BT05VG2

BT05VG2 1500-4000 MHz Wideband Drive Amplifier Device Features       OIP3 = 40.5 dBm @ 1900 MHz Gain = 19.0 dB @ 1900 MHz Output P1 dB = 22.7 dBm @ 1900 MHz 50 Ω Cascadable Patented Over Voltage Protection Circuit Lead-free/RoHS-compliant SOT-89 SMT package Typical Performance1 Parameter 1900 Gain S11 S22 OIP3 P1dB Noise Figure 1 2 Product Description BeRex’s BT05VG2 is a high performance and a high dynamic range amplifier in a low cost surface mount package(SOT-89) with a RoHS -compliant, that incorporates reliable heterojunction-bipolar-transistor (HBT) devices fabricated with InGaP GaAs technology. This device is designed for use where high linearity is required and features high OIP3 and P1 with low consumption current (85mA) and requires a few external matching components such as a DC blocking capacitors on the In/Output pin, a bypass capacitor and a RF choke for the out port. All devices are 100% RF/DC tested. Applications  Base station Infrastructure/RFID  Commercial/Industrial/Military wireless system Frequency 2100 18.0 -15.6 -19.1 38.0 22.0 4.0 2450 16.5 -26.1 -19.4 38.0 23.2 4.2 3500 13.7 -22.0 -20.0 39.0 23.5 4.4 Unit MHz dB dB dB dBm dBm dB 19.0 -18.5 -14.9 2 40.5 22.7 3.9 Device performance _ measured on a BeRex evaluation board at 25°C, 50 Ω system. OIP3 _ measured with two tones at an output of 11 dBm per tone separated by 1 MHz. Min. Bandwidth IC @ (Vc = 5V) VC RTH 1500 75 Typical 85 5.0 50 Max. 4000 95 Unit MHz mA V °C/W Absolute Maximum Ratings Parameter Operating Case Temperature Storage Temperature Junction Temperature Operating Voltage Supply Current Input RF Power Rating -40 to +85 -55 to +155 +220 +6.0 180 23 Unit °C °C °C V mA dBm Application Circuits Vcc Bypass RF Choke RF In DC Block BT05VG2 RF Out DC Block *Operation of this device above any of these parameters may result in permanent damage. *external matching circuit: refer to the page 5 to 11. BeRex ● website: www.berex.com ● email: sales@berex.com 1 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT05VG2 1500-4000 MHz Wideband Drive Amplifier V-I Characteristics BeRex SOT89 Evaluation Board BeRex Evaluation Board *Dielectric constant _ 4.2 *RF pattern width 52mil *31mil thick FR4 PCB Typical Device Data S-parameters (Vc=5V, Ic=90mA, T=25°C) BeRex ● website: www.berex.com ● email: sales@berex.com 2 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT05VG2 1500-4000 MHz Wideband Drive Amplifier S-Parameter (Vdevice = 5.0V, Icc = 88mA, T = 25 °C, calibrated to device leads) Freq [MHz] 100 500 1000 1500 2000 2500 3000 3500 4000 S11 [Mag] 0.270 0.484 0.603 0.649 0.727 0.812 0.860 0.845 0.768 S11 [Ang] -166.495 -165.550 169.297 142.996 119.846 103.333 91.901 82.120 68.638 S21 [Mag] 17.095 13.796 9.839 7.265 5.645 4.578 3.760 3.142 2.817 S21 [Ang] 169.234 134.745 107.471 89.329 75.285 65.518 57.542 48.480 40.568 S12 [Mag] 0.034 0.039 0.045 0.046 0.047 0.046 0.050 0.046 0.054 S12 [Ang] 2.969 9.708 8.523 6.978 7.094 7.622 4.871 4.636 0.845 S22 [Mag] 0.112 0.209 0.243 0.224 0.232 0.276 0.326 0.365 0.369 S22 [Ang] -36.553 -115.545 -138.751 -166.419 159.675 133.104 118.486 112.242 110.182 WCDMA 6FA 2140 -55dBc BeRex ● website: www.berex.com ● email: sales@berex.com 3 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT05VG2 1500-4000 MHz Wideband Drive Amplifier WCDMA 6FA 2140 -60dBc ACLR BeRex ● website: www.berex.com ● email: sales@berex.com 4 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT05VG2 1500-4000 MHz Wideband Drive Amplifier Application Circuit: 1900 MHz Schematic Diagram C1 C2 C3 BOM +5V Tolerance ± 5% ± 5% ± 20% ± 5% ± 5% ± 5% ± 5% ±5% ±5% L1 RFin C4 BT05VG2 L2 C5 C7 RFout C6 C1 C2 C3 C4 C5 C6 C7 L1 L2 100pF 1000pF 10uF 56pF 56pF 2.7pF 1.8pF 39nH 1.5nH Note: 10uF 1. PCB: 31mil thick FR4. 2. Distance between the center of the shunt cap(C6) and the input pin of BT05VG2 _ 0.8mm. 3. Distance between the center of the series inductor(L2) and the output pin of BT05VG2 _ 3.5mm. 4. Distance between the center of the shunt cap(C7) and the output pin of BT05VG2 _ 9.0mm. 1000 pF 100pF 100 pF BTT013 B 05VG2 39nH 56pF 2.7pF B B 1.5nH 1.8pF 56pF Typical Performance BeRex ● website: www.berex.com ● email: sales@berex.com 5 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT05VG2 1500-4000 MHz Wideband Drive Amplifier BeRex ● website: www.berex.com ● email: sales@berex.com 6 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT05VG2 1500-4000 MHz Wideband Drive Amplifier Application Circuit: 2100 MHz Schematic Diagram C1 C2 C3 BOM +5V Tolerance ± 5% ± 5% ± 20% ± 5% ± 5% ± 5% ± 5% ±5% ±5% L1 RFin C4 BT05VG2 L2 C5 C7 RFout C6 C1 C2 C3 C4 C5 C6 C7 L1 L2 100pF 1000pF 10uF 56pF 56pF 2.2pF 1.5pF 47nH 1nH Note: 10uF 1. PCB: 31mil thick FR4. 2. Distance between the center of the shunt cap(C6) and the input pin of BT05VG2 _ 0.7mm. 3. Distance between the center of the series inductor (L2) and the output pin of BT05VG2 _ 3.5mm. 4. Distance between the center of the shunt cap(C7) and the output pin of BT05VG2 _ 9.5mm. 1000 pF 100pF 100 pF BTT013 B 05VG2 47nH 56pF 2.2pF B B 1nH 56pF 1.5pF Typical Performance BeRex ● website: www.berex.com ● email: sales@berex.com 7 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT05VG2 1500-4000 MHz Wideband Drive Amplifier BeRex ● website: www.berex.com ● email: sales@berex.com 8 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT05VG2 1500-4000 MHz Wideband Drive Amplifier Application Circuit: 2450MHz Schematic Diagram C1 C2 C3 BOM +5V Tolerance ± 5% ± 5% ± 20% ± 5% ± 5% ± 5% ± 5% ±5% ±5% ±5% L1 RFin C4 L2 BT05VG2 L3 C5 C7 RFout C6 C1 C2 C3 C4 C5 C6 C7 L1 L2 L3 100pF 1000pF 10uF 100pF 1pF 1.5pF 0.5pF 39nH 2.7nH 1nH Note: 1. PCB: 31mil thick FR4. 10uF 2. Distance between the center of the series inductor (L2) and the input pin of BT05VG2 _ 2.5mm. 3. Distance between the center of the shunt cap(C6) and the input pin of BT05VG2 _ 0.5mm. 1pF 1000 pF 100pF 100 pF 2.7nH 100pF 1.5pF BTT013 B 05VG2 B 39nH B 1nH 0.5pF 4. Distance between the center of the series inductor (L3) and the output pin of BT05VG2 _ 3.5mm. 5. Distance between the center of the shunt cap(C7) and the output pin of BT05VG2 _ 5.5mm. Typical Performance BeRex ● website: www.berex.com ● email: sales@berex.com 9 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT05VG2 1500-4000 MHz Wideband Drive Amplifier BeRex ● website: www.berex.com ● email: sales@berex.com 10 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT05VG2 1500-4000 MHz Wideband Drive Amplifier Application Circuit: 3500MHz Schematic Diagram C1 C2 C3 BOM +5V Tolerance ± 5% ± 5% ± 20% ± 5% ± 5% ± 5% ±5% ±5% ±5% L1 RFin C4 C6 BT05VG2 C5 C8 RFout C7 C1 C2 C3 C4 C5 C6 C7 C8 L1 100pF 1000pF 10uF 22pF 22pF 0.5pF 0.75pF 0.5pF 33nH Note: 10uF 1. PCB: 31mil thick FR4. 2. Distance between the center of the series cap(C6) and the input pin of BT05VG2 _ 2.5mm. 3. Distance between the center of the shunt cap(C7) and the input pin of BT05VG2 _ 7.1mm. 4. Distance between the center of the shunt cap(C8) and the output pin of BT05VG2 _ 7.7mm. 1000 pF 100pF 100 pF 0.5pF 22pF 0.75pF BTT013 B 05VG2 B 33nH B 0.5pF 22pF Typical Performance BeRex ● website: www.berex.com ● email: sales@berex.com 11 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT05VG2 1500-4000 MHz Wideband Drive Amplifier BeRex ● website: www.berex.com ● email: sales@berex.com 12 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT05VG2 1500-4000 MHz Wideband Drive Amplifier Package Outline Dimension Suggested PCB Land Pattern and PAD Layout PCB Land Pattern 0.40 1.30 0.40 PCB Mounting Ø0.40 0.40 0.75 1.20 1.20 0.45 1.20 1.20 1.50 1.00 0.65 0.35 2.80 2.15 0.50 Note : All dimension are in millimeters PCB lay out _ on BeRex website BeRex ● website: www.berex.com ● email: sales@berex.com 13 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT05VG2 1500-4000 MHz Wideband Drive Amplifier Tape & Reel SOT89 Packaging information: Tape Width (mm): 12 Reel Size (inches): 7 Device Cavity Pitch (mm): 8 Devices Per Reel: 1000 Lead plating finish 100% Tin Matte finish (All BeRex products undergoes a 1 hour, 150 degree C, Anneal bake to eliminate thin whisker growth concerns.) MSL / ESD Rating ESD Rating: Value: Test: Standard: Class 1B Passes