RC2

BL GALAXY ELECTRICAL FAST RECOVERY RECTIFIER FEATURES Low cost Diffused junction Low leakage Low forward voltage drop High current capability Easily cleaned with Freon,Alcohol,Isopropanol and similar solvents The plastic material carries U/L recognition 94V-0 RC2(Z) VOLTAGE RANGE: 2000 V CURRENT: 0.2 A DO - 41 MECHANICAL DATA Case:JEDEC DO-41,molded plastic Terminals: Axial lead ,solderable per MIL- STD-202,Method 208 Polarity: Color band denotes cathode Weight:0.012 ounces, 0.34 grams Mounting position: Any MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ambient temperature unless otherwise specified. Single phase,half wave,60 Hz,resistive or inductive load. For capacitive load,derate by 20%. RC2 Maximum recurrent peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forw ard rectified current 9.5mm lead length, @TA=75 UNITS V V V A VRRM VRMS VDC IF(AV) 2000 1400 2000 0.2 Peak forw ard surge current 8.3ms single half-sine-w ave superimposed on rated load @TJ =125 IFSM 20.0 A Maximum instantaneous forw ard voltage @ 0.2 A Maximum reverse current at rated DC blocking voltage @TA=25 @TA=100 VF IR trr CJ RθJA TJ TSTG 2.0 10.0 300.0 1000 15 50 -55----+150 -55----+150 V A ns pF ／Ｗ Maximum reverse recovery time (Note1) Typical junction capacitance Typical thermal resistance (Note2) (Note3) Operating junction temperature range Storage temperature range N OTE:1. Measured with I F =0.5A, I R=1A, I rr=0.25A. www.galaxycn.com 2. Measured at 1.0MHz and applied rev erse v oltage of 4.0V DC. 3. Thermal resistance f rom junction to ambient. Document Number 0261065 BLGALAXY ELECTRICAL 1. RATINGS AND CHARACTERISTIC CURVES FIG.1 -- REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM 50 N.1. 10 N.1. RC2 trr +0.5A D.U.T. (+) 50VDC (APPROX) (-) 1 N.1. (-) 0 PULSE GENERATOR (NOTE2) OSCILLOSCOPE (NOTE 1) (+) -0.25A -1.0A NOTE S:1.RISETIM =7ns M INP IM E E AX. UT P DANCE =1M .22pF 2.R TIM =10ns M SOURCEIM E ISE E AX. P DANCE =5O SE TIM BASEFOR50/100 ns /cm TE 1cm FIG.2 -- TYPICAL FORWARD DERATING CURVE INSTANTANEOUS FORWARD CURRENT AMPERES 0.25 FIG.3 -- TYPICAL FORWARD CHARACTERISTIC 0.3 TJ=25 Pulse Width=300µS AVERAGE FORWARD CURRENT AMPERES 0.2 0.15 0.2 0.1 Single Phase Half Wave 60Hz Resistive or Inductive Load 0.1 0.05 0 0 25 50 75 100 125 150 0.01 0.1 1.0 2.0 3.0 4.0 AMBIENT TEMPERATURE, INSTANTANEOUS FORWARD CURRENT, VOLTS FIG.4-- PEAK FORWARD SURGE CURRENT FIG.4-- TYPICAL JUNCTION CAPACITANCE PEAK FORWARD SURGE CURRENT AMPERES 20 100 60 JUNCTION CAPACITANCE,pF 40 15 20 10 10 5 TJ=125 8.3m Single Half s Sine-W ave 4 TJ=25 f=1MHz 2 0 1 5 10 50 1 .1 .2 .4 1.0 2 4 10 20 40 100 NUMBER OF CYCLES AT 60Hz REVERSE VOLTAGE,VOLTS www.galaxycn.com Document Number 0261065 BLGALAXY ELECTRICAL 2.