SOD1E2

BL FEATURES GALAXY ELECTRICAL SOD1E1---SOD1E8 REVERSE VOLTAGE: 50 - 600 V CURRENT: 1.0 A SOD - 123FL Cathode Band Top View SURFACE MOUNT RECTIFIERS ◇ Glass passivated device ◇ Ideal for surface mounted applications ◇ Low leakage current ◇ Metallurgically bonded construction ◇ High temperature soldering: 250℃/10 seconds at terminals 1.8 0.1 1.0 0.2 5° 2.8 0.1 0.05 0.30 0.98 0.1 MECHANICAL DATA ◇ Case:JEDEC SOD-123FL,molded plastic over passivated chip ◇ Terminals:Solder Plated, solderable per MIL-STD-750, Method 2026 ◇ Polarity: Color band denotes cathode end ◇ Weight: 0.003 ounces, 0.01 gram ◇ Mounting position: Any 5 0.60 0.25 3.7 0.2 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ℃ ambient temperature unless otherwise specified. Single phase,half wave,60Hz,resistive or inductive load.For capactive load,derate current by 20%. ABSOLUTE RATINGS SOD 1E1 E1 VRRM VRMS VDC I(AV) 50 35 50 SOD 1E2 E2 100 70 100 Device marking code SOD SOD SOD SOD SOD SOD 1E3 1E4 1E5 1E6 1E7 1E8 UNITS E3 E4 E5 E6 E7 E8 150 105 150 200 140 200 1.0 300 210 300 400 280 400 500 350 500 600 420 600 V V V A Maximum recurrent peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current T A=65℃ Peak forward surge current 8.3ms single half-sine-wave superimposed on rated load T L=25℃ IFSM 25 A Maximum instantaneous (NOTE 1) forward voltage at 1.0A Maximum DC reverse current @TA=25℃ at rated DC blocking voltage @T A=125℃ Maximum reverse recovery time (NOTE 2) Operating temperature range Storage temperature range VF IR trr Tj TSTG 0.95 5.0 150 35 1.25 1.7 V µA ns ℃ ℃ - 55 --- + 150 - 55 --- + 150 NOTES:1.Pulse test:300ms pulse width,1% duty cycle. 2.Measured with IF=0.5A, IR=1A, Irr=0.25A. www.galaxycn.com Document Number 0280095 BLGALAXY ELECTRICAL 1. RATING AND CHARACTERISTIC CURVES FIG. 1 - TYPICAL FORWARD CURRENT DERATING CURVE PEAK FORWARD SURGE CURRENT, (A) AVERAGE FORWARD CURRENT, (A) SOD1E1 - - - SOD1E8 FIG. 2 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 25 20 15 10 5 0 1 2 4 6 8 10 20 40 60 80 100 1.0 .8 .6 .4 .2 0 0 25 50 75 100 125 150 175 Single Phase Half Wave 60Hz Resistive or Inductive Load 8.3ms Single Half Sine-Wave (JEDED Method) AMBIENT TEMPERATURE, ( ) NUMBER OF CYCLES AT 60Hz FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG. 4 - TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS FORWARD CURRENT, (A) 100 INSTANTANEOUS REVERSE CURRENT, (uA) 100 SO D1 E1 -SO D1 E4 10 SO SO D1 E5 D1 -SO E7 -SO D1 E6 D1 E8 10 TJ = 100 1 4 1 .4 TJ = 25 0.1 0.01 .4 Tj=25 C Pulse Width=300 s 1% Duty Cycle .6 .8 1.0 1.2 1.4 1.6 1.8 o .1 0 20 40 60 80 100 120 140 INSTANTANEOUS FORWARD VOLTAGE, (V) PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) www.galaxycn.com Document Number 0280095 BLGALAXY ELECTRICAL 2.