HM64-102R2LF

Electrical / Environmental  oHSnt Ra pli Com Micropower Low Profile Surface Mount Inductors • Operating Temperature Range -40°C to +125°C Specifications @ 25°C Part Number Inductance @100kHz, 0.1 V RMS Zero DC (µH ±20%) with DC (µH Min.) Rated (1) DC Current Amps Isat (2) Amps DC Resistance Ω Max. HM64-101R0LF HM64-102R2LF HM64-104R7LF HM64-10100LF HM64-10150LF HM64-10220LF HM64-10330LF HM64-10470LF Notes: 1.0 2.2 4.7 10.0 15.0 22.0 33.0 47.0 0.80 1.60 3.22 6.96 10.71 15.26 23.59 32.48 1.67 1.40 0.98 0.67 0.54 0.45 0.37 0.31 2.1 1.4 1.0 0.68 0.54 0.45 0.37 0.31 0.103 0.130 0.180 0.240 0.330 0.360 0.550 0.850 (1) Rated DC current is the approximate current at which inductance will be decreased by 30% from it’s initial (zero DC) value or the DC current at which ∆T = 40°C, whichever is lower. (2) Peak Current (Isat) for approximately 30% inductance roll-off. Outline Dimensions (mm) Figure 1 Recommended Solder Pad Layout 7.5 + 0.25 5.7 + 0.3 5.6 0.8 5.1 + 0.2 4.5 1.6 + 0.2 Packaging Standard: Embossed Tape & Reel Reel: Diameter: Capacity: = = 7” (177.8mm) 500 Units 44 MAGNETIC COMPONENTS SELECTOR GUIDE 2007/08 EDITION We reserve the right to change specifications without prior notice. www.bitechnologies.com Electrical Characteristics @ 25°C Ordering Information HM64 Model Series Case Size 10 1R0 LF TR7 TR - Tape & Reel Packing 7 - 7” reel Inductance Code: First 2 digits are significant. Last digit denotes the number of trailing zeros. For values below 10µH, “R“ denotes the decimal point. Lead-Free 2007/08 EDITION MAGNETIC COMPONENTS SELECTOR GUIDE www.bitechnologies.com We reserve the right to change specifications without prior notice 45