43WR1LFTR

MODEL 43 3 mm Multi-Turn Sealed Surface Mount Cermet Trimming Potentiometer RoHS compliant MODELS MODELS AVAILABLE J hook surface mount 43W ELECTRICAL ELECTRICAL1 Resistance Range Standard Resistance Tolerance Input Voltage, Maximum Power rating, Watts End Resistance, Maximum Actual Electrical Travel, Nominal Dielectric Strength Insulation Resistance, Minimum Resolution Contact Resistance Variation, Maximum Temperature Coefficient of Resistance 10 Ohm to 2 Megohms ± 20% 200 Vdc or rms, not to exceed power rating 0.125 @ 70°C, derating to 0 @ 150°C 1% or 3 Ohms, whichever is greater 11 turns 600 V AC 100 Megohms Essentially infinite 3% or 3 Ohms, whichever is greater ±100 ppm/°C MECHANICAL MECHANICAL Mechanical Stop Torque, Maximum Weight, Approx. Wiper Position Wiper idles 2.5 in. oz. 0.01 oz. Approx. 50% 1 Specifications subject to change without notice. BI Technologies Corporation 4200 Bonita Place, Fullerton, CA 92835 USA Phone: 714 447 2345 November 8, 2006 Website: www.bitechnologies.com page 1 of 3 BI technologies MODEL 43 ENVIRONMENTAL ENVIRONMENTAL Seal Operating Temperature Range Thermal Shock, 5 cycles, -55°C to +125°C Moisture Resistance, Ten 24 Hour Cycles Shock, 6 ms Sawtooth 100G’s Vibration, 20G’s to 2000 Hz High Temperature Exposure, 250 Hours @ 125°C Rotational Life, 200 Cycles Load Life, 0.125W, 1000 Hours, 70°C Resistance to Solder Heat 85°C Fluorinert® -65°C to +150°C 2% ∆R, 2% ∆V Ratio max. 3% ∆R 1% ∆R, 1% ∆V Ratio max. 1% ∆R, 1% ∆V Ratio max. 2% ∆R, 2% ∆V Ratio max. 3% ∆R 4% ∆R or 4 ohms which ever is greatest, 2% ∆V Ratio max. 260°C for 5 sec. ORDERING ORDERING INFORMATION2 43 R10K XX 43 W R10K LF XX Model Series Pin Style Packaging Option: TR - 7” Tape & Reel TB - Tube RoHS Compliant Product Code Resistance Value PACKAGING INFORMATION PACKAGING INFORMATION Tape & Reel Tape Width Sprocket Pitch Reel Diameter Quantity per Reel Tubes Anti-Static Tubes, all units oriented with #1 pin to the same side 50 units per tube 12 mm 4 mm 7 inches 500 units STANDARD STANDARD RESISTANCE VALUES, OHMS 10 20 50 100 200 500 1K 2K 5K 10K 20K 50K 100K 200K 500K 1 Meg 2 Meg 2 Contact our customer service for custom designs and features. BI Technologies Corporation 4200 Bonita Place, Fullerton, CA 92835 USA Phone: 714 447 2345 November 8, 2006 Website: www.bitechnologies.com page 2 of 3 BI technologies MODEL 43 OUTLINE OUTLINE DRAWING3 Model 43W CIRCUIT DIAGRAM CIRCUIT 3 Dimensions are Inches (mm), Tolerances are ±.01 inch (±.025 mm) unless otherwise stated. BI Technologies Corporation 4200 Bonita Place, Fullerton, CA 92835 USA Phone: 714 447 2345 November 8, 2006 Website: www.bitechnologies.com page 3 of 3 BI technologies