BL-LS1206VGC

SMD LED LAMP BL-LS1206Vxx Features: 3.2mmx1.6mm SMD, 1.1mm THICKNESS Mono-color type Compatible with automatic placement equipment WIDE VIEWING ANGLE. IDEAL FOR BACKLIGHT AND INDICATOR. PACKAGE: 3KPCS/REEL RoHs Compliance Electrical-optical characteristics: (Ta=25° C) Chip Part Number Emitted Color Material (Test Condition: IF=20mA) λP (nm) Lens Type Forward Voltage(VF) Unit:V BL-LS1206VHC BL-LS1206VSRC BL-LS1206VLRC BL-LS1206VURC BL-LS1206VEC BL-LS1206VYC BL-LS1206VGC Red Super Red Super Red Ultra Red Orange Yellow Green GaP AlGaAs AlGaAs Absolute maximum ratings (Ta=25° C) Parameter H 30 65 5 100 w . w w AlGaAs GaAsP GaAsP GaP lu t e b 700 660 660 660 Water Clear 640 583 568 . x Typ 2.2 1.85 1.85 1.95 2.10 2.15 2.30 Max 2.7 m o c Min. 0.3 20 45 120 5 4 20 Typ. 2.1 75 110 200 11 16 40 Luminous Intensity (Iv) Unit:mcd Viewi ng Angle 2θ1/2 (deg) 2.30 2.30 2.50 2.70 2.70 2.70 30 SR 30 78 5 100 LR 30 78 5 100 UR 30 78 5 100 -30 to +80 -40 to +85 E 30 65 5 100 Y 30 65 5 100 G 30 65 5 100 Unit mA mW V mA TSOL APPROVED : XU L CHECKED :ZHANG WH DRAWN: LI FS REV NO: V.2 Page 1 of 5 WWW.BETLUX.COM EMAIL: SALES@BETLUX.COM , BETLUX@BETLUX.COM ¢ for 3 sec Max. Max.260 5 (1.6mm from the base of the epoxy bulb) ¢ ¡ Lead Soldering Temperature     Forward Current IF Power Dissipation Pd Reverse Voltage VR Peak Forward Current IPF (Duty 1/10 @1KHZ) Operation Temperature TOPR Storage Temperature TSTG SMD LED LAMP BL-LS1206Vxx Electrical-optical characteristics: (Ta=25° C) Chip Part Number Emitted Color Material (Test Condition: IF=20mA) Luminous Intensity (Iv) Unit:mcd λP (nm) Lens Type Forward Voltage(VF) Unit:V Viewi ng Angle 2θ1/2( deg) Typ BL-LS1206VUDR BL-LS1206VUHR BL-LS1206VUEC BL-LS1206VUHD BL-LS1206VUYO BL-LS1206VUYC BL-LS1206VUGC BL-LS1206VPGC BL-LS1206VBGC BL-LS1206VDNB BL-LS1206VUBC BL-LS1206VUWC Ultra Red Ultra Red Ultra Orange Ultra Orange Ultra Amber Ultra Yellow Ultra Green Ultra Pure Green Ultra Bluish Green Blue Ultra Blue AlGaAs AlGaAs AlGaAs AlGaAs AlGaInP AlGaInP AlGaInP InGaN InGaN 655 645 630 618 610 593 575 525 Water Clear 2.10 2.10 2.10 2.10 2.10 2.10 Max 2.50 2.60 2.50 2.60 Min. 100 120 150 250 Typ. 220 300 330 580 2.60 2.60 InGaN InGaN Absolute maximum ratings (Ta=25° C) Parameter w TSOL . w w Ultra White UDR UHR InGaN lu t e b 505 470 470 / UE UHD UYO UY . x 2.20 3.50 3.50 3.50 3.50 3.50 UG PG 2.70 4.20 4.20 m o c 200 370 120 60 270 130 100 280 220 30 55 200 400 90 125 400 BG DNB UB UW 30 4.20 4.20 4.20 Unit -30 to +80 -40 to +85 Max.260 5 for 3 sec Max. (1.6mm from the base of the epoxy bulb) APPROVED : XU L CHECKED :ZHANG WH DRAWN: LI FS REV NO: V.2 Page 2 of 5 WWW.BETLUX.COM EMAIL: SALES@BETLUX.COM , BETLUX@BETLUX.COM ¢ ¢ ¡ Lead Soldering Temperature     Forward Current IF Power Dissipation Pd Reverse Voltage VR Peak Forward Current IPF (Duty 1/10 @1KHZ) Operation Temperature TOPR Storage Temperature TSTG 30 78 5 100 30 78 5 100 30 78 5 100 30 78 5 100 30 78 5 100 30 78 5 100 30 78 5 100 30 78 5 100 30 78 5 100 30 78 5 100 30 78 5 100 30 78 5 100 mA mW V mA SMD LED LAMP BL-LS1206Vxx Notes: 1. All dimensions are in millimeters (inches) 2. Tolerance is 0.25(0.01")unless otherwise noted. 3. Specifications are subject to change without notice. APPROVED : XU L CHECKED :ZHANG WH DRAWN: LI FS REV NO: V.2 Page 3 of 5 WWW.BETLUX.COM EMAIL: SALES@BETLUX.COM , BETLUX@BETLUX.COM ¤ £ Package configuration & Internal circuit diagram w . w w lu t e b . x m o c  ¥ ¦ § ¨ § ¦ ¥  ¦ §¨ §¦ E §¥ ¦ § ¨ §  ¦  SMD LED LAMP BL-LS1206Vxx Tape Specifications Unit：mm Tolerance：±0.1 m o c §¥ ¦ § ¨ §  ¦ ¥ ¥ § ¦ § ¨ § §¦¥ §¥ ¦ § ¨ §  ¦ ¥  ©       §¦ §¨ §  ¦     §¦ §¨ § §¦  §¥ ¦ § ¨ § § ¦   §¦ §¨   ¦ § §¥ ¦ § ¨   ¦ ¥ . w w lu t e b 7 D A   A APPROVED : XU L CHECKED :ZHANG WH DRAWN: LI FS REV NO: V.2 Page 4 of 5 WWW.BETLUX.COM EMAIL: SALES@BETLUX.COM , BETLUX@BETLUX.COM V Y S R S Q Y X W VS U T S R Q P I H G F 9  @  A B C 7 8 ©  7  a`b §¥ ¦ § ¨ § § ¦  w 6 5 ( 4 3 2 1 0) ( ' # &%# ! #$#"! . x SMD LED LAMP BL-LS1206Vxx 1 .0 0.5 0 350 (1) - GaAsP/GaAs 655nm/Red (2) - GaP 570nm/Yellow Green (3) - GaAsP/GaP 585nm/Yellow (4) - GaAsp/GaP 635nm/Orange & Hi-Eff Red (5) - GaP 700nm/Bright Red (6) - GaAlAs/GaAs 660nm/Super Red (8) - GaAsP/GaP 610nm/Super Red (9) - GaAlAs 880nm (10) - GaAs/GaAs & GaAlAs/GaAs 940nm (A) - GaN/SiC 430nm/Blue (B) - InGaN/SiC 470nm/Blue (C) - InGaN/SiC 505nm/Ultra Green (D) - InGaAl/SiC 525nm/Ultra Green 50 FORWARD CURRENT(mA) RELATIVE LUMINOUS INTENSITY 3 2 1 0.5 0.2 0.1 -30 -20 -10 1 8 64 5 23 4.0 40 30 20 10 0 1.2 3.0 1.6 2.0 2.4 2.6 FORWARD VOLTAGE (Vf) FORWARD CURRENT VS. FORWARD VOLTAGE w 0 10 FORWARD CURRENT (mA) RELATIVE LUMINOUS INTENSITY VS. FORWARD CURRENT AMBIENT TEMPERATURE Ta( ) FORWARD CURRENT VS. AMBIENT TEMPERATURE 1 5 4 2 3 10 9 8 7 6 5 4 3 2 20 30 40 50 60 70 1 AMBIENT TEMPERATURE Ta( ) 1 Ipeak MAX. IDC MAX. 300KHz 3KHz 10KHz 1KHz 100KHz F-REFRESH RATE 3KHz 300Hz 30KHz 100KHz 10KHz 1KHz 100Hz 10 9 8 7 6 5 Ipeak MAX. IDC MAX. 4 3 2 1 1 10 100 1000 tp-PULSE DURATION uS (5) 10 100 1000 10,000 tp-PULSE DURATION uS (1,2,3,4,6,8,B.D.J.K) NOTE:25 free air temperature unless otherwise specified APPROVED : XU L CHECKED :ZHANG WH DRAWN: LI FS REV NO: V.2 Page 5 of 5 WWW.BETLUX.COM EMAIL: SALES@BETLUX.COM , BETLUX@BETLUX.COM d e .b w w 2.0 1.0 0 3.0 20 40 60 lu t 1 5 B 100 80 e c e £ Typical electrical-optical characteristics curves: (A) (B) (C) (D) (2) (3) (8) (4) (1) (6) (5) (9) (10) 400 450 500 550 600 650 700 750 800 850 900 950 1000 Wavelength(nm) RELATIVE INTENSITY Vs WAVELENGTH( p ) . x 50 40 30 20 10 0 FORWARD CURRENT(mA) m o c 20 40 60 80 100 RELATIVE LUMINOUS INTENSITY 1 6 2,4,8,A 3 5 10,000