BL-SE1600A-11D-2

LED NUMERIC DISPLAY, BIG SEGMENT DISPLAY BL-SE1600X-11 Super Bright Electrical-optical characteristics: (Ta=25 ) (Test Condition: IF=20mA) Part No Common Cathode BL-SE1600A-11S-XX BL-SE1600A-11D-XX BL-SE1600A-11UR-X X BL-SE1600A-11E-XX BL-SE1600A-11Y-XX BL-SE1600A-11G-XX Common Anode BL-SE1600B-11S-XX BL-SE1600B-11D-XX BL-SE1600B-11UR-X X BL-SE1600B-11E-XX BL-SE1600B-11Y-XX BL-SE1600B-11G-XX Emitte d Color Hi Red Super Red Ultra Red Orange Yellow Green Ultra Bright Electrical-optical characteristics: (Ta=25 ) (Test Condition: IF=20mA) Part No Common Cathode Common Anode BL-SE1600A-11UHR-X X BL-SE1600A-11UE-XX BL-SE1600A-11YO-XX BL-SE1600A-11UY-XX BL-SE1600A-11UG-XX BL-SE1600A-11PG-XX BL-SE1600A-11B-XX BL-SE1600A-11W-XX w e .b w w BL-SE1600B-11UHR-X X BL-SE1600B-11UE-XX BL-SE1600B-11YO-XX BL-SE1600B-11UY-XX BL-SE1600B-11UG-XX BL-SE1600B-11PG-XX BL-SE1600B-11B-XX BL-SE1600B-11W-XX APPROVED : XU L CHECKED :ZHANG WH DRAWN: LI FS REV NO: V.2 Page 1 of 4 WWW.BETLUX.COM EMAIL: SALES@BETLUX.COM , BETLUX@BETLUX.COM £ -XX: Surface / Lens color 0 Number Ref Surface Color White Epoxy Color Water clear 1 Black White diffused ¡ ¡ ¡ ¡ ¢ ¢ ¢ ¢   Features: 406.4mm (16.0”) numeric segment series, BIG SEGMENT DISPLAY Low current operation. Excellent character appearance. Easy mounting on P.C. Boards or sockets. I.C. Compatible. ROHS Compliance. Chip Material GaAlAs/GaAs,SH GaAlAs/GaAs,DH GaAlAs/GaAs,DDH GaAsP/GaP GaAsP/GaP GaP/GaP λP (nm) 660 660 660 VF Unit:V Typ 1.85 Max 2.20 Iv TYP.(mcd ) 200 lu t Chip InGaN InGaN InGaN . x 635 585 570 λP (nm) 645 630 619 590 574 525 470 / m o c 1.85 2.20 1.85 2.20 2.10 2.50 2.10 2.50 2.20 2.50 VF Unit:V Typ Max 2.10 2.10 2.10 2.10 2.20 3.80 2.70 2.70 2.50 2.50 2.50 2.50 2.50 4.50 4.20 4.20 225 250 200 170 210 Emitted Color Material AlGaInP AlGaInP AlGaInP AlGaInP AlGaInP Iv TYP.(mcd ) 250 Ultra Red Ultra Orange 210 210 210 225 250 230 230 Ultra Amber Ultra Yellow Ultra Green Ultra Pure Green Ultra Blue Ultra White 2 Gray Red Diffused 3 Red Green Diffused 4 Green Yellow Diffused 5 LED NUMERIC DISPLAY, BIG SEGMENT DISPLAY BL-SE1600X-11 Absolute maximum ratings (Ta=25 Parameter Forward Current IF Power Dissipation Pd Reverse Voltage VR Peak Forward Current IPF (Duty 1/10 @1KHZ) Operation Temperature TOPR Storage Temperature TSTG Lead Soldering Temperature TSOL -40 to +85 Max.260±5 for 3 sec Max. (1.6mm from the base of the epoxy bulb) Absolute maximum ratings (Ta=25° C) Parameter Forward Current IF Power Dissipation Pd Reverse Voltage VR Peak Forward Current IPF (Duty 1/10 @1KHZ) Operation Temperature TOPR Storage Temperature TSTG TSOL UHR 30 75 5 150 UE 30 65 5 YO 30 65 5 UY 30 65 5 Lead Soldering Temperature Max.260±5 for 3 sec Max. (1.6mm from the base of the epoxy bulb) w APPROVED : XU L CHECKED :ZHANG WH DRAWN: LI FS REV NO: V.2 Page 2 of 4 WWW.BETLUX.COM EMAIL: SALES@BETLUX.COM , BETLUX@BETLUX.COM ¦ . w w ¦ ¥ ¥ lu t e b 150 150 150 . x UG 30 75 5 150 PG m o c UB UW 30 110 5 30 120 5 30 120 5 150 100 100 Unit mA mW V mA -40 to +80 -40 to +85 ¤ ¤ ¤ ¤ ¡ ¡ ) D 25 60 5 150 25 60 5 150 UR 25 60 5 150 -40 to +80 E 25 60 5 150 Y 25 60 5 150 G 30 65 5 150 Unit mA mW V mA S LED NUMERIC DISPLAY, BIG SEGMENT DISPLAY BL-SE1600X-11 Notes: 1. All dimensions are in millimeters (inches) 2. Tolerance is 0.25(0.01")unless otherwise noted. 3. Specifications are subject to change without notice. APPROVED : XU L CHECKED :ZHANG WH DRAWN: LI FS REV NO: V.2 Page 3 of 4 WWW.BETLUX.COM EMAIL: SALES@BETLUX.COM , BETLUX@BETLUX.COM §   Package configuration & Internal circuit diagram w . w w lu t e b . x m o c LED NUMERIC DISPLAY, BIG SEGMENT DISPLAY BL-SE1600X-11 1 .0 0.5 0 350 Wavelength(nm) RELATIVE INTENSITY Vs WAVELENGTH( p ) (1) - GaAsP/GaAs 655nm/Red (2) - GaP 570nm/Yellow Green (3) - GaAsP/GaP 585nm/Yellow (4) - GaAsp/GaP 635nm/Orange & Hi-Eff Red (5) - GaP 700nm/Bright Red (6) - GaAlAs/GaAs 660nm/Super Red (8) - GaAsP/GaP 610nm/Super Red (9) - GaAlAs 880nm (10) - GaAs/GaAs & GaAlAs/GaAs 940nm (A) - GaN/SiC 430nm/Blue (B) - InGaN/SiC 470nm/Blue (C) - InGaN/SiC 505nm/Ultra Green (D) - InGaAl/SiC 525nm/Ultra Green 50 FORWARD CURRENT(mA) RELATIVE LUMINOUS INTENSITY 3 2 1 0.5 0.2 0.1 -30 -20 -10 1 8 64 5 23 4.0 40 30 20 10 0 1.2 3.0 1.6 2.0 2.4 2.6 FORWARD VOLTAGE (Vf) FORWARD CURRENT VS. FORWARD VOLTAGE w 0 10 FORWARD CURRENT (mA) RELATIVE LUMINOUS INTENSITY VS. FORWARD CURRENT AMBIENT TEMPERATURE Ta( ) FORWARD CURRENT VS. AMBIENT TEMPERATURE 1 5 4 2 3 10 9 8 7 6 5 4 3 2 20 30 40 50 60 70 1 1 Ipeak MAX. IDC MAX. 300KHz 3KHz 10KHz 1KHz 100KHz F-REFRESH RATE 3KHz 300Hz 30KHz 100KHz 10KHz 1KHz 100Hz 10 9 8 7 6 5 Ipeak MAX. IDC MAX. 4 3 2 1 1 10 100 1000 tp-PULSE DURATION uS (5) AMBIENT TEMPERATURE Ta( ) 10 100 1000 10,000 tp-PULSE DURATION uS (1,2,3,4,6,8,B.D.J.K) NOTE:25 free air temperature unless otherwise specified APPROVED : XU L CHECKED :ZHANG WH DRAWN: LI FS REV NO: V.2 Page 4 of 4 WWW.BETLUX.COM EMAIL: SALES@BETLUX.COM , BETLUX@BETLUX.COM © e .b w w 2.0 1.0 0 3.0 20 40 60 lu t 1 5 B 100 80  ¨    Typical electrical-optical characteristics curves: (A) (B) (C) (D) (2) (3) (8) (4) (1) (6) (5) (9) (10) 400 450 500 550 600 650 700 750 800 850 900 950 1000 . x 50 40 30 20 10 0 FORWARD CURRENT(mA) m o c 20 40 60 80 100 RELATIVE LUMINOUS INTENSITY 1 6 2,4,8,A 3 5 10,000