BT013

BT013 1500-4000 MHz Medium Power Amplifier Device Features       OIP3 = 45.0 dBm @ 1900 MHz Gain = 15.0 dB @ 1900 MHz Output P1 dB = 27.5 dBm @ 1900 MHz 50 Ω Cascadable Patented Over Voltage Protection Circuit Lead-free/RoHS-compliant SOT-89 SMT package Typical Performance1 Parameter 1900 Gain S11 S22 OIP3 P1dB 2 Product Description BeRex’s BT013 is a high performance and a high dynamic range amplifier in a low cost surface mount package(SOT-89) with a RoHS -compliant, that incorporates reliable heterojunction-bipolar-transistor (HBT) devices fabricated with InGaP GaAs technology. This device is designed for use where high linearity is required and features high OIP3 and P1 with low consumption current (85mA) and requires a few external matching components such as a DC blocking capacitors on the In/Output pin, a bypass capacitor and a RF choke for the out port. All devices are 100% RF/DC tested. Applications  Base station Infrastructure/RFID  Commercial/Industrial/Military wireless system Frequency 2140 14.0 -12.0 -12.0 45.0 27.2 19.5 6.8 2400 13.2 -13.0 -13.0 43.0 27.0 18.5 6.8 3500 10.7 -26.0 -25.0 40.0 26.0 7.1 Unit MHz dB dB dB dBm dBm dBm dBm dB 15.0 -17.5 -12.5 45.0 27.5 21.0 6.8 IS-95C ACPR WCDMA ACLR Noise Figure 1 2 Device performance _ measured on a BeRex evaluation board at 25°C, 50 Ω system. OIP3 _ measured with two tones at an output of 13 dBm per tone separated by 1 MHz. *ACPR&ACLR CH Power _ measured at 45dBc. Min. Bandwidth IC @ (Vc = 5V) VC RTH 1500 115 Typical 135 5.0 50 Max. 4000 155 Unit MHz mA V °C/W Application Circuits Vcc Bypass RF Choke Absolute Maximum Ratings Parameter Operating Case Temperature Storage Temperature Junction Temperature Operating Voltage Supply Current Input RF Power Rating -40 to +85 -55 to +155 +220 +7.0 200 23 Unit °C °C °C V mA dBm RF In DC Block BT013 RF Out DC Block *external matching circuit: refer to the page 6 to 12. *Operation of this device above any of these parameters may result in permanent damage. BeRex ● website: www.berex.com ● email: sales@berex.com 1 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT013 1500-4000 MHz Medium Power Amplifier V-I Characteristics BeRex SOT89 Evaluation Board BeRex Evaluation Board *Voltage protection works at 5~6 V *Dielectric constant _ 4.2 *RF pattern width 52mil *31mil thick FR4 PCB Typical Device Data S-parameters (Vc=5V, Ic=135mA, T=25°C) BeRex ● website: www.berex.com ● email: sales@berex.com 2 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT013 1500-4000 MHz Medium Power Amplifier S-Parameter (Vdevice = 5.0V, Icc = 135mA, T = 25 °C, calibrated to device leads) Freq [MHz] 100 500 1000 1500 2000 2500 3000 3500 4000 S11 [Mag] -0.046 -0.952 -1.111 -0.928 -1.240 -1.390 -1.669 -1.989 -2.281 S11 [Ang] -30.149 -116.77 -162.01 157.99 129.31 104.6 82.694 60.455 37.752 S21 [Mag] 2.219 6.737 13.26 10.718 9.181 8.334 6.491 6.124 5.024 S21 [Ang] -128.4 -174.18 161.56 121.35 101.55 81.201 66.725 51.795 33.795 S12 [Mag] -41.958 -32.703 -32.513 -30.171 -28.599 -26.76 -26.706 -25.792 -24.653 S12 [Ang] 66.107 25.318 76.255 46.516 42.527 37.808 32.623 26.141 20.698 S22 [Mag] -3.497 -3.457 -7.557 -7.780 -7.262 -7.180 -7.38 -7.336 -6.823 S22 [Ang] 165.97 162.64 117.5 127.17 116.25 97.537 74.648 50.666 32.131 BeRex ● website: www.berex.com ● email: sales@berex.com 3 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT013 1500-4000 MHz Medium Power Amplifier WCDMA 6FA 2140 –55dBc WCDMA 6FA 2140 –60dBc BeRex ● website: www.berex.com ● email: sales@berex.com 4 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT013 1500-4000 MHz Medium Power Amplifier ACLR BeRex ● website: www.berex.com ● email: sales@berex.com 5 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT013 1500-4000 MHz Medium Power Amplifier Application Circuit: 1900 MHz Schematic Diagram C1 C2 C3 BOM +5V Tolerance ±5% ±5% ±20% ±5% ±5% ±5% ±5% ±5% C1 C2 C3 C4 100pF 1000pF 10uF 22pF 22pF 3pF 0.5pF 100nH L1 RFin C4 BT013 C5 C6 C7 RFout C5 C6 C7 L1 10 uF Note: 1. PCB: 31mil thick FR4. 2. Distance between the center of the shunt cap (C6) and the input pin of BT013 _ 3.2mm. 3. Distance between the center of the shunt cap (C7) and the output pin of BT013 _ 8.3mm. 1000 pF 100 pF BT013 100 nH 22 pF 3 pF 0.5 pF 22 pF BeRex ● website: www.berex.com ● email: sales@berex.com 6 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT013 1500-4000 MHz Medium Power Amplifier Typical Performance BeRex ● website: www.berex.com ● email: sales@berex.com 7 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT013 1500-4000 MHz Medium Power Amplifier Application Circuit: 2140MHz Schematic Diagram C1 C2 C3 +5V BOM C1 100pF C2 C3 C4 1000pF 10uF 24pF 24pF 3pF 0.5pF 33nH Tolerance ±5% ±5% ±20% ±5% ±5% ±5% ±5% ±5% L1 RFin C4 BT013 C5 C6 C7 RFout C5 C6 C7 L1 10 uF Note: 1. PCB: 31mil thick FR4 2. Distance between the center of the shunt cap (C6) and the input pin of BT013 _ 1.5mm. 3. Distance between the center of the shunt cap (C7) and the output pin of BT013 _ 6.4mm. 1000 pF 100 pF BT013 33 nH 24 pF 3 pF 0.5 pF 24 pF BeRex ● website: www.berex.com ● email: sales@berex.com 8 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT013 1500-4000 MHz Medium Power Amplifier Typical Performance BeRex ● website: www.berex.com ● email: sales@berex.com 9 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT013 1500-4000 MHz Medium Power Amplifier Application Circuit: 2400MHz Schematic Diagram C1 C2 C3 BOM +5V Tolerance ±5% ±5% ±15% ±5% ±5% ±5% ±5% ±5% C1 C2 C3 C4 100pF 1000pF 10uF 100pF 100pF 2pF 0.5pF 33nH L1 RFin C4 BT013 C5 C6 C7 RFout C5 C6 C7 L1 10 uF Note: 1. 2. 3. PCB: 31mil thick FR4 Distance between the center of the shunt cap (C6) and the input pin of BT013 _ 0.7mm. Distance between the center of the shunt cap (C7) and the output pin of BT013 _ 3.2mm. 1000 pF 100 pF BT013 33 nH 100 pF 2 pF 0.5 pF 100 pF BeRex ● website: www.berex.com ● email: sales@berex.com 10 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT013 1500-4000 MHz Medium Power Amplifier Typical Performance BeRex ● website: www.berex.com ● email: sales@berex.com 11 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT013 1500-4000 MHz Medium Power Amplifier Application Circuit: 3500MHz Schematic Diagram C1 C2 C3 BOM +5V Tolerance ±5% ±5% ±20% ±5% ±5% ±5% ±5% ±5% ±5% C1 C2 C3 C4 C5 C6 C7 C8 L1 100pF 1000pF 10uF 22pF 22pF 0.75pF 0.5pF 0.5pF 33nH L1 RFin C4 C7 BT013 C5 C8 RFout C6 Note: 10uF 1. PCB: 31mil thick FR4 Distance between the center of the shunt cap (C6) and the input pin of BT013 _ 10mm. Distance between the center of the series cap (C7) and the input pin of BT013 _ 4mm. Distance between the center of the shunt cap (C8) and the output pin of BT013 _ 3mm. 2. 1000 pF 100pF 100 pF 3. 0.5pF 22pF 0.75pF BT013 BT013 B 33nH 4. 22pF 0.5pF B BeRex ● website: www.berex.com ● email: sales@berex.com 12 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT013 1500-4000 MHz Medium Power Amplifier Typical Performance BeRex ● website: www.berex.com ● email: sales@berex.com 13 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT013 1500-4000 MHz Medium Power Amplifier Package Outline Dimension Suggested PCB Land Pattern and PAD Layout PCB Land Pattern 0.40 1.30 0.40 PCB Mounting Ø0.40 0.40 0.75 1.20 1.20 0.45 1.20 1.20 1.50 1.00 0.65 0.35 2.80 2.15 0.50 Note : All dimension are in millimeters PCB lay out _ on BeRex website BeRex ● website: www.berex.com ● email: sales@berex.com 14 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT013 1500-4000 MHz Medium Power Amplifier Tape & Reel SOT89 Packaging information: Tape Width (mm): 12 Reel Size (inches): 7 Device Cavity Pitch (mm): 8 Devices Per Reel: 1000 Lead plating finish 100% Tin Matte finish (All BeRex products undergoes a 1 hour, 150 degree C, Anneal bake to eliminate thin whisker growth concerns.) MSL / ESD Rating ESD Rating: Value: Test: Standard: Class 1B Passes