FR104G

BL FEATURES Low cost L ow leakage GALAXY ELECTRICAL FR101G --- FR107G VOLTAGE RANGE: 50 --- 1000 V CURRENT: 1.0 A GLASS PASSIVATED RECTIFIERS DO - 41 Glass passivated junction L ow forward voltage drop High current capability z Easily cleaned with alcohol,Isopropanol and similar solvents The plastic material carries U/L recognition 94V-0 Case:JEDEC DO-41,molded plastic Terminals: Axial lead ,solderable per MIL- STD-202,Method 208 Polarity: Color band denotes cathode Weight: 0.012 ounces,0.34 grams Mounting position: Any MECHANICAL DATA MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 a mbient temperature unless otherwise specified. Single phase,half wave,60 Hz,resistive or inductive load. For capacitive load,derate by 20%. FR101G FR102G FR103G FR104G FR105G FR106G FR107G UNITS Maximum recurrent peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forw ard rectified current 9.5mm lead length, @TA=75 VRRM VRMS VDC IF(AV) 50 35 50 100 70 100 200 140 200 400 280 400 1.0 600 420 600 800 560 800 1000 700 1000 V V V A Peak forw ard surge current 8.3ms single half-sine-w ave superimposed on rated load @TJ=125 IFSM 30.0 A Maximum instantaneous forw ard voltage at 1.0A Maximum reverse current @TA=25 (Note1) (Note2) (Note3) VF IR trr CJ RθJA TJ TSTG 150 1.3 5.0 100.0 250 12.0 55.0 - 55 ---- + 175 - 55 ---- +175 500 V A ns pF ／Ｗ at rated DC blocking voltage @TA=100 Maximum reverse recovery time Typical junction capacitance Typical thermal resistance Operating junction temperature range Storage temperature range NOTE: 1. Measured with I F =0.5A, I R=1A, I rr=0.25A. www.galaxycn.com 2. Measured at 1.0MHZ and applied rev erse v oltage of 4.0V DC. 3.Thermal resistance junction to ambient Document Number 0269005 BLGALAXY ELECTRICAL 1. RATINGS AND CHARACTERISTIC CURVES FR101G --- FR107G FIG.1 -- TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTIC 50 N 1. 10 N 1. trr +0.5A D.U.T. (+) 25VDC (approx) (-) PULSE GENERATOR (NOTE2) 0 -0.25A 1 NONINDUCTIVE OSCILLOSCOPE (NOTE 1) -1.0A 1cm NOTES:1.RISE TIME = 7ns MAX.INPUT IMPEDANCE =1M . 22pF. JJJJ 2.RISE TIME =10ns MAX.SOURCE IMPEDANCE=50 . SET TIME BASE FOR 50/100 ns/cm FIG.2 -- TYPICAL FORWARD CURRENT DERATING CURVE AVERAGE FORWARD RECTIFIED CURRENT 1.25 Single Phase Half Wave 60HZ Resistive or Inductive Load FIG.3 -- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS INSTANTANEOUS FORWARD CURRENT AMPERES 10 1.00 T J =25 Pulse Width=300 µ S 0.75 1.0 AMPERES 0.50 0.1 0.25 0 25 50 75 100 125 150 175 0.01 0 0.2 0.4 0.6 0.8 1 1 .2 1.4 1.6 1.8 2 AMBIENT TEMPERATURE, INSTANTANEOUS FORWARD VOLTAGE, VOLTS FIG.4 --PEAK FORWARD SURGE CURRENT 50 FIG.5 -- TYPICAL JUNCTION CAPACITANCE 200 100 PEAK FORWARD SURGE CURRENT 40 JUNCTION CAPACITANCE,pF 8.3ms Single Half Sine-Wave 60 40 20 10 6 4 2 1 0.1 0.2 TJ=25 30 AMPERES 20 10 0 1 5 10 50 100 0.4 1 2 4 10 20 40 100 NUMBER OF CYCLES AT 60Hz REVERSE VOLTAGE,VOLTS www.galaxycn.com Document Number 0269005 BLGALAXY ELECTRICAL 2.