0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
AT10XGC-J57

AT10XGC-J57

  • 厂商:

    BOOKHAM

  • 封装:

  • 描述:

    AT10XGC-J57 - High Sensitivity 10Gb/s surface mount coplanar APD preamp receiver - Bookham, Inc.

  • 详情介绍
  • 数据手册
  • 价格&库存
AT10XGC-J57 数据手册
Data Sheet High Sensitivity 10Gb/s surface mount coplanar APD preamp receiver AT10XGC The AT10XGC receiver consists of an avalanche photodiode, a low-noise preamplifier and a precision NTC thermistor in a hermetic coplanar packagewith a connectorized single-mode fiber pigtail. Differential outputs are provided to improve noise rejection for enhanced sensitivity. It has been optimised for use in 10Gb/s metro or long-haul applications, either as a discrete device or within a transponder, using NRZ modulation, with or without FEC, at data rates up to 10.709Gb/s. Features: • High sensitivity, -28.5dBm typical • Low capacitance high speed InGaAs APD photodetector • Supports FEC rates up to 10.709Gb/s • Best in class power consumption, only 300mW • Designed to exceed the environmental requirements of Telcordia GR-468-CORE • RoHS 5/6 compliant Applications: • Client or line side links • 300 pin LR transponder applications • Yellow fiber pigtail for MSA compliance 1 Data Sheet Operating Characteristics Case Temperature = 25°C unless otherwise specified Parameter Optical sensitivity BOL Symbol Sens Measurement Conditions 231-1 PRBS BER 12dB, Q factor > 30, 50% crossing level, 1550nm at 25ºC. RoHS Compliance Bookham is fully committed to environment protection and sustainable development and has set in place a comprehensive program for removing polluting and hazardous substances from all of its products. The relevant evidence of RoHS compliance is held as part of our controlled documentation for each of our compliant products. RoHS compliance parts are available to order, please refer to the ordering information section for further details. Ordering Information: AT10XGC - (Connector) J = SC/PC J57 = LC e.g. AT10XGC-J is an AT10XGC with an SC/PC connector. Other options available on request Contact Information North America Bookham Worldwide Headquarters 2584 Junction Ave. San Jose CA 95134 USA • Tel: +1 408 919 1500 • Fax: +1 408 919 6083 Europe Paignton Office Brixham Road Paignton Devon TQ4 7BE United Kingdom • Tel: +44 (0) 1803 66 2000 • Fax: +44 (0) 1803 66 2801 Asia Shenzhen Office 2 Phoenix Road Futian Free Trade Zone Shenzhen 518038 China • Tel: +86 755 33305888 • Fax: +86 755 33305805 +86 755 33305807 Important Notice Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by Bookham before they become applicable to any particular order or contract. In accordance with the Bookham policy of continuous improvement specifications may change without notice. The publication of information in this data sheet does not imply freedom from patent or other protective rights of Bookham or others. Further details are available from any Bookham sales representative. www.bookham.com sales@bookham.com 6 ISO14001:1996 EMS 504193 TL9000 Rev 3.0 (ISO9001:2000) FM15040 BH12852 Rev 2.0 January 2007. ©Bookham 2006. Bookham is a registered trademark of Bookham Inc.
AT10XGC-J57
1. 物料型号:AT10XGC 2. 器件简介: - AT10XGC是一个高灵敏度的10Gb/s表面贴装共面APD前置放大接收器,包含雪崩光电二极管、低噪声前置放大器和精密NTC热敏电阻,封装在一个密封的共面封装中,并带有单模光纤尾纤。 - 该器件针对10Gb/s城域网或长途应用进行了优化,无论是作为独立设备还是集成在光传输器中,使用NRZ调制,有或没有FEC,数据速率高达10.709Gb/s。 3. 引脚分配: - 1: GND(案例地) - 2: VAPD(APD偏置电压) - 3-5, 7, 12-13, 15-17: GND(案例地或RF地) - 6: VCC(放大器供电+3.3V) - 8: Out_N(负RF数据输出) - 9: Out_P(正RF数据输出) - 10: Out_P(正RF数据输出) - 11: GND(案例RF地) - 14: RTH(热敏电阻) - 16: RTH(热敏电阻) 4. 参数特性: - 光灵敏度BOL(-28.5dBm典型值) - 支持高达10.709Gb/s的FEC速率 - 最佳功耗,仅300mW - 符合Telcordia GR-468-CORE环境要求 - 符合RoHS 5/6标准 5. 功能详解: - 提供差分输出以提高噪声抑制和灵敏度 - 优化用于10Gb/s城域网或长途应用 - 支持FEC,数据速率高达10.709Gb/s - 低功耗设计,仅300mW 6. 应用信息: - 客户端或线路侧链路 - 300针LR光传输器应用 - 黄色光纤尾纤符合MSA标准 7. 封装信息: - 密封共面封装,带有单模光纤尾纤
AT10XGC-J57 价格&库存

很抱歉,暂时无法提供与“AT10XGC-J57”相匹配的价格&库存,您可以联系我们找货

免费人工找货