BL-LS0603LRC

SMD LED LAMP BL-LS0603XX Features: 1.6mmx0.8mm SMD, 0.8mm THICKNESS Mono-color type Compatible with automatic placement equipment WIDE VIEWING ANGLE. IDEAL FOR BACKLIGHT AND INDICATOR. PACKAGE: 4KPCS/REEL RoHs Compliance Electrical-optical characteristics: (Ta=25° C) Chip Part Number Emitted Color Material (Test Condition: IF=20mA) λP (nm) Lens Type Forward Voltage(VF) Unit:V BL-LS0603HC BL-LS0603SRC BL-LS0603LRC BL-LS0603URC BL-LS0603EC BL-LS0603YC BL-LS0603GC Red Super Red Super Red Ultra Red Orange Yellow Green GaP AlGaAs AlGaAs Absolute maximum ratings (Ta=25° C) Parameter H 30 65 5 100 w . w w AlGaAs GaAsP GaAsP GaP lu t e b 700 660 660 660 Water Clear 640 583 568 . x Typ 2.2 1.85 1.85 1.95 2.10 2.15 2.30 Max 2.7 m o c Min. 0.3 5 10 20 1 1 6 Typ. 1.0 13 28 45 6 6 15 Luminous Intensity (Iv) Unit:mcd Viewi ng Angle 2θ1/2 (deg) 2.30 2.30 2.50 2.70 2.70 2.70 130 SR 30 78 5 100 LR 30 78 5 100 UR 30 78 5 100 -30 to +80 -40 to +85 E 30 65 5 100 Y 30 65 5 100 G 30 65 5 100 Unit mA mW V mA TSOL APPROVED : XU L CHECKED :ZHANG WH DRAWN: LI FS REV NO: V.2 Page 1 of 5 WWW.BETLUX.COM EMAIL: SALES@BETLUX.COM , BETLUX@BETLUX.COM ¢ for 3 sec Max. Max.260 5 (1.6mm from the base of the epoxy bulb) ¢ ¡ Lead Soldering Temperature     Forward Current IF Power Dissipation Pd Reverse Voltage VR Peak Forward Current IPF (Duty 1/10 @1KHZ) Operation Temperature TOPR Storage Temperature TSTG SMD LED LAMP BL-LS0603XX Electrical-optical characteristics: (Ta=25° C) Chip Part Number Emitted Color Material (Test Condition: IF=20mA) Luminous Intensity (Iv) Unit:mcd λP (n m) Lens Type Forward Voltage(VF) Unit:V Viewi ng Angle 2θ1/2 (deg) Typ BL-LS0603UDR BL-LS0603UHR BL-LS0603UEC BL-LS0603UHD BL-LS0603UYO BL-LS0603UYC BL-LS0603UGC BL-LS0603PGC BL-LS0603BGC BL-LS0603DNB BL-LS0603UBC BL-LS0603UWC Ultra Red Ultra Red Ultra Orange Ultra Orange Ultra Amber Ultra Yellow Ultra Green Ultra Pure Green Ultra Bluish Green Blue Ultra Blue AlGaAs AlGaAs AlGaAs AlGaAs AlGaInP AlGaInP AlGaInP InGaN InGaN 655 645 630 618 610 593 575 525 Water Clear 2.10 2.10 2.10 2.10 2.10 2.10 2.20 3.50 3.50 3.50 3.50 3.50 Max 2.50 2.60 2.50 2.60 Min. 22 30 30 50 Typ. 55 80 80 110 80 70 2.60 2.60 2.70 4.20 4.20 4.20 4.20 4.20 InGaN InGaN Absolute maximum ratings (Ta=25° C) Parameter -30 to +80 -40 to +85 Max.260 5 for 3 sec Max. (1.6mm from the base of the epoxy bulb) TSOL APPROVED : XU L CHECKED :ZHANG WH DRAWN: LI FS REV NO: V.2 Page 2 of 5 WWW.BETLUX.COM EMAIL: SALES@BETLUX.COM , BETLUX@BETLUX.COM ¢ ¢ ¡ Lead Soldering Temperature     Forward Current IF Power Dissipation Pd Reverse Voltage VR Peak Forward Current IPF (Duty 1/10 @1KHZ) Operation Temperature TOPR Storage Temperature TSTG w . w w Ultra White UDR UHR InGaN lu t e b 505 470 470 / UE UHD UYO UY . x UG PG m o c 30 25 10 50 50 10 10 40 40 100 110 33 30 200 BG DNB UB UW 130 Unit 30 78 5 100 30 78 5 100 30 78 5 100 30 78 5 100 30 78 5 100 30 78 5 100 30 78 5 100 30 78 5 100 30 78 5 100 30 78 5 100 30 78 5 100 30 78 5 100 mA mW V mA SMD LED LAMP BL-LS0603XX Notes: 1. All dimensions are in millimeters (inches) 2. Tolerance is 0.25(0.01")unless otherwise noted. 3. Specifications are subject to change without notice. APPROVED : XU L CHECKED :ZHANG WH DRAWN: LI FS REV NO: V.2 Page 3 of 5 WWW.BETLUX.COM EMAIL: SALES@BETLUX.COM , BETLUX@BETLUX.COM ¤ £ Package configuration & Internal circuit diagram w . w w lu t e b . x m o c              SMD LED LAMP BL-LS0603XX Tape Specifications Unit：mm Tolerance：±0.1 m o c      7                APPROVED : XU L CHECKED :ZHANG WH DRAWN: LI FS REV NO: V.2 Page 4 of 5 WWW.BETLUX.COM EMAIL: SALES@BETLUX.COM , BETLUX@BETLUX.COM V Y S R S Q Y X W VS U T S R Q P I H G F @ § ¦A § B C D§ 8 9 ¥ ¨ ¦8 §                  ¦¥ § § ¨ ¦ §       © §                       . w w a`b lu t e b 8 ¦E B ¨ ¦§ B         w 6 5( 4 3 2 1 0) ( ' # & % # ! # $ #" ! . x SMD LED LAMP BL-LS0603XX 1 .0 0.5 0 350 (1) - GaAsP/GaAs 655nm/Red (2) - GaP 570nm/Yellow Green (3) - GaAsP/GaP 585nm/Yellow (4) - GaAsp/GaP 635nm/Orange & Hi-Eff Red (5) - GaP 700nm/Bright Red (6) - GaAlAs/GaAs 660nm/Super Red (8) - GaAsP/GaP 610nm/Super Red (9) - GaAlAs 880nm (10) - GaAs/GaAs & GaAlAs/GaAs 940nm (A) - GaN/SiC 430nm/Blue (B) - InGaN/SiC 470nm/Blue (C) - InGaN/SiC 505nm/Ultra Green (D) - InGaAl/SiC 525nm/Ultra Green 50 FORWARD CURRENT(mA) RELATIVE LUMINOUS INTENSITY 3 2 1 0.5 0.2 0.1 -30 -20 -10 1 8 64 5 23 4.0 40 30 20 10 0 1.2 3.0 1.6 2.0 2.4 2.6 FORWARD VOLTAGE (Vf) FORWARD CURRENT VS. FORWARD VOLTAGE w 0 10 FORWARD CURRENT (mA) RELATIVE LUMINOUS INTENSITY VS. FORWARD CURRENT AMBIENT TEMPERATURE Ta( ) FORWARD CURRENT VS. AMBIENT TEMPERATURE 1 5 4 2 3 10 9 8 7 6 5 4 3 2 20 30 40 50 60 70 1 AMBIENT TEMPERATURE Ta( ) 1 Ipeak MAX. IDC MAX. 300KHz 3KHz 10KHz 1KHz 100KHz F-REFRESH RATE 3KHz 300Hz 30KHz 100KHz 10KHz 1KHz 100Hz 10 9 8 7 6 5 Ipeak MAX. IDC MAX. 4 3 2 1 1 10 100 1000 tp-PULSE DURATION uS (5) 10 100 1000 10,000 tp-PULSE DURATION uS (1,2,3,4,6,8,B.D.J.K) NOTE:25 free air temperature unless otherwise specified APPROVED : XU L CHECKED :ZHANG WH DRAWN: LI FS REV NO: V.2 Page 5 of 5 WWW.BETLUX.COM EMAIL: SALES@BETLUX.COM , BETLUX@BETLUX.COM d e .b w w 2.0 1.0 0 3.0 20 40 60 lu t 1 5 B 100 80 e c e £ Typical electrical-optical characteristics curves: (A) (B) (C) (D) (2) (3) (8) (4) (1) (6) (5) (9) (10) 400 450 500 550 600 650 700 750 800 850 900 950 1000 Wavelength(nm) RELATIVE INTENSITY Vs WAVELENGTH( p ) . x 50 40 30 20 10 0 FORWARD CURRENT(mA) m o c 20 40 60 80 100 RELATIVE LUMINOUS INTENSITY 1 6 2,4,8,A 3 5 10,000