ER106

BL GALAXY ELECTRICAL SUPER FAST RECTIFIER FEATURES Low cost Low leakage Low forward voltage drop High current capability Easily cleaned with alcohol,Isopropanol and similar solvents The plastic material carries U/L recognition 94V-0 ER101 --- ER106 VOLTAGE RANGE: 100 --- 600 V CURRENT: 1.0 A DO - 41 MECHANICAL DATA Case:JEDEC DO--41,molded plastic Terminals: Axial lead ,solderable per MIL- STD-202,Method 208 Polarity: Color band denotes cathode Weight: 0.012 ounces,0.34 grams Mounting position: Any MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ambient temperature unless otherwise specified. Single phase,half wave,60 Hz,resistive or inductive load. For capacitive load,derate by 20%. ER101 Maximum recurrent peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forw ard rectified current 9.5mm lead length, @TA=75 ER102 200 140 200 ER103 300 210 300 1.0 ER104 400 280 400 ER106 600 420 600 UNITS V V V A VRRM VRMS VDC IF(AV) 100 70 100 Peak forw ard surge current 8.3ms single half-sine-w ave superimposed on rated load @TJ=125 Maximum instantaneous forw ard voltage @ 1.0A Maximum reverse current @TA=25 at rated DC blocking voltage @TA=100 Maximum reverse recovery time (Note 1) Typical junction capacitance Typical thermal resistance (Note 2) (Note 3) IFSM VF IR trr CJ RθJA TJ TSTG 0.95 30.0 A 1.25 5.0 150.0 35 22 50 - 55 ----- + 150 - 55 ----- + 150 1.7 V A ns pF ／Ｗ Operating junction temperature range Storage temperature range NOTE: 1. Measured with I F=0.5A, I R=1A, Irr=0.25A. www.galaxycn.com 2. Measured at 1.0MHz and applied rev erse v oltage of 4.0V DC. 3.Thermal resistance junction to ambient. Document Number 0264008 BLGALAXY ELECTRICAL 1. RATINGS AND CHARACTERISTIC CURVES 50 N 1. 10 N 1. trr ER101 --- ER106 FIG.1 -- TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTIC +0.5A 0 -0.25A D.U.T. (+) 25VDC (approx) (-) PULSE GENERATOR (NOTE2) 1 NONINDUCTIVE OSCILLOSCOPE (NOTE 1) -1.0A 1cm NOTES:1.RISE TIME = 7ns MAX.INPUT IMPEDANCE = 1M .22pF. JJJJJ2.RISE TIME =10ns MAX.SOURCE IMPEDANCE=50 . SET TIME BASE FOR 10/20 ns/cm FIG.2 -- TYPICAL FORWARD CHARACTERISTIC 2.0 FIG.3 -- FORWARD DERATING CURVE AVERAGE FORWARD CURRENT AMPERES 1.0 z INSTANTANEOUS FORWARD CURRENT, AMPERES ER103 ER104 1.0 ER101 - ER102 ER106 0.5 Single Phase Half Wave 60H Z Resistive or Inductive Load 0.375"(9.5mm)Lead length 0.1 TJ= 2 5 P uls e W idth= 3 0 0 µ s 0.01 0 0.4 0.8 1.2 1 .6 2.0 2.4 0 0 25 50 75 100 125 150 175 INSTANTANEOUS FORWARD VOLTAGE, VOLTS FIG.4 -- TYPICAL JUNCTION CAPACITANCE AMBIENT TEMPERATURE, FIG.5 -- PEAK FORWARD SURGE CURRENT JUNCTION CAPACITANCE,pF PEAK FORWARD SURGE CURRENT, AMPERES 100 60 40 20 10 6 4 2 1 TJ=25 f=1.0MHz 30 25 20 15 10 5 0 1 5 10 20 50 100 8.3ms Single Half Sine-Wave 0.1 0.2 0.4 1 2 4 10 20 40 100 REVERSE VOLTAGE,VOLTS FIG.6 -- TYPICAL REVERSE CHARACTERISTICS NUMBER OF CYCLES AT 60Hz INSTANTANEOUS REVERSE CURRENT, MICROAMPERES 1000 TJ=100 100 10 TJ=75 1.0 TJ=25 0.1 0 20 40 60 80 100 120 PERCENT OF RATED PEAK REVERSE VOLTAGE. www.galaxycn.com Document Number 0264008 BLGALAXY ELECTRICAL 2.