MPE-8071

MPE-8071 70W AC-DC Open Frame Power Supply Input Range: 85~270VDC Industrial Power Supply 12.7 0.5 11.56 TB2 1 7.62 6.48 TRANSFORMER TB3 AC-DC Features Safety Standards *Safety: UL 1950 / CSA 22.2 No.234 / VDE EN60950 *Input Voltage: 85~270VAC *EMI: FCC class B / EN55022B *Input Current: 2A at 115VAC or 1A at 230VAC max. *Inrush Current: Does not exceed 30A at 115VAC input or 60A at 230VAC input, at cold start 25oC, and excluding EMI PIN Output suppression capactiors 1~3 +5V *Load Range: All outputs are at min. load conditions, while 4~6 GND +5V output is between 5~5.1V and all other outputs are within 7 +12V the specified voltage accuracy range 8 -12V *Ripple and Noise: Peak to peak ripple and noise for all outputs is < 1% of output voltage at rated load *Line Regulation: < +/-2% for each output measured at rated Output Min. Rated Max. Voltage Voltage Load Load Load Accuracy load and +/-10% input voltage range +5V 0A 10A 12A 5~5.1V *Load Regulation: < +/-3% for +5V, +/-4% for +12V, and +12V 0A 1.5A 2.5A 11.2~11.6V +/-5% for -12V with +/-40% change on the measured output -12V 0A 0.3A 0.3A -10.8~-12V load, +/-40% from 60% rated load, while keeping other outputs at 60% rated load *Hold Up Time: > 16ms at 115VAC input and rated load, measured from the end of the last charging pulse to when the main output drops down to 95% output voltage *Efficiency: > 70% at nominal line and rated load *Altitude: 10,000 feet *Protection: Latch-off mode against short circuit or over load conditions AC input ON/OFF cycle to restart power supply *Temperature: 0~+50oC (operating); -40~+85oC (storage) *Connectors: AC Input: Molex 5277-02A or equivalent device DC Output: Molex 5273-08A or equivalent device For Fan Use Only: Molex 5045-02A or equivalent device *Dimensions: 12.7 x 7.62 x 3.85 cm at tolerance +/-0.4mm 0.25 3.86 MAX. 0.5 www.boser.com.tw