device performance _ measured on BeRex E/B at 25°C, 50ohm system. 2. Insertion Loss: Above 3.0dB. Applications  Base station Infrastructure  Commercial/Industrial/Military wireless system Absolute Maximum Ratings Parameter Input Power Storage Temperature Operating Temperature Rating 1W CW dBm -55 to +155°C -40 to +85°C Operation of this device above any of these parameters may result in permanent damage. Evaluation Board Drawing Function Block Diagram Pins 2,4 and 6 must be DC and RF grounded. BeRex ● website: www.berex.com ● email: sales@berex.com 1 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BD0926 Dedicated Band 2-Way SMT Power Divider 700~1000MHz Cellular & GSM900 Typical Test Data Parameters Frequency Range Insertion Loss Isolation IRL(S11) ORL(S22,S33) Phase Diff. Amplitude Balance Unit MHz dB dB dB dB deg dB 700 0.54 17.39 -16.30 -27.8 0.13 0.01 750 0.55 22.03 -17.18 -25.66 0.22 0.01 Cellular & GSM900 800 0.55 30.99 -17.68 -22.59 0.23 0.01 850 0.57 31.43 -17.87 -20.03 0.23 0.01 900 0.59 23.06 -17.30 -18.20 0.24 0.02 950 0.63 18.99 -16.15 -16.69 0.41 0.02 1000 0.70 16.37 -14.75 -15.50 0.42 0.02 Insertion Loss vs. Frequency Isolation vs. Frequency IRL vs. Frequency ORL vs. Frequency BeRex ● website: www.berex.com ● email: sales@berex.com 2 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BD0926 Dedicated Band 2-Way SMT Power Divider 700~1000MHz Cellular & GSM900 Package Outline Drawing Suggested PCB Land Pattern and PAD Layout PCB Land Pattern Ø0.8 2.3 0.4 0.65 PCB Mounting 0.9 2.2 Ø0.8 Note : All dimension _ millimeters PCB lay out _ on BeRex website BeRex ● website: www.berex.com ● email: sales@berex.com 3 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BD0926 Dedicated Band 2-Way SMT Power Divider 700~1000MHz Cellular & GSM900 Lead plating finish 100% Tin Matte finish (All BeRex products undergoes a 1 hour, 150 degree C, Anneal bake to eliminate thin whisker growth concerns.) MSL / ESD Rating MSL Rating: Standard: Level 3 at +265°C convection reflow JEDEC Standard J-STD-020 NATO CAGE code: 2 N 9 6 F BeRex ● website: www.berex.com ● email: sales@berex.com 4 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C