SOD1H3

BL FEATURES GALAXY ELECTRICAL SOD1H1---SOD1H8 REVERSE VOLTAGE: 50 - 1000 V CURRENT: 1.0 A SOD - 123FL 1.9± 0.1 SURFACE MOUNT RECTIFIERS ◇ Glass passivated device ◇ Ideal for surface mounted applications ◇ Low leakage current ◇ Metallurgically bonded construction ◇ High temperature soldering: 250℃/10 seconds at terminals Cathode Band Top View 2.8±0.1 1.4± 0.15 0.10-0.30 0.6±0.25 3.7±0.2 MECHANICAL DATA ◇ Case:JEDEC SOD-123FL,molded plastic over passivated chip ◇ Terminals:Solder Plated, solderable per MIL-STD-750, Method 2026 ◇ Polarity: Color band denotes cathode end ◇ Weight: 0.0008 ounces, 0.022 gram ◇ Mounting position: Any Dimensions in millimeters MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ℃ ambient temperature unless otherwise specified. Single phase,half wave,60Hz,resistive or inductive load.For capactive load,derate current by 20%. ABSOLUTE RATINGS SOD 1H1 H1 VRRM VRMS VDC I(AV) 50 35 50 SOD 1H2 H2 100 70 100 Device marking code SOD SOD SOD SOD SOD SOD 1H3 1H4 1H5 1H6 1H7 1H8 UNITS H3 H4 H5 H6 H7 H8 200 140 200 300 210 300 1.0 400 280 400 600 420 600 800 560 800 1000 700 1000 V V V A Maximum recurrent peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current T A=65℃ Peak forward surge current 8.3ms single half-sine-wave superimposed on rated load T L=25℃ IFSM 25 1.0±0.2 A Maximum instantaneous (NOTE 1) forward voltage at 1.0A Maximum DC reverse current @TA=25℃ at rated DC blocking voltage @T A=125℃ Maximum reverse recovery time (NOTE 2) Operating temperature range Storage temperature range VF IR trr Tj TSTG 1.0 1.3 10 200 50 - 55 --- + 150 - 55 --- + 150 1.7 V µA 75 ns ℃ ℃ www.galaxycn.com NOTES:1.Pulse test:300ms pulse width,1% duty cycle. 2.Measured with IF=0.5A, IR=1A, Irr=0.25A. Document Number 0280093 BLGALAXY ELECTRICAL 1. RATING AND CHARACTERISTIC CURVES FIG. 1 - TYPICAL FORWARD CURRENT DERATING CURVE PEAK FORWARD SURGE CURRENT, (A) AVERAGE FORWARD CURRENT, (A) SOD1H1 - - - SOD1H8 FIG. 2 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 25 20 15 10 5 0 1 2 4 6 8 10 20 40 60 80 100 1.0 .8 .6 .4 .2 0 0 25 50 75 100 125 150 175 Single Phase Half Wave 60Hz Resistive or Inductive Load 8.3ms Single Half Sine-Wave (JEDED Method) AMBIENT TEMPERATURE, ( ) NUMBER OF CYCLES AT 60Hz FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG. 4 - TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS FORWARD CURRENT, (A) 100 INSTANTANEOUS REVERSE CURRENT, (uA) 100 SO D1 H1 -SO D1 H3 10 SO SO D1 H4 D1 -SO H6 -SO D1 H5 D1 H8 10 TJ = 100 1 4 1 .4 TJ = 25 0.1 0.01 .4 Tj=25 C Pulse Width=300 s 1% Duty Cycle .6 .8 1.0 1.2 1.4 1.6 1.8 o .1 0 20 40 60 80 100 120 140 INSTANTANEOUS FORWARD VOLTAGE, (V) PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) www.galaxycn.com Document Number 0280093 BLGALAXY ELECTRICAL 2.