MB4S

BL FEATURES GALAXY ELECTRICAL MB05S - - - MB10S VOLTAGE RANGE: 50 --- 1000 V CURRENT: 0.5 A SILICON BRIDGE RECTIFIERS This series is UL recognized under Component Index, file number E239431 Glass passivated chip junctions Plastic materrial has U/L flammability classification 94V-O High surge overload rating: 35A peak Saves space on printed circuit boards High temperature soldering guaranteed: 260°C/10 seconds at 5 lbs. (2.3kg) tension TO-269AA 4.6±0.2 Case: Molded plastic body over passivated junctions Terminals: Plated leads solderable per MIL-STD-750, Method 2026 Polarity: Polarity symbols marked on body Dimensions in inches and (millimeters) Mounting Position: Any Weight: 0.0078 ounce, 0.22 gram 3.8±0.2 2.5±0.2 0.6±0.1 2.5±0.25 1.0±0.15 6.8±0.2 0.3±0.1 Dimensions in millimeters MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS R atings at 25 ambient temperature unless otherwise specified. Single phase,half wave,60 Hz,resistive or inductive load. For capacitive load,derate by 20%. MB05S MB1S Maximum recurrent peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forw ard output current @TA=25 MB2S MB4S MB6S MB8S MB10S UNITS 200 140 200 400 280 400 0.5 1) V RRM V RMS V DC IF(AV) 1.2±0.2 MECHANICAL DATA 50 35 50 100 70 100 600 420 600 800 560 800 1000 700 1000 V V V A 0.82) 35.0 Peak forw ard surge current 8.3ms single half-sine-w ave superimposed on rated load Maximum instantaneous forw ard voltage @ 0.4 A Maximum reverse current at rated DC blocking voltage @TA=25 @TA=100 IFSM A VF IR CJ 1.0 5.0 0.5 13 V μA mA pF Typical junction capacitance per leg (NOTE 3) Typical thermal resistance per leg (NOTE 1) ( NOTE 2 ) Operating junction temperature range Storage temperature range R θJA RθJL TJ TSTG 85 20 - 55 ---- + 150 - 55 ---- + 150 /W NOTES: (1) On glass epoxy P.C.B. mounted on 0.05 x 0.05" (1.3 x 1.3mm) pads (2) On aluminum substrate P.C.B. with an area of 0.8" x 0.8" (20 x 20mm) mounted on 0.05 x 0.05" (1.3 x 1.3mm) solder pad (3) Measured at 1.0 MHz and applied rev erse v oltage of 4.0 Volts www.galaxycn.com Document Number 0287001 BLGALAXY ELECTRICAL 1. RATINGS AND CHARACTERISTIC CURVES MB05S - - - MB10S FIG.2 -- MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PER LEG AVERAGE FORWARD CURRENT, AMPERES FIG.1 -- DERATING CURVE FOR OUTPUT RRECTIFIED CURRENT PEAK FORWARD SURGE CURRENT, AMPERES 35 30 25 f=60Hz TＡ=４０ SINGLE HALF SINE-WAVE (JEDEC Method) 0.8 Aluminum Substrate 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 GLASS EPOXY P.C.B. 20 15 f=50Hz 10 5.0 0 1.0 CYCLE 1 10 100 RESISTIVE OR INDUCTIVE LOAD 0 30 60 90 120 150 NUMBER OF CYCLES AT 50/60Hz AMBIENT TEMPERATURE, INSTANTANEOUS REVERSE CURRENT, MICRO AMPERES FIG.4 -- TYPICAL REVERSE CHARACTERISTIC 100 10 TJ=125 INSTANTANEOUS FORWARD CURRENT, FIG.3 -- TYPICAL FORWARD VOLTAGE KKKKCHARACTERISTICS PER LEG 1.0 0.1 TJ=25 .01 10 0 20 40 60 80 100 1 AMPERES TJ=25 PERCENT OF RATED PEAK REVERSE VOLTAGE,% FIG.5 -- TYPICAL JUNCTION CAPACITANCE PER BBBBBBB ELEMENT CAPACITANCE, pF 100 60 40 20 10 f=1MHz TJ=25 0.1 PULSE WIDTH=300µS 0.01 0.2 0.4 0.6 0.8 1.0 1.2 1.4 INSTANTANEOUS FORWARD VOLTAGE, VOLTS 4 2 1 .1 .2 .4 1.0 2 4 10 20 40 100 REVERSE VOLTAGE, VOLTS www.galaxycn.com Document Number 0287001 BLGALAXY ELECTRICAL 2.