BL-LS1311IRCC

SMD INFRARED EMITTING DIODES BL-LS1311IR Features: 3.5mmx2.8mm SMD, 1.9mm THICKNESS PLCC2 package, Infrared LED High Reliability Peak Wavelength at 940, 880, 850nm Water Clear, yellow Transparent, Blue Transparent available IC compatible /Low current capability. PACKAGE: 2KPCS/REEL. RoHs Compliance Part Number Material λP (nm) Storage Temperature TSTG Lead Soldering Temperature TSOL -40 to +100 Max.260 5 for 3 sec Max. (1.6mm from the base of the epoxy bulb) APPROVED : XU L CHECKED :ZHANG WH DRAWN: LI FS REV NO: V.2 Page 1 of 3 WWW.BETLUX.COM EMAIL: SALES@BETLUX.COM , BETLUX@BETLUX.COM ¡ ¡ ¡ Forward Current IF Power Dissipation Pd Reverse Voltage VR Peak Forward Current IPF (Duty 1/10 @1KHZ) Operation Temperature TOPR £¢   Applications: Free air transmission system Infrared remote control units with high power requirement Smoke detector Infrared Camera Infrared applied system Electrical-optical characteristics: (Ta=25° C) Chip (Test Condition: IF=50mA) Lens Type ∆λ BL-LS1311IRAC BL-LS1311IRAB BL-LS1311IRBC BL-LS1311IRBB BL-LS1311IRCC BL-LS1311IRCB BL-LS1311IRCY GaAs GaAs GaAlAs GaAlAs GaAlAs GaAlAs GaAlAs Absolute maximum ratings (Ta=25° C) Parameter Rating 50 160 5 250 -40 to +100 Unit mA mW V mA w e .b w w 940 940 Water Clear Blue Trans. 880 880 850 850 850 Water Clear Blue Trans. Water Clear Blue Trans. Yellow Trans. 50 50 lu t 10 10 10 10 10 10 10 Ir (Vr=5V, u A) . x Typ 1.40 1.40 1.70 1.70 1.70 1.70 1.70 Forward Voltage(VF) Unit:V m o c Radiant Power (mw/sr) Typ 30 30 30 30 50 50 50 Viewing Angle 2θ1/2(deg ) Max 1.60 1.60 2.00 2.00 2.00 2.00 2.00 50 50 120 50 50 50 SMD INFRARED EMITTING DIODES BL-LS1311IR Notes: 1. All dimensions are in millimeters (inches) 2. Tolerance is 0.25(0.01")unless otherwise noted. 3. Specifications are subject to change without notice. APPROVED : XU L CHECKED :ZHANG WH DRAWN: LI FS REV NO: V.2 Page 2 of 3 WWW.BETLUX.COM EMAIL: SALES@BETLUX.COM , BETLUX@BETLUX.COM ¥ ¤ Package configuration & Internal circuit diagram w . w w lu t e b . x m o c SMD INFRARED EMITTING DIODES BL-LS1311IR Tape Specifications w . w w lu t e b . x m o c APPROVED : XU L CHECKED :ZHANG WH DRAWN: LI FS REV NO: V.2 Page 3 of 3 WWW.BETLUX.COM EMAIL: SALES@BETLUX.COM , BETLUX@BETLUX.COM