BIF3_1

BIF3 5-800 MHz Internally Matched IF Amplifier Device Features       OIP3 = 44.0 dBm @ 70 MHz Gain = 20.3 dB @ 70 MHz Output P1 dB = 23.5 dBm @ 70 MHz 50 Ω Cascadable Patented over voltage protection Lead-free/RoHS-compliant SOT-89 SMT package Product Description BeRex’s BIF3 is a high performance InGaP/ GaAs HBT MMIC amplifier, internally matched to 50 Ohms and uses a patented over voltage protection circuit to protect a internal device. The BIF3 is designed for high linearity IF amplifier that requires excellent gain, high OIP3 and flatness. It is packaged in a RoHS-compliant with SOT-89 surface mount package. Typical Performance1 Parameter 70 Gain S11 S22 OIP3 2 Frequency 140 20.2 -18.0 -17.0 41.5 24.5 5.2 250 19.9 -15.0 -16.0 40.5 24.5 5.2 500 19.0 -11.0 -13.0 40.5 24.2 5.3 800 17.9 -8.0 -11.0 39.5 24.0 5.3 Unit MHz dB dB dB dBm dBm dB 20.3 -19.0 -16.0 44.0 23.5 5.1 1 2 P1dB Noise Figure Device performance _ measured on a BeRex evaluation board at 25°C, 50 Ω system. OIP3 _ measured with two tones at an output of 8 dBm per tone separated by 1 MHz. Applications  Base station Infrastructure/RFID  Commercial/Industrial/Military wireless system Bandwidth IC @ (Vc = 5V) VC dG/dT RTH Min. 5 75 Typical 85 5.0 -0.004 45 Max. 800 97 Unit MHz mA V dB/°C °C/W Applications Circuit Absolute Maximum Ratings Parameter Operating Case Temperature Storage Temperature Junction Temperature Operating Voltage Supply Current Input RF Power Above 7V, a device goes to protection mode. *C1, C2=8200pF ± 5%; C3 = 100 pF ± 5%; C4 = 1000pF ±5% *C5 = 10uF; L1 = 680nH ±5% Rating -40 to +85 -55 to +155 +220 +7.0 140 23 Unit °C °C °C V mA dBm Operation of this device above any of these parameters may result in permanent damage. BeRex ● website: www.berex.com ● email: sales@berex.com 1 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BIF3 5-800 MHz Internally Matched IF Amplifier V-I Characteristics BeRex SOT89 Evaluation Board BeRex Evaluation Board *Dielectric constant _ 4.2 *RF pattern width 52mil *31mil thick FR4 PCB Typical Device Data S-parameters (Vc=5V, Ic=80mA, T=25°C) BeRex ● website: www.berex.com ● email: sales@berex.com 2 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BIF3 5-800 MHz Internally Matched IF Amplifier S-Parameter (Vdevice = 5.0V, Icc = 85mA, T = 25 °C, calibrated to device leads) Freq [MHz] 100 500 1000 1500 2000 2500 3000 3500 4000 S11 [Mag] 0.624 0.678 0.748 0.788 0.790 0.861 0.873 0.955 1.037 S11 [Ang] 178.2 164.5 144.2 121.2 102.1 76.9 54.1 26.4 -3.3 S21 [Mag] 10.523 7.809 5.812 4.823 4.095 3.935 4.121 3.614 3.252 S21 [Ang] 169.9 137.3 155.4 100.6 82.6 74.1 51.6 30.1 11.4 S12 [Mag] 0.059 0.069 0.067 0.078 0.070 0.076 0.072 0.061 0.060 S12 [Ang] 1.5 0.3 -0.4 -7.1 -23.9 -17.5 -41.4 -39.1 -53.2 S22 [Mag] 0.096 0.162 0.223 0.272 0.271 0.305 0.327 0.347 0.362 S22 [Ang] -26.0 -107.1 -156.6 167.3 140.3 116.8 94.2 75.9 55.0 Typical Performance (Vd = 5V, Ic = 85mA, T = 25°C) Freq S21 S11 S22 P1 OIP3 NF MHz dB dB dB dBm dBm dB 70 20.3 -19 -16 23.5 44 5.1 140 20.2 -18 -17 24.5 41.5 5.2 250 19.9 -15 -16 24.5 40.5 5.2 500 19.0 -11 -13 24.2 40.5 5.3 800 17.9 -8 -11 24.0 39.5 5.3 Typical Performance (Vd = 4.7V, Ic = 64mA, T = 25°C) Freq S21 S11 S22 P1 OIP3 NF MHz dB dB dB dBm dBm dB 70 20.1 -27.2 -13.1 22.9 35.0 5.1 140 19.9 -24.6 -12.6 23.5 38.5 5.2 250 19.7 -16.8 -13 23.3 39.5 5.2 500 18.9 -11.3 -12.5 23.3 36.5 5.3 800 17.6 -9.3 -9.7 22.7 35.3 5.3 Typical Performance (Vd = 4.5V, Ic = 54mA, T = 25°C) Freq S21 S11 S22 P1 OIP3 NF BeRex MHz dB dB dB dBm dBm dB 70 20.2 -18.8 -14.1 22.1 34.5 5.1 140 20.2 -19 -16 23.0 37.5 5.2 250 19.8 -16.1 -15.1 23.1 34.5 5.2 500 18.7 -11.8 -11.8 22.6 35.5 5.3 800 17.5 -9.2 -9.6 22.2 34.5 5.3 3 ● website: www.berex.com ● email: sales@berex.com Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BIF3 5-800 MHz Internally Matched IF Amplifier Typical Performance (Vd = 4V, Ic = 28mA, T = 25°C) Freq S21 S11 S22 P1 OIP3 NF MHz dB dB dB dBm dBm dB 70 19.5 -18.4 -12.3 20.7 35 5.1 140 19.4 -18.5 -13.8 21.2 29 5.2 250 19.1 -15.8 -13.5 21.2 27.5 5.2 500 18.1 -11.5 -11.3 20.7 25.5 5.3 800 16.8 -8.9 -9.4 13.5 31 5.3 BeRex ● website: www.berex.com ● email: sales@berex.com 4 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BIF3 5-800 MHz Internally Matched IF Amplifier Device Performance OIP3 BeRex ● website: www.berex.com ● email: sales@berex.com 5 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BIF3 5-800 MHz Internally Matched IF Amplifier ACPR BeRex ● website: www.berex.com ● email: sales@berex.com 6 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BIF3 5-800 MHz Internally Matched IF Amplifier ACLR S-Parameters(S11/S22) Gain Flatness BeRex ● website: www.berex.com ● email: sales@berex.com 7 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BIF3 5-800 MHz Internally Matched IF Amplifier Package Outline Dimension Suggested PCB Land Pattern and PAD Layout PCB Land Pattern 0.40 1.30 0.40 PCB Mounting Ø0.40 0.40 0.75 1.20 1.20 0.45 1.20 1.20 1.50 1.00 0.65 0.35 2.80 2.15 0.50 Note : All dimension _ millimeters PCB lay out _ on BeRex website BeRex ● website: www.berex.com ● email: sales@berex.com 8 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BIF3 5-800 MHz Internally Matched IF Amplifier Tape & Reel SOT89 Packaging information: Tape Width (mm): 12 Reel Size (inches): 7 Device Cavity Pitch (mm): 8 Devices Per Reel: 1000 Lead plating finish 100% Tin Matte finish (All BeRex products undergoes a 1 hour, 150 degree C, Anneal bake to eliminate thin whisker growth concerns.) MSL / ESD Rating ESD Rating: Value: Test: Standard: Class 1C Passes