BL-M07D881UE

LED DOT MATRIX BL-M07X881 n Ø Ø Ø Ø Ø Ø Features: 20.20mm (0.8” F1.9 dot matrix LED display. ) Low current operation. Excellent character appearance. Easy mounting on P.C. Boards or sockets. I.C. Compatible. ROHS Compliance. 　 Super Bright Electrical-optical characteristics: (Ta=25℃ ) Part No Row Cathode Column Anode BL-M07C881S-XX BL-M07C881D-XX BL-M07C881UR-XX BL-M07C881E-XX BL-M07C881Y-XX BL-M07C881G-XX Row Anode Column Cathode BL-M07D881S-XX BL-M07D881D-XX BL-M07D881UR-XX BL-M07D881E-XX BL-M07D881Y-XX BL-M07D881G-XX Emitted Color Hi Red Super Red Ultra Red Orange Yellow Green (Test Condition: IF=20mA) Chip Material GaAlAs/GaAs,SH GaAlAs/GaAs,DH GaAlAs/GaAs,DDH GaAsP/GaP GaAsP/GaP GaP/GaP λP (nm) 660 660 660 635 585 570 VF Unit:V Typ 1.85 1.85 1.85 2.10 2.10 2.20 Max 2.20 2.20 2.20 2.50 2.50 2.50 Iv TYP.(mcd) 200 320 400 190 190 195 Ultra Bright Electrical-optical characteristics: (Ta=25℃ ) Part No (Test Condition: IF=20mA) Chip VF Unit:V λP (nm) Iv Typ Max TYP.(mcd) Row Cathode Column Anode Row Anode Column Cathode Emitted Color Material BL-M07C881UHR-XX BL-M07C881UE-XX BL-M07C881YO-XX BL-M07C881UY-XX BL-M07C881UG-XX BL-M07C881PG-XX BL-M07C881B-XX BL-M07C881W-XX BL-M07D881UHR-XX BL-M07D881UE-XX BL-M07D881YO-XX BL-M07D881UY-XX BL-M07D881UG-XX BL-M07D881PG-XX BL-M07D881B-XX BL-M07D881W-XX Ultra Red Ultra Orange Ultra Amber Ultra Yellow Ultra Green Ultra Pure Green Ultra Blue Ultra White AlGaInP AlGaInP AlGaInP AlGaInP AlGaInP InGaN InGaN InGaN 645 630 619 590 574 525 470 / 2.10 2.10 2.10 2.10 2.20 3.80 2.70 2.70 2.50 2.50 2.50 2.50 2.50 4.50 4.20 4.20 400 235 235 235 250 270 180 280 · -XX: Surface / Lens color： 0 Number Ref Surface Color White Epoxy Color Water clear 1 Black White diffused 2 Gray Red Diffused 3 Red Green Diffused 4 Green Yellow Diffused 5 APPROVED : XU L CHECKED :ZHANG WH DRAWN: LI FS REV NO: V.2 Page 1 of 4 WWW.BETLUX.COM EMAIL: SALES@BETLUX.COM , BETLUX@BETLUX.COM LED DOT MATRIX BL-M07X881 Absolute maximum ratings (Ta=25℃ ) Parameter Forward Current I F Power Dissipation Pd Reverse Voltage VR Peak Forward Current IPF (Duty 1/10 @1KHZ) Operation Temperature TOPR Storage Temperature TSTG Lead Soldering Temperature T SOL S 25 60 5 150 D 25 60 5 150 UR 25 60 5 150 -40 to +80 -40 to +85 Max.260±5℃ for 3 sec Max. (1.6mm from the base of the epoxy bulb) E 25 60 5 150 Y 25 60 5 150 G 30 65 5 150 　 Unit mA mW V mA ℃ ℃ ℃ n Absolute maximum ratings (Ta=25° C) UHR 30 75 5 150 Parameter Forward Current I F Power Dissipation Pd Reverse Voltage VR Peak Forward Current IPF (Duty 1/10 @1KHZ) Operation Temperature TOPR Storage Temperature TSTG Lead Soldering Temperature T SOL UE 30 65 5 150 YO 30 65 5 150 UY 30 65 5 150 UG 30 75 5 150 PG 30 110 5 150 B 30 120 5 100 W 30 120 5 100 U nit mA mW V mA ℃ ℃ -40 to +80 -40 to +85 Ma x.260±5℃ for 3 sec Max. (1.6mm from the base of the epoxy bulb) ℃ APPROVED : XU L CHECKED :ZHANG WH DRAWN: LI FS REV NO: V.2 Page 2 of 4 WWW.BETLUX.COM EMAIL: SALES@BETLUX.COM , BETLUX@BETLUX.COM LED DOT MATRIX BL-M07X881 　 ■　 Package configuration & Internal circuit diagram Notes: 1. All dimensions are in millimeters (inches) 2. Tolerance is ±0.25(0.01")unless otherwise noted. 3. Specifications are subject to change without notice. APPROVED : XU L CHECKED :ZHANG WH DRAWN: LI FS REV NO: V.2 Page 3 of 4 WWW.BETLUX.COM EMAIL: SALES@BETLUX.COM , BETLUX@BETLUX.COM LED DOT MATRIX BL-M07X881 ■　 Typical electrical-optical characteristics curves: 1.0 (A) (B) (C) (D) (2) (3) (8) (4) (1) (6) (5) (9) (10) 　 0.5 0 350 400 450 500 550 600 650 700 750 800 850 900 950 1000 Wavelength(nm) RELATIVE INTENSITY Vs WAVELENGTH(λ p ) (1) - GaAsP/GaAs 655nm/Red (2) - GaP 570nm/Yellow Green (3) - GaAsP/GaP 585nm/Yellow (4) - GaAsp/GaP 635nm/Orange & Hi-Eff Red (5) - GaP 700nm/Bright Red (6) - GaAlAs/GaAs 660nm/Super Red (8) - GaAsP/GaP 610nm/Super Red (9) - GaAlAs 880nm (10) - GaAs/GaAs & GaAlAs/GaAs 940nm (A) - GaN/SiC 430nm/Blue (B) - InGaN/SiC 470nm/Blue (C) - InGaN/SiC 505nm/Ultra Green (D) - InGaAl/SiC 525nm/Ultra Green 50 FORWAR D C U RREN T(m A) REL ATIVE LUMIN OU S IN TENSITY 3 2 1 0.5 0.2 0.1 -30 -20 -10 1 8 64 5 23 4.0 1 3.0 FORWAR D CU RR EN T( m A) 50 40 30 20 10 0 R ELATIVE L UM IN OUS INTEN SITY 40 30 20 10 0 1.2 1 6 2,4,8,A 3 5 2.0 5 B 1.0 0 20 40 60 80 100 1.6 2.0 2.4 2.6 3.0 20 40 60 80 100 FORWARD VOLTAGE (Vf) FORWARD CURRENT VS. FORWARD VOLTAGE FORWARD CURRENT (mA) RELATIVE LUMINOUS INTENSITY VS. FORWARD CURRENT AMBIENT TEMPERATURE Ta(℃) FORWARD CURRENT VS. AMBIENT TEMPERATURE 1 5 4 2 3 3KHz 300KHz 1KHz 100KHz F-REFRESH RATE 10 10KHz 9 8 7 6 5 Ipeak M AX. IDC MAX. 4 3 2 0 10 20 30 40 50 60 70 1 AMBIENT TEMPERATURE Ta(℃ ) 1 10 100 1000 tp-PULSE DURATION uS (1,2,3,4,6,8,B.D.J.K) 10,000 Ipeak MAX. IDC MAX. 30KHz 3KHz 300Hz 100KHz 10KHz 1KHz 100Hz 10 9 8 7 6 5 4 3 2 1 1 10 100 1000 tp-PULSE DURATION uS (5) 10,000 NOTE:25℃ free air temperature unless otherwise specified APPROVED : XU L CHECKED :ZHANG WH DRAWN: LI FS REV NO: V.2 Page 4 of 4 WWW.BETLUX.COM EMAIL: SALES@BETLUX.COM , BETLUX@BETLUX.COM