BT331_1

BT331 700-2700 MHz 1.5~2.0W Power Amplifier Device Features       OIP3 = 51.0 dBm @ 1900 MHz Gain = 19.5 dB @ 900 MHz Output P1 dB = 33.3 dBm @ 1900 MHz 50 Ω Cascadable Highly Reliable InGaP/GaAs HBT Technology Lead-free/RoHS-compliant SOIC-8 SMT package Typical Performance1 Parameter 900 Gain S11 S22 OIP3 P1dB 2 YY = Year, WW = Work week, XX = Wafer Number Preliminary Datasheet Product Description BeRex’s BT331 is a high power and a high dynamic range amplifier in a low cost surface mount package(SOIC-8) with a RoHScompliant, that incorporates reliable heterojunction-bipolar-transistor (HBT) devices fabricated with InGaP GaAs technology. This device is designed for use where high linearity is required and features high OIP3 and Power with low consumption current (400mA) and requires a few external matching components such as a DC blocking capacitors on the In/Output pin, a bypass capacitor and a RF choke for the out port. Applications  Base station Infrastructure/RFID  Commercial/Industrial/Military wireless system Frequency 1900 14.0 -14.0 -11.0 51.0 33.3 23.3 5.0 2140 13.0 -15.0 -12.0 51.0 32.3 23.4 5.0 2450 12.0 -20.0 -10.0 50.0 31.0 21.5 5.3 2600 12.1 -19.0 -12.7 47.0 31.2 21.5 5.4 Unit MHz dB dB dB dBm dBm dBm dBm dB 19.5 -16.0 -11.0 50.0 31.5 23.3 4.8 IS-95C ACPR WCDMA ACLR Noise Figure 1 2 Device performance _ measured on a BeRex evaluation board at 25°C, 50 Ω system. OIP3 _ measured with two tones at an output of 20 dBm per tone separated by 1 MHz. *ACPR CH Power is measured at 55dBc, ACLR CH Power _ measured at 50dBc. *ACPR Test set-up: IS-95 CDMA, 9Ch. FWD, +885KHz offset, PAR 9.7dB at 0.01% Prob. *ACLR Test set-up: 3GPP WCDMA, TM1+64DPCH, +5MHz offset, PAR 10.34 at 0.01% Prob. Min. Bandwidth IC @ (Vc = 5V) VC RTH 700 360 Typical 410 5.0 10.0 Max. 2700 440 Unit MHz mA V °C/W Application Circuits Vcc Bypass RF Choke Absolute Maximum Ratings Parameter Operating Case Temperature Storage Temperature Junction Temperature Operating Voltage Supply Current Input RF Power Rating -40 to +85 -55 to +155 +220 +5.5 900 28 Unit °C °C °C V mA dBm RF In DC Block BT331 RF Out DC Block *external matching circuit: refer to the page 4 to 16. *Operation of this device above any of these parameters may result in permanent damage. BeRex ● website: www.berex.com ● email: sales@berex.com 1 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT331 700-2700 MHz 1.5~2.0W Power Amplifier V-I Characteristics BeRex SOT89 Evaluation Board Preliminary Datasheet *Dielectric constant _ 4.2 *RF pattern width 52mil *31mil thick FR4 PCB Typical Device Data S-parameters (Vc=5V, Ic=400mA, T=25°C) BeRex ● website: www.berex.com ● email: sales@berex.com 2 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT331 700-2700 1.5~2.0W Power Amplifier S-Parameter (Vdevice = 5.0V, Icc = 400mA, T = 25 °C, calibrated to device leads) Freq [MHz] 100 500 1000 1500 2000 2500 3000 3500 4000 S11 [Mag] 0.919 0.949 0.941 0.929 0.895 0.847 0.735 0.757 0.910 S11 [Ang] -155.332 168.743 156.029 143.815 131.767 120.721 118.042 125.918 122.065 S21 [Mag] 27.202 4.153 2.065 1.444 1.226 1.393 2.132 2.326 0.796 S21 [Ang] 171.888 90.122 78.875 71.101 65.133 57.189 32.334 -38.115 -127.288 S12 [Mag] 0.011 0.010 0.011 0.016 0.019 0.024 0.024 0.007 0.014 S12 [Ang] 81.778 35.600 47.384 48.347 50.235 47.782 2.709 -11.874 66.759 S22 [Mag] 0.335 0.805 0.833 0.840 0.838 0.839 0.848 0.904 0.495 S22 [Ang] 151.426 -179.714 170.693 163.704 158.159 153.001 147.516 140.189 79.167 Preliminary Datasheet BeRex ● website: www.berex.com ● email: sales@berex.com 3 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT331 700-2700 MHz 1.5~2.0W Power Amplifier Application Circuit: 900 MHz Schematic Diagram C1 C2 C3 C4 C5 C6 C7 C8 C9 C10 C11 C12 L1 L2 R1 R2 BOM 1680 1608 1608 1608 1608 3216 100pF 100pF 100pF 1nF 1uF 10uF NC NC 1pF 3.3pF 10pF 8pF 18nH 8.2nH 4.3KΩ 100Ω Tolerance Preliminary Datasheet R1 C7 C6 R2 C3 C4 C5 Vcc C9 C8 1 8 7 ±5% ±5% ±5% ±5% ±5% ±20% L1 RF_OUT C1 RF_IN L2 C10 C11 2 3 4 6 5 C2 C12 1608 1608 1608 1608 1608 1608 1608 1608 ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% PCB Diagram 1. 2. Notice PCB: 31mil thick FR4 Distance between the center of the shunt Inductor(L2) and the input pin of BT331 _ 6.45 mm. Distance between the center of the series cap.(C10) and the input pin of BT331 _ 2.8mm. Distance between the center of the shunt cap.(C11) and the input pin of BT331 _ 1.5 mm. Distance between the center of the shunt cap.(C12) and the output pin of BT331 _ 8.25 mm. 3. 4. 5. ※ BT331 with both input and output ports opened simultaneously may cause instability. Please See an application note or contact company for application support. BeRex ● website: www.berex.com ● email: sales@berex.com 4 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT331 700-2700 MHz 1.5~2.0W Power Amplifier Typical Performance Preliminary Datasheet BeRex ● website: www.berex.com ● email: sales@berex.com 5 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT331 700-2700 MHz 1.5~2.0W Power Amplifier Typical Performance Preliminary Datasheet BeRex ● website: www.berex.com ● email: sales@berex.com 6 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT331 700-2700 MHz 1.5~2.0W Power Amplifier Application Circuit: 1900 MHz Schematic Diagram C1 C2 C3 C4 C5 C6 C7 C8 C9 C10 C11 C12 C13 L1 R1 R2 BOM 1608 1608 1608 1608 1608 3216 1608 1608 1608 1608 1608 1608 1608 1608 1608 100pF 100pF 100pF 1nF 1uF 10uF NC 2pF 10pF 3pF 0.5pF 2.7pF 2.5pF 56nH 4.3KΩ 100Ω Tolerance Preliminary Datasheet R1 C7 C6 R2 C3 C4 C5 Vcc C9 C8 1 8 7 ±5% ±5% ±5% ±5% ±5% ±20% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% L1 RF_OUT C1 RF_IN C13 C10 C11 2 3 4 6 5 C2 C12 PCB Diagram Notice 1. 2. 3. 4. 5. PCB: 31mil thick FR4 Distance between the center of the shunt cap.(C13) and the input pin of BT331 _ 5.25 mm. Distance between the center of the series cap.(C10) and the input pin of BT331 _ 2.8mm. Distance between the center of the shunt cap.(C11) and the input pin of BT331 _ 1.5 mm. Distance between the center of the shunt cap.(C12) and the output pin of BT331 _ 2.25 mm. BeRex ● website: www.berex.com ● email: sales@berex.com 7 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT331 700-2700 MHz 1.5~2.0W Power Amplifier Typical Performance Preliminary Datasheet BeRex ● website: www.berex.com ● email: sales@berex.com 8 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT331 700-2700 MHz 1.5~2.0W Power Amplifier Typical Performance Preliminary Datasheet BeRex ● website: www.berex.com ● email: sales@berex.com 9 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT331 700-2700 MHz 1.5~2.0W Power Amplifier Application Circuit: 2140 MHz Schematic Diagram C1 C2 C3 C4 C5 C6 C7 C8 C9 C10 C11 C12 C13 L1 R1 R2 BOM 1608 1608 1608 1608 1608 3216 1608 1608 1608 1608 1608 1608 1608 1608 100pF 100pF 100pF 1nF 1uF 10uF NC 5pF NC 1.8pF 0.5pF 2pF 2pF 22nH 5.6KΩ 100Ω Tolerance Preliminary Datasheet R1 C7 C6 R2 C3 C4 C5 Vcc C9 C8 1 8 7 ±5% ±5% ±5% ±5% ±5% ±20% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% L1 RF_OUT C1 RF_IN C13 C10 C11 2 3 4 6 5 C2 C12 PCB Diagram Notice 1. 2. 3. 4. 5. PCB: 31mil thick FR4 Distance between the center of the shunt cap.(C13) and the input pin of BT331 _ 5.25 mm. Distance between the center of the series cap.(C10) and the input pin of BT331 _ 2.8mm. Distance between the center of the shunt cap.(C11) and the input pin of BT331 _ 1.5 mm. Distance between the center of the shunt cap.(C12) and the output pin of BT331 _ 2.25 mm. BeRex ● website: www.berex.com ● email: sales@berex.com 10 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT331 700-2700 MHz 1.5~2.0W Power Amplifier Typical Performance Preliminary Datasheet BeRex ● website: www.berex.com ● email: sales@berex.com 11 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT331 700-2700 MHz 1.5~2.0W Power Amplifier Typical Performance Preliminary Datasheet BeRex ● website: www.berex.com ● email: sales@berex.com 12 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT331 700-2700 MHz 1.5~2.0W Power Amplifier Application Circuit: 2450 MHz Schematic Diagram C1 C2 C3 C4 C5 C6 C7 C8 C9 C10 C11 C12 C13 L1 R1 R2 BOM 1608 1608 1608 1608 1608 3216 100pF 100pF 100pF 1nF 1uF 10uF NC NC NC 1pF 0.5pF 1.8pF 1pF 5.7nH 5.6KΩ 100Ω Tolerance Preliminary Datasheet R1 C7 C6 R2 C3 C4 C5 Vcc C9 C8 1 8 7 ±5% ±5% ±5% ±5% ±5% ±20% L1 RF_OUT C1 RF_IN C13 C10 C11 2 3 4 6 5 C2 C12 1608 1608 1608 1608 1608 1608 1608 ±5% ±5% ±5% ±5% ±5% ±5% ±5% PCB Diagram Notice 1. 2. 3. 4. 5. PCB: 31mil thick FR4 Distance between the center of the shunt cap.(C13) and the input pin of BT331 _ 6.0 mm. Distance between the center of the series cap.(C10) and the input pin of BT331 _ 2.8mm. Distance between the center of the shunt cap.(C11) and the input pin of BT331 _ 1.5 mm. Distance between the center of the shunt cap.(C12) and the output pin of BT331 _ 2.5 mm. BeRex ● website: www.berex.com ● email: sales@berex.com 13 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT331 700-2700 MHz 1.5~2.0W Power Amplifier Typical Performance Preliminary Datasheet BeRex ● website: www.berex.com ● email: sales@berex.com 14 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT331 700-2700 MHz 1.5~2.0W Power Amplifier Typical Performance Preliminary Datasheet BeRex ● website: www.berex.com ● email: sales@berex.com 15 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT331 700-2700 MHz 1.5~2.0W Power Amplifier Application Circuit: 2600 MHz Schematic Diagram C1 C2 C3 C4 C5 C6 C7 C8 C9 C10 C11 C12 C13 L1 R1 R2 BOM 1608 1608 1608 1608 1608 3216 1608 1608 1608 1608 1608 1608 1608 1608 1608 100pF 100pF 100pF 1nF 1uF 10uF NC 5pF 2.5pF 1pF 0.5pF 1.8pF 1pF 5.7nH 5.6KΩ 100Ω Tolerance Preliminary Datasheet R1 C7 C6 R2 C3 C4 C5 Vcc C9 C8 1 8 7 ±5% ±5% ±5% ±5% ±5% ±20% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% L1 RF_OUT C1 RF_IN C13 C10 C11 2 3 4 6 5 C2 C12 PCB Diagram Notice 1. 2. 3. 4. 5. PCB: 31mil thick FR4 Distance between the center of the shunt cap.(C13) and the input pin of BT331 _ 5.25 mm. Distance between the center of the series cap.(C10) and the input pin of BT331 _ 2.8mm. Distance between the center of the shunt cap.(C11) and the input pin of BT331 _ 1.5 mm. Distance between the center of the shunt cap.(C12) and the output pin of BT331 _ 1.5 mm. BeRex ● website: www.berex.com ● email: sales@berex.com 16 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT331 700-2700 MHz 1.5~2.0W Power Amplifier Typical Performance Preliminary Datasheet BeRex ● website: www.berex.com ● email: sales@berex.com 17 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT331 700-2700 MHz 1.5~2.0W Power Amplifier Typical Performance Preliminary Datasheet BeRex ● website: www.berex.com ● email: sales@berex.com 18 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT331 700-2700 MHz 1.5~2.0W Power Amplifier Package Outline Dimension Preliminary Datasheet BeRex ● website: www.berex.com ● email: sales@berex.com 19 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT331 700-2700 MHz 1.5~2.0W Power Amplifier Suggested PCB Land Pattern and PAD Layout PCB Land Pattern PCB Mounting Preliminary Datasheet Note : All dimension are in millimeters PCB lay out _ on BeRex website Lead plating finish 100% Tin Matte finish (All BeRex products undergoes a 1 hour, 150 degree C, Anneal bake to eliminate thin whisker growth concerns.) MSL / ESD Rating ESD Rating: Value: Test: Standard: Class 2 Passes