BL-LS0805HHC

SMD LED LAMP BL-LS0805HXX Features: 2.0mmx1.25mm SMD, 1.1mm THICKNESS Mono-color type Compatible with automatic placement equipment WIDE VIEWING ANGLE. IDEAL FOR BACKLIGHT AND INDICATOR. PACKAGE: 3KPCS/REEL RoHs Compliance Electrical-optical characteristics: (Ta=25° C) Chip Part Number Emitted Color Material (Test Condition: IF=20mA) λP (nm) Lens Type Forward Voltage(VF) Unit:V BL-LS0805HHC BL-LS0805HSRC BL-LS0805HLRC BL-LS0805HURC BL-LS0805HEC BL-LS0805HYC BL-LS0805HGC Red Super Red Super Red Ultra Red Orange Yellow Green GaP AlGaAs AlGaAs Absolute maximum ratings (Ta=25° C) Parameter H 30 65 5 100 w . w w AlGaAs GaAsP GaAsP GaP lu t e b 700 660 660 660 Water Clear 640 583 568 . x Typ 2.2 1.85 1.85 1.95 2.10 2.15 2.30 Max 2.7 m o c Min. 0.2 5 10 20 1 1 6 Typ. 0.9 13 28 45 6 6 15 Luminous Intensity (Iv) Unit:mcd Viewi ng Angle 2θ1/2 (deg) 2.30 2.30 2.50 2.70 2.70 2.70 130 SR 30 78 5 100 LR 30 78 5 100 UR 30 78 5 100 -30 to +80 -40 to +85 E 30 65 5 100 Y 30 65 5 100 G 30 65 5 100 Unit mA mW V mA TSOL Electrical-optical characteristics: (Ta=25° C) (Test Condition: IF=20mA) APPROVED : XU L CHECKED :ZHANG WH DRAWN: LI FS REV NO: V.2 Page 1 of 5 WWW.BETLUX.COM EMAIL: SALES@BETLUX.COM , BETLUX@BETLUX.COM ¢ for 3 sec Max. Max.260 5 (1.6mm from the base of the epoxy bulb) ¢ ¡ Lead Soldering Temperature     Forward Current IF Power Dissipation Pd Reverse Voltage VR Peak Forward Current IPF (Duty 1/10 @1KHZ) Operation Temperature TOPR Storage Temperature TSTG SMD LED LAMP BL-LS0805HXX Chip Part Number Emitted Color Material λP (n m) Lens Type Forward Voltage(VF) Unit:V Luminous Intensity (Iv) Unit:mcd Viewi ng Angle 2θ1/2 (deg) Typ BL-LS0805HUDR BL-LS0805HUHR BL-LS0805HUEC BL-LS0805HUHD BL-LS0805HUYO BL-LS0805HUYC BL-LS0805HUGC BL-LS0805HPGC BL-LS0805HBGC BL-LS0805HDNB BL-LS0805HUBC BL-LS0805HUWC Ultra Red Ultra Red Ultra Orange Ultra Orange Ultra Amber Ultra Yellow Ultra Green Ultra Pure Green Ultra Bluish Green Blue Ultra Blue AlGaAs AlGaAs AlGaAs AlGaAs AlGaInP AlGaInP AlGaInP InGaN InGaN InGaN InGaN 655 645 630 618 610 593 575 525 Water Clear 2.10 2.10 2.10 2.10 2.10 2.10 2.20 3.50 3.50 3.50 3.50 3.50 Max 2.50 2.60 2.50 2.60 2.60 2.60 2.70 4.20 4.20 4.20 Min. 22 30 30 50 30 25 Typ. 55 80 70 110 70 75 Absolute maximum ratings (Ta=25° C) Parameter UDR UHR -30 to +80 -40 to +85 Max.260 5 for 3 sec Max. (1.6mm from the base of the epoxy bulb) TSOL APPROVED : XU L CHECKED :ZHANG WH DRAWN: LI FS REV NO: V.2 Page 2 of 5 WWW.BETLUX.COM EMAIL: SALES@BETLUX.COM , BETLUX@BETLUX.COM ¢ ¢ ¡ Lead Soldering Temperature     Forward Current IF Power Dissipation Pd Reverse Voltage VR Peak Forward Current IPF (Duty 1/10 @1KHZ) Operation Temperature TOPR Storage Temperature TSTG w e .b w w Ultra White InGaN UE UHD lu t 470 470 / UYO UY 505 . x UG PG m o c 10 50 50 10 45 100 110 38 10 40 30 210 BG DNB UB UW 130 4.20 4.20 Unit 30 78 5 30 78 5 30 78 5 30 78 5 30 78 5 100 30 78 5 100 30 78 5 100 30 78 5 100 30 78 5 100 30 78 5 100 30 78 5 100 30 78 5 100 mA mW V mA 100 100 100 100 SMD LED LAMP BL-LS0805HXX Notes: 1. All dimensions are in millimeters (inches) 2. Tolerance is 0.25(0.01")unless otherwise noted. 3. Specifications are subject to change without notice. APPROVED : XU L CHECKED :ZHANG WH DRAWN: LI FS REV NO: V.2 Page 3 of 5 WWW.BETLUX.COM EMAIL: SALES@BETLUX.COM , BETLUX@BETLUX.COM ¤ £ Package configuration & Internal circuit diagram w . w w lu t e b . x m o c             E         SMD LED LAMP BL-LS0805HXX Tape Specifications Unit：mm Tolerance：±0.1 m o c      6          APPROVED : XU L CHECKED :ZHANG WH DRAWN: LI FS REV NO: V.2 Page 4 of 5 WWW.BETLUX.COM EMAIL: SALES@BETLUX.COM , BETLUX@BETLUX.COM V YS R S Q Y X W VS UT S R Q P I H G F 9 § ¦@ § A B C§ 7 8 ¥ ¨ ¦7 §               ¦¥ § § ¨ ¦ §         © §                         . w w a`b lu t e b 7 ¦D A ¨ ¦§ A         w 5 4 ' 3 2 1 0 )( ' & " % $ " " # " !  . x SMD LED LAMP BL-LS0805HXX 1 .0 0.5 0 350 (1) - GaAsP/GaAs 655nm/Red (2) - GaP 570nm/Yellow Green (3) - GaAsP/GaP 585nm/Yellow (4) - GaAsp/GaP 635nm/Orange & Hi-Eff Red (5) - GaP 700nm/Bright Red (6) - GaAlAs/GaAs 660nm/Super Red (8) - GaAsP/GaP 610nm/Super Red (9) - GaAlAs 880nm (10) - GaAs/GaAs & GaAlAs/GaAs 940nm (A) - GaN/SiC 430nm/Blue (B) - InGaN/SiC 470nm/Blue (C) - InGaN/SiC 505nm/Ultra Green (D) - InGaAl/SiC 525nm/Ultra Green 50 FORWARD CURRENT(mA) RELATIVE LUMINOUS INTENSITY 3 2 1 0.5 0.2 0.1 -30 -20 -10 1 8 64 5 23 4.0 40 30 20 10 0 1.2 3.0 1.6 2.0 2.4 2.6 FORWARD VOLTAGE (Vf) FORWARD CURRENT VS. FORWARD VOLTAGE w 0 10 FORWARD CURRENT (mA) RELATIVE LUMINOUS INTENSITY VS. FORWARD CURRENT AMBIENT TEMPERATURE Ta( ) FORWARD CURRENT VS. AMBIENT TEMPERATURE 1 5 4 2 3 10 9 8 7 6 5 4 3 2 20 30 40 50 60 70 1 AMBIENT TEMPERATURE Ta( ) 1 Ipeak MAX. IDC MAX. 300KHz 3KHz 10KHz 1KHz 100KHz F-REFRESH RATE 3KHz 300Hz 30KHz 100KHz 10KHz 1KHz 100Hz 10 9 8 7 6 5 Ipeak MAX. IDC MAX. 4 3 2 1 1 10 100 1000 tp-PULSE DURATION uS (5) 10 100 1000 10,000 tp-PULSE DURATION uS (1,2,3,4,6,8,B.D.J.K) NOTE:25 free air temperature unless otherwise specified APPROVED : XU L CHECKED :ZHANG WH DRAWN: LI FS REV NO: V.2 Page 5 of 5 WWW.BETLUX.COM EMAIL: SALES@BETLUX.COM , BETLUX@BETLUX.COM d e .b w w 2.0 1.0 0 3.0 20 40 60 lu t 1 5 B 100 80 e c e £ Typical electrical-optical characteristics curves: (A) (B) (C) (D) (2) (3) (8) (4) (1) (6) (5) (9) (10) 400 450 500 550 600 650 700 750 800 850 900 950 1000 Wavelength(nm) RELATIVE INTENSITY Vs WAVELENGTH( p ) . x 50 40 30 20 10 0 FORWARD CURRENT(mA) m o c 20 40 60 80 100 RELATIVE LUMINOUS INTENSITY 1 6 2,4,8,A 3 5 10,000