0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
LC25EW4532ABJ59

LC25EW4532ABJ59

  • 厂商:

    BOOKHAM

  • 封装:

  • 描述:

    LC25EW4532ABJ59 - 2.5Gb/s Buried Het Laser 360km Extended Reach With Optional Etalon Stabilization -...

  • 详情介绍
  • 数据手册
  • 价格&库存
LC25EW4532ABJ59 数据手册
Data Sheet 2.5Gb/s Buried Het Laser 360km Extended Reach With Optional Etalon Stabilization LC25W-B (360km) This laser module employs the Bookham strained layer MQW Buried Heterostructure DFB laser chip, and has been designed specifically for use in Wavelength Division Multiplexed (WDM) 2.5Gb/s long distance optical fiber trunk systems. The device is packaged in a hermetically sealed 14-pin butterfly package incorporating an isolator and monitor photodiode for control of the power of the laser over life and all operating conditions. The device is available with a number of power options depending on application and link span requirements. The optional internal Etalon wavelength stabilization and low chirp performance makes this product compliant with 50GHz optical channel spacing. Features: • 2.5Gb/s operation • +/-95pm wavelength stability over life without Etalon locker • Optional Etalon wavelength stabilization provides 50GHz optical channel spacing compliance for interlay or future upgrade • Narrow spectral line-width • Internal TEC with precision NTC thermistor for temperature control • Entire C & L-band ITU avelengths available (1527nm to 1605nm) • Code reduction with single product for reaches up to 360km • GaInAsP SLMQW DFB single frequency laser chip • InGaAs monitor photo-diode • Hermetically sealed 14-pin butterfly package with optical isolator • RoHS compliant Applications: • WDM • On-off ramps • Long-Haul • DWDM on ITU Grid 1 Data Sheet Parameters Parameter Threshold current (Ith) Slope efficiency by product 2 3 4 7 mW mW mW mW [1] Conditions Min Typ 10 Max 22 0.09 0.13 0.17 0.43 -10 Unit mA 0.04 0.06 0.08 0.143 RF input reflection coef (S11) Forward voltage Peak wavelength (λp) Dispersion penalty at 360 km Time averaged spectral linewidth Side-mode suppression Optical rise/fall time Monitor photo current Monitor dark current Thermistor resistance Heatpump current Heatpump voltage Change of λp with laser temp. Change in λ over life and operating conditions Optical Spectral Window dB V nm dB nm dB 1.3 [2] [3] 1.8 1605 2 1527 -20 dB 32 [4] 0.1 40 0.6 125 50 40 250 250 1200 360 100 10 ps µA nA k Unlocked Etalon locked 70°C case temperature 70°C case temperature 15°C to 35°C Unlocked [5] 250 600 1.0 0.09 900 2.4 mA V nm/°C -45 -9 +145 +9 pm GHz Locked, over life & temperature including chirp [5] [1] 50 measurement system, f = dc - 3GHz. [2] Submount temperature between 20°C to 35°C start of life to achieve required λp. For the 10mW version, submount temperature is between 15°C to 35°C start of life. [3] Standard product dispersion penalty will be compliant to the specified link length of 360km using an extinction ratio of 10dB. Fiber dispersion characteristics are derived from the following equation. Where So =0.092 ps/(nm2.km) and λ = 1302nm. [4] Measurements determined from 20 - 80% pk - pk. [5] For more information on wavelength control and drift over life refer to applications note DR1670. To give symmetrical wavelength performance about the ITU channel wavelength (+/-95pm) offset the laser wavelength by –50pm at start of life set up. So D ( )= ( 4 4 0 3 ) ps /(nm.km) 2 Data Sheet Absolute Maximum Ratings Parameter Case operating temperature Laser submount operating temperature Storage temperature Laser current above Ith Laser reverse voltage Laser reverse current Monitor diode bias Heatpump voltage Fiber bend radius Notes: [1] Product without locker can be tuned onto the next 100 GHz ITU channel in the red shift direction (2x100 GHz tunability) by increasing the submount temperature to a maximum of 43°C. [2] For the 10mW version, the minimum laser submount operating temperature is 15°C. [1] [2] Min 0 20 -40 Max 70 35 85 100 1.0 10 -10 2.4 Unit °C °C °C mA V µA V V mm 30 Reliability/Quality Meets qualification requirements of Telcordia / Bellcore GR468-Core for central office environment. Operating reliability 1510nm CLASS IIIb LASER PRODUCT 6 THIS PRODUCT COMPLIES WITH 21 CFR 1040.10 ISO14001:1996 EMS 504193 TL9000 Rev 3.0 (ISO9001:2000) FM15040 Caution - use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. BH13087 Rev 1.0 January 2007. ©Bookham 2006. Bookham is a registered trademark of Bookham Inc.
LC25EW4532ABJ59
1. 物料型号: - 型号为LC25W-B(360km),是一款2.5Gb/s速率的光器件,适用于波分复用(WDM)系统中的长距离光传输。

2. 器件简介: - 该激光器模块采用了Bookham应变层多量子阱(MQW)埋藏异质结构分布反馈(DFB)激光芯片,专为2.5Gb/s长距离光传输系统设计。模块包含隔离器和监控光电二极管,用于控制激光器的功率。

3. 引脚分配: - 1号和2号引脚为热敏电阻,用于控制激光器子温度。 - 3号引脚为激光器直流偏置(负极)。 - 4号和5号引脚为监控阳极和共用阴极。 - 6号和7号引脚为热电制冷器(TEC)的正负极。 - 8号、9号、11号和13号引脚为外壳地。 - 10号引脚未连接,应接地。 - 12号引脚为激光器调制(负极)。 - 14号引脚未连接,应接地。

4. 参数特性: - 阈值电流:10至22mA。 - 斜率效率:0.04至0.143mW。 - 射频输入反射系数(S11):优于-10dB。 - 正向电压:1.3至1.8V。 - 波长:1527至1605纳米。 - 色散惩罚:360公里时为2dB。 - 光谱线宽:0.1至0.6纳米。 - 边模抑制:32至40dB。 - 光上升/下降时间:125皮秒。 - 监控光电流:解锁Etalon时50至1200微安,锁定时40至360微安。

5. 功能详解: - 该器件支持2.5Gb/s操作,无需Etalon锁定时波长稳定性为±95pm。 - 可选的Etalon波长稳定功能,符合50GHz光信道间隔要求。 - 内部TEC具有精确的NTC热敏电阻,用于温度控制。 - 提供C波段和L波段的全部ITU波长(1527nm至1605nm)。 - 封装为14引脚蝴蝶型,内置光学隔离器。

6. 应用信息: - 适用于WDM、On-off ramps、长距离传输和ITU网格上的DWDM。

7. 封装信息: - 封装为14引脚蝴蝶型,可以提供引脚修剪至3.81mm的选项。
LC25EW4532ABJ59 价格&库存

很抱歉,暂时无法提供与“LC25EW4532ABJ59”相匹配的价格&库存,您可以联系我们找货

免费人工找货