UGP30D

BL GALAXY ELECTRICAL SUPER FAST RECTIFIER FEATURES Low cost Diffusde junction low leakage current Easily cleaned with alcohol,Isopropanol and similar solvents z Plastic package has underwriters laboratory flammability classification 94v-0 UGP30A - - - UGP30K VOLTAGE RANGE: 50 --- 800 V CURRENT: 3.0 A DO - 27 MECHANICAL DATA Case:JEDEC DO--27,molded plastic Terminals: Axial lead ,solderable per MIL- STD-202,Method 208 Polarity: Color band denotes cathode Weight: 0.041 ounces,1.15 grams Mounting position: Any MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ambient temperature unless otherwise specified. Single phase,half wave,60Hz,resistive or inductive load. For capacitive load,derate by 20%. UGP30 UGP30 UGP30 UGP30 UGP30 UGP30 UGP30 UNITS A B D F G J K Maximum recurrent peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forw ard rectified current 9.5mm lead length, @TA=75 VRRM VRMS VDC IF(AV) 50 35 50 100 70 100 200 140 200 300 210 300 3.0 400 280 400 600 420 600 800 560 800 V V V A Peak forw ard surge current 8.3ms single half-sine-w ave superimposed on rated load @TJ=125 IFSM 125.0 115.0 A Maximum instantaneous forw ard voltage @ 3.0A Maximum reverse current @TA=25 VF IR trr CJ RθJA TJ TSTG 0.95 5.0 1.25 1.7 2.2 V A ns pF ／Ｗ at rated DC blocking voltage @TA=100 Maximum reverse recovery time (Note1) Typical junction capacitance Typical thermal resistance (Note2) (Note3) 120.0 35 35 20 - 55 ----- + 150 - 55 ----- + 150 Operating junction temperature range Storage temperature range NOTE: 1. Measured with IF=0.5A, IR=1A, Irr=0.25A. www.galaxycn.com 2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 3.Thermal resistance junction to ambient Document Number 0264026 BLGALAXY ELECTRICAL 1. RATINGS AND CHARACTERISTIC CURVES FIG.1 -- FORWARD DERATING CURVE PEAK FORWARD SURGE CURRENT AMPERES AVERAGE FORWARD CURRENT AMPERES 3.0 UGP30A - - - UGP30K FIG.2 --PEAK FORWARD SURGE CURRENT 125 2.5 2.0 1.5 100 8.3ms Single Half Sine-W ave 75 UGP30A-UGP30G 1.0 0.5 0 0 Single Phase Half Wave 60HZ Resistive or Inductive Load 0.375"(9.5mm)Lead Length 25 50 75 100 125 150 175 50 UGP30J-UGP30K 25 0 1 5 10 50 100 AMBIENT TEMPERATURE, NUMBER OF CYCLES AT 60Hz FIG.4--TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE LEAKAGE CURRENT,MICROAMPERES 100 FIG.3 --TYPECAL FORWARD CHARACTERISTIC INSTANTANEOUS FORWARD CURRENT AMPERES 10 D 30 GP -U -U GP 4 P3 30 G 0A 0F 0J P3 P3 UG UG 1 0.4 0.2 0.1 0.04 0.02 0.01 0.2 U UG 2 G P3 0K 10 1 T J =25 Pulse W idth=300 µ s TJ=100 TJ=125℃ 0.1 0.2 0.6 1.0 1.4 1.8 2.2 0.6 1.0 1.4 1.8 2.2 INSTANTANEOUS FORWARD VOLTAGE,VOLTS PERCENT OF RATED PEAK REVERSE VOLTAGE,% FIG.5--TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE,pF 100 60 40 20 10 6 4 2 TJ=25 f=1.0MHZ 1 0.1 0.2 0.4 1 2 4 10 20 40 100 REVERSE VOLTAGE,VOLTS www.galaxycn.com Document Number 0264026 BLGALAXY ELECTRICAL 2.