BT05CV

BT05CV 5-4000 MHz Wideband Drive Amplifier Device Features      OIP3 = 43.5 dBm @ 900 MHz Gain = 21.5 dB @ 900 MHz Output P1 dB = 23.9 dBm @ 900 MHz 50 Ω Cascadable Lead-free/RoHS-compliant SOT-89 SMT package Typical Performance1 Parameter 900 Gain S11 S22 OIP3 P1dB Noise Figure 1 2 Product Description BeRex’s BT05CV is a high performance and a high dynamic range amplifier in a low cost surface mount package(SOT-89) with a RoHS -compliant, that incorporates reliable heterojunction-bipolar-transistor (HBT) devices fabricated with InGaP GaAs technology. This device is designed for use where high linearity is required and features high OIP3 and P1 with low consumption current (85mA) and requires a few external matching components such as a DC blocking capacitors on the In/Output pin, a bypass capacitor and a RF choke for the out port. All devices are 100% RF/DC tested. Applications  Base station Infrastructure/RFID  Commercial/Industrial/Military wireless system Frequency 1900 17.5 -15 -15 42.0 23.6 4.2 2450 15.0 -17 -15 40.5 24.1 4.3 3500 11.5 -15 -18 39.5 23.8 4.5 Unit MHz dB dB dB dBm dBm dB 21.5 -18 -15 2 43.5 23.9 4.4 Device performance _ measured on a BeRex evaluation board at 25°C, 50 Ω system. OIP3 _ measured with two tones at an output of 9 dBm per tone separated by 1 MHz. Min. Bandwidth IC @ (Vc = 5V) VC RTH 5 75 Typical 85 5.0 50 Max. 4000 95 Unit MHz mA V °C/W Absolute Maximum Ratings Parameter Operating Case Temperature Storage Temperature Junction Temperature Operating Voltage Supply Current Input RF Power Rating -40 to +85 -55 to +155 +220 +6.5 180 23 Unit °C °C °C V mA dBm Application Circuits Vcc Bypass RF Choke RF In DC Block BT05CV RF Out DC Block *Operation of this device above any of these parameters may result in permanent damage. *external matching circuit: refer to the page 5 to 11. BeRex ● website: www.berex.com ● email: sales@berex.com 1 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT05CV 5-4000 MHz Wideband Drive Amplifier V-I Characteristics BeRex SOT89 Evaluation Board BeRex Evaluation Board *Dielectric constant _ 4.2 *RF pattern width 52mil *31mil thick FR4 PCB Typical Device Data S-parameters (Vc=5V, Ic=83mA, T=25°C) BeRex ● website: www.berex.com ● email: sales@berex.com 2 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT05CV 5-4000 MHz Wideband Drive Amplifier S-Parameter (Vdevice = 5.0V, Icc = 83mA, T = 25 °C, calibrated to device leads) Freq [MHz] 100 500 1000 1500 2000 2500 3000 3500 4000 S11 [Mag] 0.337 0.482 0.601 0.635 0.640 0.641 0.667 0.706 0.744 S11 [Ang] -176.993 173.684 141.786 111.242 80.507 47.530 10.847 -24.872 -56.383 S21 [Mag] 14.904 12.408 8.920 6.659 5.343 4.482 3.774 3.048 2.650 S21 [Ang] 167.360 122.325 79.312 46.287 16.028 -13.531 -43.042 -71.311 -97.173 S12 [Mag] 0.041 0.042 0.045 0.046 0.049 0.051 0.051 0.047 0.047 S12 [Ang] -2.138 -9.903 -24.247 -38.801 -54.092 -72.149 -93.463 -113.838 -134.880 S22 [Mag] 0.045 0.130 0.192 0.201 0.174 0.119 0.147 0.258 0.358 S22 [Ang] -150.827 -166.023 153.711 124.357 97.447 51.320 -12.993 -52.979 -75.184 WCDMA 6FA 2140 -55dBc BeRex ● website: www.berex.com ● email: sales@berex.com 3 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT05CV 5-4000 MHz Wideband Drive Amplifier WCDMA 6FA 2140 -60dBc ACLR BeRex ● website: www.berex.com ● email: sales@berex.com 4 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT05CV 5-4000 MHz Wideband Drive Amplifier Application Circuit: 900 MHz Schematic Diagram C1 C2 C3 BOM +5V Tolerance ± 5% ±5% ± 20% ± 5% ± 5% ±5% ±5% ± 5% C1 C2 C3 C4 100pF 1000pF 10uF 100pF 100pF 5.6pF 12nH 1.2nH L1 RFin C4 L2 BT05CV C5 RFout C5 C6 L1 L2 C6 Note: 10uF 1. PCB: 31mil thick FR4. 2. Distance between the center of the series inductor(L2) and the input pin of BT05CV _ 2.0mm. 3. Distance between the center of the shunt cap (C6) and the input pin of BT05CV _ 9.0mm. 1000 pF 100pF 100 pF 1.2nH 100pF 5.6pF BT05CV BT013 12nH B B 100pF Typical Performance BeRex ● website: www.berex.com ● email: sales@berex.com 5 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT05CV 5-4000 MHz Wideband Drive Amplifier BeRex ● website: www.berex.com ● email: sales@berex.com 6 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT05CV 5-4000 MHz Wideband Drive Amplifier Application Circuit: 1900 MHz Schematic Diagram C1 C2 C3 BOM +5V Tolerance ± 5% ±5% ±20% ± 5% ± 5% ± 5% ±5% ±5% ± 5% L1 RFin C4 BT05CV L2 C5 RFout C6 C7 C1 C2 C3 C4 C5 C6 C7 L1 L2 100pF 1000pF 10uF 100pF 100pF 2pF 1pF 6.8nH 1.2nH Note: 10uF 1. PCB: 31mil thick FR4. 2. Distance between the center of the shunt cap (C6) and the input pin of BT05CV _ 1.0mm. 3. Distance between the center of the series inductor(L2) and the output pin of BT05CV _ 3.5mm. 4. Distance between the center of the shunt cap (C7) and the output pin of BT05CV _ 10.0mm. 1000 pF 100pF 100 pF BT05CV BT013 6.8nH 100pF 2pF B B 100pF 1.2nH 1pF Typical Performance BeRex ● website: www.berex.com ● email: sales@berex.com 7 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT05CV 5-4000 MHz Wideband Drive Amplifier BeRex ● website: www.berex.com ● email: sales@berex.com 8 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT05CV 5-4000 MHz Wideband Drive Amplifier Application Circuit: 2450MHz Schematic Diagram C1 C2 C3 BOM +5V Tolerance ± 5% ±5% ±20% ± 5% ± 5% ± 5% ±5% ±5% ± 5% L1 RFin C4 BT05CV L2 C5 RFout C6 C7 C1 C2 C3 C4 C5 C6 C7 L1 L2 100pF 1000pF 10uF 100pF 100pF 1.2pF 0.75pF 12nH 1nH Note: 10uF 1. PCB: 31mil thick FR4. 2. Distance between the center of the shunt cap (C6) and the input pin of BT05CV _ 0.7mm. 3. Distance between the center of the series inductor(L2) and the output pin of BT05CV _ 3.5mm. 4. Distance between the center of the shunt cap (C7) and the output pin of BT05CV _ 7.5mm. 1000 pF 100pF 100 pF BT05CV BT013 12nH 100pF 1.2pF B B 100pF 1nH 0.75pF Typical Performance BeRex ● website: www.berex.com ● email: sales@berex.com 9 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT05CV 5-4000 MHz Wideband Drive Amplifier BeRex ● website: www.berex.com ● email: sales@berex.com 10 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT05CV 5-4000 MHz Wideband Drive Amplifier Application Circuit: 3500MHz Schematic Diagram C1 C2 C3 BOM +5V Tolerance ±5% ±5% ± 20% ± 5% ± 5% ± 5% ±5% ±5% ±5% L1 RFin C4 C7 BT05CV C5 C8 RFout C6 C1 C2 C3 C4 C5 C6 C7 C8 L1 100pF 100pF 10uF 56pF 56pF 0.5pF 0.5pF 0.5pF 6.8nH Note: 10uF 1. PCB: 31mil thick FR4. 2. Distance between the center of the series cap (C7) and the input pin of BT05CV _ 2.0mm. 3. Distance between the center of the shunt cap (C7) and the input pin of BT05CV _ 10.0mm. 4. Distance between the center of the shunt cap (C8) and the output pin of BT05CV _ 2.3mm. 1000 pF 100pF 100 pF 0.5pF 56pF 0.5pF BT05CV BT013 6.8nH B B 56pF 0.5pF Typical Performance BeRex ● website: www.berex.com ● email: sales@berex.com 11 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT05CV 5-4000 MHz Wideband Drive Amplifier BeRex ● website: www.berex.com ● email: sales@berex.com 12 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT05CV 5-4000 MHz Wideband Drive Amplifier Package Outline Dimension Suggested PCB Land Pattern and PAD Layout PCB Land Pattern 0.40 1.30 0.40 PCB Mounting Ø0.40 0.40 0.75 1.20 1.20 0.45 1.20 1.20 1.50 1.00 0.65 0.35 2.80 2.15 0.50 Note : All dimension are in millimeters PCB lay out _ on BeRex website BeRex ● website: www.berex.com ● email: sales@berex.com 13 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT05CV 5-4000 MHz Wideband Drive Amplifier Tape & Reel SOT89 Packaging information: Tape Width (mm): 12 Reel Size (inches): 7 Device Cavity Pitch (mm): 8 Devices Per Reel: 1000 Lead plating finish 100% Tin Matte finish (All BeRex products undergoes a 1 hour, 150 degree C, Anneal bake to eliminate thin whisker growth concerns.) MSL / ESD Rating ESD Rating: Value: Test: Standard: Class 1B Passes